San Telequip SC09FE User manual

San Telequip (P) Ltd.,
4 Crystal House, 235, Navi Peth
Off LBS Road, Pune 411 030, India
Phone : [phone] Connecting. Converting. Leading !
email : [e-mail] .
Document Name: User Manual for Fiber to Ethernet Media Converter SC09FE Internal Supply
Many thanks for purchasing Fast Ethernet optical converter.
Packing list
Please check the following items in the package before installing the converter.
Fast Ethernet optical converter 1no’s
User manual 1copy
Installation
Interface : Ethernet Interface
Use CAT5 twisted-pair with length of 100 meter. SC09FE features the function of Auto Negotiation &
MDI/MDI-X.
Interface : Fiber Interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets
of optical converter are interfaced or connected to switch with fiber interface, the fiber is in cross connection,
namely "TX-RX", "RX-TX".
Model no’s selection : SC09FE D/N - M/S-ST/SC-A/D XXX-A/I
Base Model : SC09FE D/N
M/S : Multimode / Single Mode
ST/SC : ST/SC Connector
A/D XXX : AC / DC. XXX : Specify Input voltage separately
A/I : AC External Adapter / Internal Supply
Connection
The network device (Hub or Switch) with RJ-45 interface is connected to RJ-45 port of SC09FE. And the
multi/single mode fiber is connected to SC/ST fiber interface. The LED’s are as below : (See the table below
for the LED indicator lamp)
Explanation for LED indicators
LED
indicator
Status
Explanation
FX L
On
“ON” indicates that Fibe
r link is in correct connection
Blink
“Blink” indicates
data through Fx end
TX L
On
“ON” indicates that
electric
al
link is in correct connection
Blink
“Bli
nk” indicates packet goes thr
ough Tx end
FDX
On
Converter works in
the
full duplex mode
Off
Converter works in
the
half duplex mode
PWR
On
Power on
FX
100
On
Transfer r
ate of
Fx is 100Mbps
TX
10/100
On
Transfer r
ate of
electric
al
interface is 100Mb
ps
Off
Transfer r
ate of
electric
interface is 10Mbps
Fiber features
M
odel
Optical wavelength
(nm)
Optical power
(dbm)
Sensibility
(dbm)
Saturability
(dbm)
MM
1310
-
6 ~
-
12
<
-
16
-
12
MM
1310
-
19
~
-
14
-
31
-
1
2
SM
25
1310
-
14
~
-
7
-
34
-
3
SM 40
1310
-
9
~
-
5
-
38
-
3
SM
60
1310
-
5
~
-
0
-
38
-
3

San Telequip (P) Ltd.,
4 Crystal House, 235, Navi Peth
Off LBS Road, Pune 411 030, India
Phone : [phone] Connecting. Converting. Leading !
email : [e-mail] .
Technical parameters
1. Supporting IEEE 802.3 10 Base-T standard, IEEE 802.3u 100 Base-TX/FX standard
2. Back pressure flow control for full duplex IEEE802.3 X and half duplex
3. Auto MDI/MDI-X
4. Connector : One UTP RJ-45 connector, one SC/ST connector
5. Operation mode : Full duplex mode or Half duplex mode
6. Power supply : Internal 230V AC or 24V DC
7. Power Supply connectors : 3 Pin screw type
8. Environmental temperature : 0to 60C
9. Relative humidity : 5%-90%
10. Dimension H×W×D : 77mm*34mm*133mm
11. Mounting : DIN Rail
12. TP cable : Cat5 UTP cable
13. Transfer fiber
a. Multi-mode: 50/125, 62.5/125 or 100/140µm
b. single mode:: 8.3/125, 8.7/125, 9/125 or 10/125µm
( Front Panel )
Caution
This product is suitable for indoor application
Put on the dust cover of fiber interface when not used
Do not stare at the Fiber end with naked eyes