Samsung HL-P6163WX User manual

TaBI÷of (ontents
Connections .................................................................................................... 16
Connecting VHF and UHF Antennas ...................................................................... 16
Antennas with 300-ohm Fiat Twin Leads ..................................................... 16
Antennas with 75-ohm Round Leads........................................................... 16
Separate VHF and UHF Antennas .............................................................. 17
Connecting Cable TV and VCR..............................................................................18
Cable without a Cable Box ....................................................................... 18
CaNe with a Cabie Box that Descrambles All Channels ............................... 18
Connecting a Cable Converter Box ............................................................ 19
Connecting a Cable Converter Box and a VCR ........................................... 19
Connecting a Camcorder ...................................................................................... 20
Connecting a DVD Player ..................................................................................... 21
Connecting to Y,PB,PR...............................................................................21
Connecting to Audio and Video Jacks ........................................................ 21
Connecting a DTV Set-Top Box .............................................................................. 22
Connecting to Y,PB,PR............................................................................... 22
Connecting to DVI (Digital Visual Interface} ................................................. 22
Connecting to R,G,B................................................................................. 23
Connecting to HDM[ (High Definition Multimedia Interface} ..........................23
Operation ........................................................................................................ 26
Turning the TV On and Off ................................................................................... 26
Viewing the Menus and On-Screen Displays ...........................................................26
Selecting the Menu Language ................................................................................ 27
Selecting the Antenna Input ................................................................................... 27
Memorizing the Channels .....................................................................................28
Adding and Erasing Channels ............................................................................... 29
Changing Channels ..............................................................................................30
SelectingYourFavoriteChannds ...........................................................................31
Scanning the Channels ......................................................................................... 32
Labeling the Channeis .......................................................................................... 33
Picture Control ..................................................................................................... 34
Sound Control ..................................................................................................... 36
Setting the Clock .................................................................................................. 38
Setting the Timers ................................................................................................. 39
Viewing an External Signal Source ........................................................................41
Assigning Names to External Input Mode ............................................................... 42
Freezing the Current Picture .................................................................................. 43
Remote Control VCR/DVD Buttons..........................................................................43
Special Features ...............................................................................................46
Customizing Your Remote Control .......................................................................... 46
Remote Control Codes .......................................................................................... 47
Fine Tuning Channds ...........................................................................................48
LNA (Law NaiseAmplifier}....................................................................................49
SdectingtheCaJorTone........................................................................................50
Changing the Picture Size ..................................................................................... 51
Digital Noise Reduction ........................................................................................ 52
DNle TM (Digital Natural Image engine)_ ........................................................... 53
Setting the MCC (My Color Control} Mode ............................................................. 54
Setting the Film Mode ........................................................................................... 56
Viewing Picture-In-Picture....................................................................................... 57
Activating the PIP.....................................................................................57
Selecting an External Source ..................................................................... 58
Swapping the Sub Picture and Main Picture ................................................ 59
Changing the Size of the Sub Picture ......................................................... 60
Changing the Location of the Sub Picture ....................................................61
Changing the Channel of the Sub Picture.................................................... 62
Selecting the Sound Source ....................................................................... 63
Setting the SRSTSXT............................................................................................. 64
Choosing a Muiti-ChanneJ Sound (MTS) track .......................................................... 65
Auto Volume ........................................................................................................ 66
Enjoying the Sound of External Speakers ................................................................ 67
Using the V-Chip (USA}........................................................................................68
Viewing Closed Caption Information ......................................................................74
Setting the Blue Screen Mode ................................................................................ 76
Setting The On/Off Melody .................................................................................. 77
Using the Color Weakness Enhancement Feature .....................................................78
PC Display ....................................................................................................... 80
Using Your TV as a Computer (PC) Display ............................................................. 80
How to Connect Your PC to the TV............................................................. 80
Setting up Your PC Software (Based on Widows 98} ...................................81
Display Modes ......................................................................................... 82
Adjusting the Picture Quality ................................................................................. 83
Changing the Picture Position ................................................................................ 84
Adjusting the Picture Quail b, and Position Automatically ........................................... 85
Initializing the Picture Settings ................................................................................86
Changing the Picture Size (PC Mode} .....................................................................87
2 3

YourNewWi@TV
RepB@gtheLamp
Why d@ J need to, replace the Janlp?
The lamp used in a projection TV has a limited Jifespan. For the best screen quality it needs to be
replaced periodically. After replacing the lamp, the screen quality wiJJ be bright and dear as new.
When do ! need to rel_Jace it?
it should be replaced when the screen becomes darker, Jessdear or when all three LEDson the front
(Timer, Lamp, & Temp.) are flashing.
Check befere lamp replacement
1. The lamp must be the same code number and type.
2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case.
3. After checking the code number for the lamp, give the code number to the store where you
purchased the TV or to a Samsung Service center.
Caution
1. Replace with the correct code numbered lamp to avoid damage to the TV.
2. Turn the power off and wait far 30 minutes before replacing the lamp as it will be hot.
3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object inside
the cover as it may cause poor screen quality, electric shock or fire.
4. Do not place the old lamp near flammable objects or within the reach of children.
o Forreplacement,yauwillneeda5.91Inches-10ngPhillipsscrewdriveranda pairof gloves.
Unplug TV, then use a
screwdriver to remove the
screw.
Removethe Lampcover.
Remove the screws securing
the Lamp by using a
screwdriver.
Separate the Lamp from the
engine by hoiding the handie
and pulling it out.
To reinstall the Lamp, follow
these steps in reverse order.
oBe sure the replacement Lamp is the same type,
oAf,_erreplacing the lamp, align the lamp cover with the groove and secure the screw,
oTheTV will not turn on if the lamp cover is not correctly closed las this will activate the
protective circuit),
6 7

YourNewWideTV
ListofFeatures
Your TV was designed and engineered using the latest technology, it is a fuji-featured, high-performance
unit that exceeds industry standards. In addition, it has these special features:
® Easy-to-operate remote control
® Easyto-use on-screen menu system you can access from the side panei or remote control
® Automatic timer to turn the TV on and off at any time you choose
® Adjustable picture and sound settings and the ability to memorize your favorite settings
® Automatic channel tuning for up to 181 channels
® A special filter to reduce or eliminate reception problems
® Fine tuning control for the sharpest picture possible
® A buiJtdn multi-channel sound decoder for stereo and bilingual listening
® Built-in, dual channel speakers
® A special sieep timer
® Picturedn-Picture capability that lets you watch two channels at once
®Widescreen TV with adjustable image size
® Life-like clear images provided by DNIe technology
® MCC (My Color Control) Mode for corresponding with your color style
o Color weakness Mode
Once you have unpacked your TV, check to make sure that you have all the parts shown here. If any
piece is missing or broken, call your dealer.
Remote (:ontrom
{BP59-OOOaSB)/
AAA Batteries
(430J -OOOJ03)
Waccanty€ands (21/
Registcatien ¢accJ(J} Instcudion ManuaJ/ Safety GuideManual/
@ukk@_ideManual
Pressu0lowerorruiseuhevolumeundU0sded iUemswhenusinguhe0n-screenmenu.
-- PressUochungechunndsundmovebetweeniuemsonUheon-screenmenu.
PressUoucUivuUe(orchunge}nporfic@riUem.
SidePandJacks
Use the right side panel jacks to connect a component that is used only occasionally (a camcorder
or video game, for example).
Conneduhevideosigndfromocomcorderorvideogume.
Conneduheundiosigndfromo comcorderorvideogume,
S VIDEO 3
ConneduuS-videosigndfloraucumcorderorvideogume.
(S-Video3 iuckundAudioL/Rinpuu3oreusedinconinncfion,)
8 9

YourNewWideTV
FrontPeneJLEDIndicetors
The three lights on the front panel indicate the status of your TV.
%
%%
• : Light is On
_: Light is Blinking
0 : Light is Off
T_aER LAt_P STANDBY/TEf_P lndicotio,
0 0 • Standby state.
0 OI 0 The picture will automatically appear in about 15 seconds.
Auto Timer ON/OFF has been set and the set wiJJautomatically be
• _ Q turned on in about 25 seconds.
0 Cll A cooling fan inside the set is not operating normally.
0 _ OI Lamp cover on rear of the set is not properly shut.
Check if the ventilation hole on the rear of the set is blocked, because if
0 0 _ the inner temperature is too high, the power wiJJshut off.
_ _ Lamp may be defective. Please contact a certified technician.
it takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
• The TV has a fan to keep the inside lamp from overheating_ You'll occasionally hear it working_
RearPondJacks
Use the rear panel jacks to connect components such as a VCR_ You can connect different components
such as VCRs, Set-Top Box and a DVD player etc_, because there are _'o sets of video input jacks and
three set of component video input jacks on the rear panel of your TV For more information, please see
"Connections".
@
@
@
0
@
ANTENNA terminals
Twoindependen_cuhbsorun_ennusrunbeconnecuedueuheseuerminds,
Use"ANT1iN"end"ANT2iN"uerminolsUoreceiveu signulfrom
VHF;"UHFunuennuseryonrcobbsysuem,Useuhe"ANT1OUT"uerminuluo
sendUhesignulbeingreceivedByUhe"ANT1iN" Uermin01euUUe0n0_her
compenen_fsnchusurubleSe_-TopBox).ThePiPchunndrunbereceived
onlywhenusignulsenrceisconnecueduo"ANT1 IN".
S-ViDEO iNPUT ju_:ks
¢onnecusunS-VideosigndfromunS-VHSV¢RorDVDpluyer.
VJDEO/AIJDIO iNPUT jacks {VCRJ, VCR2)
¢0nnecuvide0/uudi0signdsfromex_ernulsenrces,suchusuVCRorDVD
pluyers.
ViDEO/AUDiO OUTPUT jacks
Sends0 videosignulfromUheTV_eonexuernulsource,suchusuV¢R.
Ne_e:I_isuvuilubleonlyinRF,VideoundS°Videomodes.
¢[email protected], 2 j_¢ks {_ Pc, PR, L. R)
Use_heseiucks_ec0nnec__hec0mpenen_vide0!uudi0signulsfrom0 DVD
pluyeroruse__opboxwhennsing_hecompenen_videoinpn_iocl(s.
@
@
@
@
@
@
P( A_DJO iNPUT i_cks
Cennec__hese_e_heundieen_pn_iucksonyeurPC.
P¢ VIDEO INP_T j_¢k
Cennec__hese_e_hevideoeu_pu_iuckonyeurPC.
DVl (Digital Vide_ Jmterf_:e} AL|_IO iNPUT j_:ks
Cennec__e_hedigi_uluudieeu_pu_iucksfordevicewi_hDVIen_pnL
DVl (Digital Vide_ Interf_:e} VIDEO iNPUT j_¢k
Cennec__e_hedigitalvideoen_pn_iuckfordevicewi_hDVIeu_puL
HJ)_l (Nig_ J]efir_iti_ _eJtimedi_ Ir_terf_:e}
ViDEO/AUDiO iNPUT j_¢k
Connec__o_heHDMIiuckfordevicewi_hHDMIon_puL
SERVICE
This]ucl_isforrepuirundsoftwarenpgrudes.
10 11

YourNewWideTV
Remote{ont d
You can use the remote control up to about 23 feet from the TV. When using the remote control, always
point it directly at the TV_You can also use your remote control to operate your Set-Top box, VCR, Cable
box or DVD player. See pages 46~47 for details.
1. POWER 17.
Turnsthe_Joeendoff.
2. SoMODE
Adiustthel_Jsoundbysdedingoneofthe
presetfedorysettings(orstiedyourpersonal, 'J8o
customizedsoundsettiegs.)
3° P.MODE
Adiustthe_Jpidurebysele@gooeof tbe
presetfodorysettings(orstiedyourpersonal, 'J9o
customizedpktoresetlingsj
4. +l O0 20.
Pressto selectrobbrheeodsover100on_/.
5. VOL +, VOL -
Pressto ierreoseorderreosetbevdume.
6. MUTE 21.
Pressto mutetheTgsound.
7. FAVo(:H(Favorite K::hannei)
Pressto swikhben,'eonyourfavoritechonnds. 22o
8. MENU
Disp[oysthemoinoe-s_reenmenu. 23o
9. STILL
Pressto stoptireodioeduringoportkolor
s_one.Pressagointo resumenormalvideo.
JOoPoSJZE 24°
Pressto changetimpkluresize.
ll. MOI)E
Seledso turgotdevketo becontrolledbythe
Somsungremote_ontrol(i.e.,Tg,STB,V(R,
CABLE,orDVD).
12. PRE-CH
beestothepreviouschennd.
13. TViVmDEO
Pressto disploydl dtheevoi[obbvideo
sources(i.e.,1_,Set-Topbox,VCR,DVD,DTV,
PQ.
14. (HA, CHV
Pressto dmngechoonds.
IS. INFO
Pressto disployieforntotiononthe_/screen.
J6. EXiT
Pressto exiltheroeeo.
A, v, % I_, ENTER
PresstosoledbighliglHup,down,left,or dgbt
Wbileusingtheon-screenmenus,pressthe
ENTERtoectivote(orchonge)oporficuIoritem.
MTS {MnitkhanneJ
Television S'_er÷o)
PresstodtooseStereo,MenuorSAP(Secondary
AudioProgrom).
SRS
Adiv@sTroSurround.
ADD!DEL
Press1ooddor erosecbonnelsin tbe1%
melnory,
UsetheADD/DELbuttontomemorizeenderese
thefinetuningofferfinetuning_hmmds.
SLEEP
Presstostiedo presettimeintervalfor
eutomotkdtotoff.
PiP (Pktnre in Pictnre)
AdivotesPIR
SET
Usedduringsetupofibisremotecentral,so
thatit wi[[workcompotiblywithotherdevices
(Set-Topbox,V(R,Cobbbox,DVD,etc.)
DNJe(Digital Natnrai
image engine}
A_ti'_otesDNb.
25. PiP Centrals
SIZE;Pressto selectthesizeofPiPwindow.
SWAP;Press1oexdtoegetirevideosignaltirol
iscorrectlydisp[oyedonthemoinscreenwitb
thesigndintirePiPwindow.
¢HA/V; Pressto disploytheevoiloble
chonnelsin sefiuee(o.(Thesebuttons_hmtge
chonnelsin thePIPwindowonly.)
26. VCRiDV|) Centrals
CoetrolsV(RorDVDfmlctions:Rewind,Stop,
P[oy/Pouso,FestForword.
27° RESET
[fyourremotecontro!isnotfun@ning
properly,tekeouttbebotteriesendpresstbe
resetbuttonforabout2-3 seconds.Re-inso4
thebotte@sandtryusingtheremotecontrol
egoin.
[
E
jJ
@
Jsstd[ing Batteries in tBeRemote(ostrd
With normal use, the batteries in the remote control should last about a year. If you notice a performance
degradation while using the remote, the batteries may need to be replaced. Make sure you replace both
batteries and do not mix old and new batteries in the remote control. If you won't be using the remote
control for a long time, remove the batteries and store them in a cod dry place.
Slide the back cover all the way out
to open the battery compartment of
the remote control.
install _'o AAA size batteries.
Make sure to match the "+" and
"-" ends of the batteries with the
diagram inside the compartment.
Slide the cover back into place.
12 13

(0nnecti0ns
ConnectingVHFandUHFAntennas
if you do not have a cable system, you wiJJneed to connect an antenna to your TV.
Antennaswith 3@0o@mHat T_dnLeads
if your antenna looks like this: it has 300-ohm fiat twin leads.
Place the wires from the _'in
leads under the screws on the
300-75 ohm adaptor (not
supplied}. Use a screwdriver
to tighten the screws.
Plug the adapter into the
:: "ANT 1 IN" terminaI on the
rear panel.
AntennaswitB 7go@BinR@undLeads
if your antenna looks like this: it is an antenna with 75-ohm round leads.
Plug the antenna lead into the
"ANT 1 iN" terminal on the
rear panek
SeparateVHFandUHFAntennas
If you have two separate antennas for your TV (one VHF and one UHF}, you must combine the
two antenna signals before connecting the antennas to the TV. This procedure requires an optional
combiner-adaptor (available at most electronics shops).
Connect both antenna
leads to the combiner.
Plug the combiner into the
"ANT 1 IN" terminal on
the rear panel.
16 17

C0nnecti0ns
Connecting@bWeTVandVCR
You can connect different cable systems to your TV, including cable without a cable box, and
cable with a cable box that descrambJes some or aJJchannels.
@BJ÷withouta @BJeBox
If you want to connect cable, and you do not need to use a cable box:
Plug the incoming cable
into the "ANT 1 IN"
terminal on the rear panel.
@BJ÷witha CaBJ÷Boxthat D÷scramBJ÷sAJJ@annals
Find the cable that is
connected ta the
ANTENNA OUT terminal
on your cable box. This
terminal might be labeled
"ANT OUT", "VHF OUT"
or simply, "OUT".
Connect the other end of
this cable to the "ANT 1
IN" terminal on the rear
panek
C@_nectinga @BJ÷C@nverterB@×
This connection allows you to watch cable and premium channels. You should keep your TV
selected to "ANT 1 IN" so that you can use the TV features. When viewing premium channels,
select "ANT 2 IN" and tune the TV to channel 3 or 4 (whichever channel is vacant in your area},
then use the converter box to change channels You wiJJneed _'o coaxial cables.
From When you use a converter box with
your TV, there may be features that you
can not program using the remote
control, such as programming your
favorite channels and blocking
channels.
The output from "ANT 1 OUT" is
available when select "Ant.2" in the
"Antenna" channel menu.
(@nn÷¢tinga @BJ÷(@nv÷rt÷rB@×an4aV(R
This connection allows you to watch and record basic and premium cable channels, as well as
watch videotapes. You should keep your TV selected to "ANT 1 IN" so that you can use the TV's
features. When viewing premium channels or recording with the VCR, select "ANT 2 IN"
(whichever channel is vacant in your area), then use the converter box to change channels.
From
Cable
TV Rear Panel Caution: If you want to record one channel
while watching another channel, a splitter
(not included} must be added between the
cable and "ANT 1 IN". One output of the
splitter goes to "ANT 1 OUT" and the
second output is connected to IN on the
cane converter box.
If you have a mona VCR, connect L/Mona
to VCR Audio OUT using only one audio
cane.
Stereo VCR
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
Do not connect the video cable and the
S-video cable to video1 simultaneously.
When you use a converter box with your
TV there may be features that you can not
program using the remote control, such as
programming your favorite channels and
blocking channels.
18 19

(0nnecfi0ns
[onnecfinga@mcor@
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
Locate the A/V output jacks
on the camcorder. They are
usually found on the side or
back of the camcorder.
Connect a set of audio
cables be_'een the AUDIO
iN jacks on the TV and the
AUDIO OUT jacks on the
camcorder, if you have
mono camcorder, connect
L(mono) to camcorder audio
out using only one audio
cane.
Connect a video cable
between the VIDEO iN (or
S-VIDEO iN) jack on the TV
and the VIDEO OUT jack
on the camcorder. The
audio-video cables shown
here are usually induded
with a Camcorden (if not,
check your local electronics
store_} if your camcorder is
stereo, you need to connect
a set of two cabJes_
TV Side Panel
Camcorder
Output Jacks
Camcorder
ConnectingaDVDPlayer
The rear panel jacks on your TV make it easy to connect a DVD player to your _'
(@nnectingt@¥,?8,?R
Connect a set of audio
cables between the
COMPONENT (1 or 2)
AUDIO (L,R)IN jacks on the
TV and the AUDIO OUT
jacks on the DVD player.
Incoming
Cable or
Antenna
TV Rear Panel
2!11
To enable Component video
viewing, connect a set of
video cables between the
COMPONENT (1 or 2}
VIDEO (% PB,PR)IN jacks
on the TV and VIDEO
(Y/PsiPR or Y/Cs/Q) OUT
jacks on the DVD player.
Note: For an explanation of
Component video, see your
DVD player's owner's
manual.
(@nn÷¢tingt@audi@andvi4÷@ia&s
Connect a set of audio
cables between the AUDIO
IN (1 or 2) jacks on the TV
and the AUDIO OUT jacks
on the DVD player. Incoming
Cable or
Antenna
TV Rear Panel
Connect a video cable
be_'een the VIDEO iN (1
or 2) jack on the TV and the
VIDEO OUT jack on the
DVD pJayer_
DVD Player
DVD Player
20 21

(0nnecti0ns
ConnectingaDTVSet-TopBox
Conn÷_tingto Y,PB,Pa
Connect a set of audio
canes between the
COMPONENT (1 or 2)
AUDIO (L,R)IN jacks on the
TV and the AUDIO OUT
jacks on the Set_TopBox.
21Connect a set of video cables between the
COMPONENT (1 or 2)
VIDEO (% PB,PR)IN jacks
on the TV and VIDEO
(YiPBiPR or YiCBiCR) OUT
jacks on the Set-Top Box.
Note: For an explanation of
Component video, see your
Set Top Box owner's
manual.
Incoming
Cable or
Antenna
Canne_tingt@DVJ@igitd VisualInterface)
Connect a set of audio
cables between the DVI
AUDIO (L,R)IN jacks on the
TV and the AUDIO OUT
jacks on the Set_TopBox.
Connect a video cable
between the DVI IN jack on
the TV and the DVI OUT
jack on the Set_TopBox.
Incoming
Cable or
Antenna
TV Rear Panel
DTV Set Top Box
TV Rear Panel
DTV Set Top Box
Cenaectingte R,G,B
Connect a set of audio
cables between the PC
AUDIO (L,R)IN jacks on the
TV and the AUDIO OUT
jacks on the Set-Top Box.
2Connect a video cable
between the PC IN jack on
the TV and the R.G.B OUT
jack on the Set_TopBox.
TV Rear Panel
Incoming
Cable or
Antenna
TV Rear Panel
Phase check if the power of
HDMf source is on, in case that
you bil to sebct HDMI from the
"Source List" even after you
connected the cable of HDMI
source IDTV 5ehTop Box, DVD,
etc.) to TV. Incoming
Cable or
Antenna
DTV Set Top Box
22 23

Operation
TurningtheTVOnandOff
Pressthe POWER button on the remote controk
You can also use the POWER button on the front panel.
ViewingtheMenusandOnoScreenDisplays
The omscreen menu system allows you tocontrol the settings of your TV_Access the on-screen menu
system by pressing the MENU button on the remote controk Once the on-screen menu appears, use
the A/Ti4/_iENTER on your remote control to select menu items and make adjustments.
You can also view the omscreen menu system and make some adjustments using the TV's side
panel buttons.
tB÷Menus
Pressthe MENU button.
The main menu is displayed.
There are five menu groups:
q nput", "Picture", "Sound",
"Channel" and "Setup".
2Pressthe A or T button to
select to an item you want in
the menu.
Pressthe 4, I_ or ENTER
button to display, change, or
use the selected items.
Use the ENTER button to
enter items in the menu.
Pressthe EXITbutton to exit.
Press the INFO button on the
remote control.
The TV displays the current
channel, the status of certain
picture and sound settings and
the current time.
SdectingtheMenuLanguage
Choose a language for the omscreen menus: English, Spanish or French.
_OWER
Pressthe MENU button.
Pressthe _, or V button ta
select "Setup", then press the
ENTERbutton.
Pressthe ENTERbutton to
select "Language".
Pressthe A or T button to
select the appropriate
language, then press ENTER
button.
Pressthe EXITbutton to exit.
SelectingtheAntennaJnpu_
You can connect to two different signal sources by choosing the antenna input
(1 or 2).
Press the MENU button.
Press the A or T button to select
"Channel", then press the ENTERbutton.
Press the ENTER button to select
"Antenna".
Press the A or _r button to select "Ant. 1"
or "Ant.2", then press ENTER button.
Press the EXITbutton to exit.
26 27

Operation
MemorizingtheChannels
Your TV can memorize and store all of the available channels for both "off-air" (antenna) and
cable channels. After the available channels are memorized, use the CHA and CHv buttons to
scan through the channel This eliminates the need to change channels by entering the channel
digits_ There are three steps for memorizing channels: selecting a broadcast source, memorizing
the channels (automatic) and adding/deleting channels (manual).
o } :}
SelectingtB÷Vide@SignalSour€÷
Before your TV can begin memorizing the available channels, you
must specify the type of signal source that is connected to the TV
(i.e., an antenna or a cable system).
Pressthe MENU button.
Pressthe ,A or V button ta
select "Channel", then press
the ENTER button.
Antenna : Ant,1
Auto Program _'
Add/Delete _'
Favorite Channels _'
Name _'
FineTune _'
v More
2Pressthe A or _' button to
select "Air!CATV", then
press the ENTER button.
If you are connected to an
antenna, press the A or _'
button to select "Air".
If you connected cable,
press the A or T button to
select the type of cable
system: "STD", "HRC" or
qRC".
Pressthe EXiTbutton to exit.
o"STD', "HRC" and "IRC" identify various types of cable. TV
systems. Contact your local cable company to identify the type
of cable system that exists in your particular area. At this point
the signal source has been selected. Proceed to "Storing
Channel's in Memory".
Subscription cable services require service-specific requirement
br viewing.
Storing (:hannds in Men,cry (AutomaticMe_hea}
First, sdect the correct signal source ("Air", "STD", "HRC" or "IRC") as
described on the previous page.
Press the MENU button.
Press the ,A or V button to select
"Channel", then press the ENTERbutton.
Press the A or '_' button to sdect "Auto
...................Program", then press the ENTERbutton.
Press the ENTERbutton to start the auto
program.
The TV begins memorizing all of the
available stations.
Press the ENTER button at any time to
interrupt the memorization process.
Press the EXiT button to exit.
Antenna : Ant1
Auto Program _,
_i_7_eJ_e....................................................................
Favorite Channels
Name
FineTune
V More
AddingandErasingChannels
You can add channels that were not memorized or delete unwanted channels
from memory.
Press the MENU button.
Press the ,A or V button to select
"Channel", then press the ENTERbutton.
Press the A or Y button to select
..................."Add/Delete", then press the ENTER
button.
Press the EXiT button to exit.
Air÷mat÷meth0a
Simply press the ADD/DEL button on the remote control to add or ddete channds.
28 29

Operation
ChangingChannels
You can change channels on your TV by using the CHA and CHv buttons, or by direct
selection using the number buttons_ You can use the number buttons to tune to any channel (even
one that has been erased or has not been memorized).
VOL
the(hannd Butt0ss
Press the CHA or CHv button to change channels.
When you press the CHA or CHv button, the TV changes
channels in sequence. You w,iJl see all the channels that the TV has
memorized. (The TV must have memorized at least three
channels.) You wiJJnot see channels that were either erased or not
memorized.
theNumBerButtons
Press the number buttons to go directly to a channel.
When you use the number buttons, you can directly select
channels that were either erased or not memorized.
For example, to select channel "27", press the "2", then "7"_
The TV wiJJchange channels when you press the second number.
To change to single-digit channels (0-9) faster, press the "0"
before the single digit. (For channel "4", press the "0", then "4".)
To select a channel over 100, press the + 100 button. (For channel
"122", press the +100 button, then "2", then "2".)
tB÷Previous(banneJ
Press the PRBCH button.
The TV changes to the last channel you were watching.
SdectingYourFavorite@ann@
You can store your favorite channels for each available input source (suchas TVand CATV)_
This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH
button on the remote control.
VO_ CH
i i i
T@St@reYss_ Fay@rite@anne[s:
Pressthe MENU button.
Pressthe Aor Y button to
select "Channel", then press
the ENTERbutton.
,? Pressthe A or T button to
select "Favorite Channels",
then press the ENTERbutton.
Pressthe A or T button to
select a channel, then press
the ENTERbutton.
Pressthe ENTERbutton
again to deselect the
selected channel.
Pressthe EXff button to exit.
Air 3
Air 4
Air B
Air 6
Air 7
Air 8 ---
T@View Y@srFay@rite@annds:
Pressthe FAV.CH button repeatedly to jump from one favorite
channel to another.
•Only memorized channels can be set as Favorite channels.
30 31

Operation
ScanningtheChannels
The TV automatically scan all of the channels it has memorized.
Pressthe MENU button.
Pressthe A or V button to
select "Channel", then press
the ENTER button.
Pressthe A or • button to
select "Scan", then press the
ENTERbuttom
The TV scans aJJof the
channels memorized.
Pressthe EXITbutton to exit.
Air 3
Air 4
oWhen the "ANT 2 IN" mode is selected, the channel scan
function works on the main picture only.
LabelingtheChannels
Use this feature to assign an easy-to-remember label to any channel (ke., "CBS', "ESPN",
"PBS2", CNN1 ", etc.) A label consists of five fields, where each field is a letter, a number or a
blank When the INFO button is pressed, the channel label wiJJappear next to the channel
numben
I i i i
oIf you add or debte
the TVchannel, the
labeled channels list
will also be added or
deleted.
Pressthe CHA or CHv button to tune to the channel that
wiJJbe labeled.
Pressthe MENU buttom
Pressthe A or T button to
select "Channel", then press
the ENTERbutton.
Pressthe A or T button to
select "Name", then press
the ENTERbutton.
Pressthe AiTi_/_ button
ta move to the channel to be
assigned to a new name,
then press the ENTER button.......
Pressthe A or T button to
select a letter, a number or a
blank_ (Resultsin this
sequence: A...Z, _, blank,
0...9,d.
....d',i....Pressthe _ button to switch
to the next field, which wiJJ
be seJecte&
Select a second letter or digit
pressing A or T button, as
above_
Repeat the process to select
the last two digits.
When you have finished,
press the ENTER buttam
To erase the assigned new
name, select "Clear" by
pressing the AiTi_/_
button, then press the ENTER
button.
Pressthe EXITbutton to exit.
32 33

Operation
PktureControl
You can use the on-screen menus to change the "Contrast", "Brightness", "Sharpness", "Color"
and "Tint" according to personal preference. (Alternatively, you can use one of the automatic
settings. See next page.}
o"h'nt" doesn't operate
in PC, DVI, HDMI or
480p-Component or
higher modes.
tB÷Pktur÷
Pressthe MENU button.
Pressthe A or T button to
seiect "Picture", then press
the ENTER button.
,,':, Pressthe ENTERbutton to
seiect "Mode".
Pressthe A or T button to
select a particular item, then
press the ENTER button.
Pressthe _ or _ button to
increase or decrease the
vaiue of a particular item.
..........................._t;Z4_;_..................
Brightness 50
Sharpness 50
Color 50
Tint 50 50
Beset
R÷setti_gthe?ktur÷ Settingste theFactery#da@s
You can return to the factory default picture settings.
....,dli....
Pressthe MENU button to
display the "Mode" menu.
Pressthe A or T button to
select "Reset", then press the
ENTERbutton.
The previously adjusted
picture settings wiJJbe reset
to the factory defaults.
UsingAut÷matkPktureSettings
Your TV has automatic picture settings ("Dynamic", "Standard" and "Cinema"}
that are preset at the factory. You can activate either "Dynamic", "Standard" or
"Cinema" by pressing the P.MODE button (or by making a selection from the
menu}. Or, you can select "Custom" which automatically recalls your
personalized picture settings.
Press the MENU button.
Press the A or T button to select
"Picture", then press the ENTERbutton.
Press the ENTER button to select "Mode".
Press the ENTER button again to select
"Mode".
Press the A or _' button to select a
particular item, then press the ENTER
button.
Press the EXITbutton to exit.
Alternate_÷thed
Pressthe PMODE button on the remote control
repeatedly to select one of the standard picture
settings.
® Choose "Dynamic" for viewing the TV during the day or when there is a
bright light in the room.
_, Choose "Standard" for the standard factory settings.
*Choose "Cinema" when viewing a movie.
34 35

36
Operation
SoundContrd
You can control and customize the sound levels and settings of the Bi with the remote control.
iiiiiiiiii[
-'-,--..._ J
the Vdum÷
Press the VOL÷ or VOL- buttons to increase or decrease the
volume_
UsingtheMUTEButton
At any time, you can temporarily
cut off the soun&
Press the MUTE button on the
remote controk
The message "Mute" is displayed
and the sound cuts off.
To turn mute off press the MUTE
button again or, press either the
VOL÷ or VOL- button.
@st@mizingthe Sound
The sound settingscon be adjustedtosuityour personal
preference_(Alternafivdy5you con useone oftheautomatic
settings.See nextpage.1
Pressthe MENU button.
Pressthe A or V button to
select "Sound", then press
the ENTER button.
E4_Ziizer...........................................................................
SRS TSXT : Off _,
MTS : Stereo
Auto Voklrne : OFF _'
Internal Mute : Off _'
Presstheor• buttonto
select "Equalizer", then
press the ENTER button.
Continued._
Press the 4 or I_ button to select a
particular item to be change&
Press the A or T button to increase or
decrease the vaiue of a particular item.
Press the EXITbutton to exit.
UsingAut@matkSoundSettings
Your TV has automatic sound settings ("Standard", "Music", "Movie" and "Speech") that are
preset at the factory. You can activate these sound settings by pressing the &MODE button (or by
making a selection from the menu), or you can select "Custom", which automatically recalls your
personalized sound settings.
Press the MENU button.
Press the A or T button to select "Sound"
then press the ENTERbutton.
,? Press the ENTER button to select "Mode".
Press the A or V button to select a
particular item, then press the ENTER
button.
Press the EXITbutton to exit.
Mode iZ Z!
Eq ua l izer
SRSTSXT
MTS
Auto Volume
Internal Mute : Off
Air÷mat÷m÷th04
Pressthe SMODE button on the remote control
repeatedly to select one of the standard sound
settings.
Choose "Standard" for the standard factory settings.
® Choose "Music" when watching music videos or concerts.
® Choose "Movie" when watching movies.
'_ Choose "Speech" when watching a show that is mostly dialogue (Le, news}.
Choose "Custom" to recall your personalized settings.
37

Operation
Se ingthedock
Setting the clock is necessary in order to use the various timer features of the TV. Also, you can
check the time while watching the TV. (Justpress the INFO button.}
VOL ¢H
P.SZE _ILL
Pressthe MENU button.
Pressthe A or T button to
select "Setup", then press the
ENTERbutton.
Pressthe A or _' button to
select "Time", then press the
ENTERbutton.
PresstheENTERbuttonto
select "Clock Set".
Pressthe _ or _ button to
move to "Hour", "Min" or
"amipm'.
Set the clock you want by
pressing the A or T button,
then press the ENTERbutton.
Pressthe EXITbutton to exit.
oThe current time will appear every time you press the INFO
button.
AbsentPower Off
When you set the timer "On", your television wiJJeventually be turned off, if you do not operate any
controls during the 3 hours after the TV is turned on by timer. This function is available in only the
timer "On" mode and will prevent a leakage accident or overheating, caused by your TV left on for
a long time due ta the timer "On" (when you are away on holiday, for example}.
SellingtheTimers
This TV can be set to turn on or off automaticaiiy at specific times that you
choose. Before using the timers, you must set the TV's clock, as described
previously.
theOn/OffTim÷r
Press the MENU button.
Press the A or T button to select "Setup",
then press the ENTERbutton.
Press the A or T button to select "Time",
then press the ENTERbutton.
Press the A or _' button to select "On
Timer", then press the ENTERbutton.
Press the A or T button to adjust "Hour",
then press the _ button to move to the
next step.
Set other items using the same method as
above.
When finished, press the MENU button to
return.
Press the A or T button to select "Off
] Timer", then press the ENTERbutton.
Press the A or T button to adjust "Hour",
then press the _ button to move to the
next step.
Set other items using the same method as
above.
Press the EXITbutton to exiL
38 39