Samsung SMT-W6100 User manual

Page i

Page ii
All Rights Reserved
Copyright © 2006
The use, disclosure, modification, transfer, or transmittal of this work for any
purpose, in any form, or by any means, without the written permission of the
copyright holder, is strictly forbidden.
VoiceDirector Device Configuration Guide
Samsung SMT-W6100 Wi-Fi Phone
Version 2.0
Disclaimer
The content of this manual is subject to change without notice and should not be
construed as a commitment by the manufacturer, distributor, or service
provider. This manual is furnished for informational use only and the
manufacturer, distributor, or service provider assumes no responsibility for any
errors or inaccuracies that may appear herein.
Any services provided through this equipment are not intended to replace or be
a substitute for primary line voice services or Plain Old Telephone Service
("POTS") and are not meant to provide guaranteed Automatic Number
Identification or Automatic Location Information capabilities associated with 911
or E911 services or to permit access to 411 directory assistance services. The
manufacturer, distributor, or service provider will not be liable for any damages,
expenses, liabilities, risks, or harms arising out of or related to the services
provided through this equipment.
September 2006

VoiceDirector Device Configuration Guide Samsung SMT-W6100
Page iii
Table of Contents
BEFORE YOU BEGIN…....................................................................................... 1
STEP 1 – CONFIGURE THE DEVICE FOR VOICEDIRECTOR ................................. 1

VoiceDirector Device Configuration Guide Samsung SMT-W6100
Page 1
1. Samsung SMT-W6100 Wi-Fi Phone
Before You Begin…
The Samsung SMT-W6100 WiFi Phone can be provisioned for use with VoiceLine
or VoiceDirector.
If you are not a VoiceLine provider, ignore this step, and proceed to
STEP 1 – Configure the Device for VoiceDirector.
If you ARE a VoiceLine provider, and the phone displays a phone number on the
LCD screen, it has previously been provisioned as a VoiceLine device. The
phone’s MAC address must be removed from the Partner Resource Center
(https://partner.net2phone.com) before it can be configured as a VoiceDirector
device.
To remove the device from the Partner Resource Center:
1. Access the Partner Resource Center at https://partner.net2phone.com.
2. In the VoiceLine Support sidebar menu, click View Account List and
locate the account for the device on the View Account List page.
3. Open the account by clicking on any of the links.
4. Select Edit Device Information from the sidebar menu.
5. Click the Close Account button to remove the device from PRC.
6. Wait 5 minutes, then power cycle your phone by turning it off and then
on.
After the phone boots, the display will no longer show a phone number
and the phone is ready to be configured for Voice Director. If the phone
number still appears on the screen, power cycle the phone again.
STEP 1 – Configure the Device for VoiceDirector
To configure the phone for the VoiceDirector network:
Configure Voice Director Proxy, SIP User Name, and Password:
1. Press the Menu softkey.
2. Press the right arrow button and go to 6 Settings.
3. Press the down arrow button and go to 5 Network Settings and press
the OK softkey.
4. Press the down arrow button and go to 4 VoIP Settings and press the
OK softkey.
5. Press the down arrow button and go to 4 Proxy and press the OK
softkey.
6. Enter your Voice Director Server IP address press the OK softkey.
For example: 192.168.0.1
7. Press the down arrow button and go to 9 SIP auth. user and press the
OK softkey.

VoiceDirector Device Configuration Guide Samsung SMT-W6100
Page 2
8. Enter your Voice Director SIP user name and press the OK softkey.
9. Press the down arrow and go to 10 SIP auth. password and press the
OK softkey.
10.Enter your SIP auth. Password in the field and press the OK softkey.
Configure Time Settings:
11.Press the back button (circular arrow soft key) three times to return to
the main Settings Menu.
12.Scroll up to 3 Time and Date Settings and press the OK button.
13.Press the down arrow and go to 3 Set World Time and press the ok
softkey.
14.Using the right and left arrows scroll to the city that is located in your
time zone and press the set softkey. If prompted, select 1 set local if
your time zone is currently NOT observing Daylight Savings Time (DST)
and 2 Set DST if it is.
15.Press the back button (circular arrow soft key) three times to get back to
the Main screen.
Configure Phone Number:
16.From the main window, press the Phonebook softkey.
17.Press the right navigation button once.
18.Select Own number from the menu, and press the OK softkey.
19.Enter 00000000 (eight zeros) as the password, and press the OK
softkey.
20.Enter your Voice Director SIP user name and press the Save softkey.
IMPORTANT:
-This entry must be numeric; alphanumeric characters will not
be accepted.
-This entry must match what was entered in step 8 for the
Voice Director SIP user name.
Configure Voicemail Number:
21.From the Main screen, press the Menu softkey.
22.The Messages screen will appear and 1 Voicemail will be selected. Press
the OK softkey.
23. The Voicemail screen will appear. Press the down arrow to select 2
Voice server number. Press the OK softkey.
24.The Voice server number screen will appear. Press the OK softkey to
select 1 Voice Mail.
25.The Options screen will appear. Press the OK softkey to select 1 Edit
Number.
26.Using the keypad, enter the number you dial to check voicemail and
press the OK softkey.

VoiceDirector Device Configuration Guide Samsung SMT-W6100
Page 3
27.Power cycle the phone by holding the power ( ) button for three
seconds to turn the phone off. Then turn the phone back on by holding
the power button ( ) for three seconds
IMPORTANT: You must reboot the device for the changes to
take effect.