SanDisk M230 - Sansa 512 MB Digital Player User manual



Contents
1. Quick Start 1
Features 1
What You Need to Begin 2
Installing the Battery 2
The Basic Controls 3
Play Music 5
Listen to the FM Radio 7
Voice recording 8
Headphone/Earphone 9
2. Playing Music 10
Connecting and Disconnecting 10
Using the Music Controls 10
Listening to Music 11
Transferring Music 12
Adjusting Settings 13
3. Listening to the FM Radio 16
Using the FM Radio Controls 16
Finding a Radio Station 17
Accessing FM Presets 18
Save a Radio Station as a Preset 18
Delete a Preset Radio Station 19
Setting Preset Stations Automatically 19
4. Voice recording 22
Using the Voice Recorder Controls 22
Record voice to file 23
Saving the recorded file 24
Listening to recorded files 24
Deleting to recording file 25
5. Navigating the Software Menus 25
The Basics 25
Diagrams of Top Level Sub Menus 27
6. Tips and Troubleshooting 34
7. Learn More, Service, and Warranty Information 35
Getting Technical Support 35
Learn More 35
Your 1-Year SanDisk Limited Warranty 36
8. Safety Tips and Cleaning Instructions 38

1
Quick Start `1
This chapter helps you get started quickly playing
music and listening to the FM radio with your
SanDisk Sansa™ m200 Series MP3 Player.
Quick Start
Congratulations on your purchase of a SanDisk Sansa m200 Series MP3 Player! This chapter
will help you to become familiar with your new purchase as quickly as possible.
Features
Your Sansa MP3 Player is a full-featured music device that can be carried with you anywhere.
Plays MP3, WMA, secure WMA and Audible audio file formats.
The backlit graphic LCD display supports numerous local languages around the world
and displays artist, album and song title information as well as other important song
information.
The digital FM radio allows you to access local radio stations around the world. The
radio also allows you to preset up to 20 of your favorite radio stations.
With 5 equalizer types for the FM radio and music player, you can optimize your sound
for your favorite style of music, for example, Rock, Jazz, Classical, Pop, and Custom
(user-defined).
Sophisticated music library sorting lets you browse the music in your player by artist,
album, song title, genre, year, playlist, and other useful criteria.
“AB” feature allows you to select a start point and an end point within an audio file so
you can play that segment over and over. This feature can be helpful for learning
languages.
Hi-Speed USB 2.0 port for fast and easy transfer of files.
Up to 19 hours of continuous playback using one AAA battery.
Supports voice recording function with built-in microphone.
Supports Microsoft WMDRM 9 and 10.
Fully compatible with subscription music services.

What You Need to Begin
To add music to the Sansa m200 series MP3 Player, the following are needed:
Intel Pentium PC or equivalent.
Windows XP (Windows Media Player 9 or 10).
CD-ROM drive
USB 2.0 port for High-Speed transfer.
Supports MP3, WMA, secure WMA and Audible audio file formats
Your Sansa Package contains:
Sansa m200 Series MP3 Player
Earphones
Armband and Case
AAA battery
USB 2.0 travel cable
CD with User Manual
Quick Start Guide
Installing the Battery
Follow the steps as shown in Figure 1:
1. Turn your player over, so the backside faces up, and locate the battery door at the
back of the player.
2. Gently depress the catch at the bottom of the battery cover and lift up.
3. Push the battery down into the battery area of the player, placing the flat end (--) of
the battery against the spring in the battery area. The protruding top (+) of the
battery slips down and under. The battery should fit snugly.
4. Replace the battery cover until it snaps closed.
Quick Start `2

Figure 1. Installing the AAA Battery
The Basic Controls
Your player has an easy to use set of controls as shown in Figure 2
Left Side Front Right Side
(with Hold, Mic) (Power/Menu, Volume)
Top (with Headphone Jack, USB)
Figure 2: The Basic Controls
The control names and their functions are described in Table 1 below.
Quick Start `3

Table 1: Control Names and Functions
Control Name Function(s)
Power/Menu Button Located on the right side of the player:
•Press and Hold to turn the player on or off.
•Press once to enter the menu
•Press to exit menu display during menu
navigation
•Press to cancel the change in setting menu
Select Button Located on the front of the player:
•Select a song or menu
•Press to view secondary information about a
song during playback, for example, song
format and playback data
Play/Pause/Up Button Located on the front of the player:
•Press button to Play/Pause during playback.
•Press button to move up one item during menu
browsing.
Repeat/AB/Down
Button
Located on the front of the player:
•Press once to toggle the repeat mode (repeat 1
song, repeat all selection, and no repeat)31
•Press and hold to enable A-B looping
Next/Fast Forward
Button
Located on the front of the player:
•Press to skip to next song during playback
•Press and hold to Fast forward during
playback
•Press to enter a submenu during menu
navigation
Previous/Fast Reverse
Button
Located on the front of the player:
•Press to skip to previous song during playback
•Press and hold to Fast Reverse during
playback
•Press to return to a upper level menu during
menu navigation
Hold Button Located on the left side of the player, slide down to
lock or hold and up to unlock the player.
Volume Button Located on the right side of the player:
•Increase or decrease volume during playback.
USB Port Located at the top of the player, connect a USB cable
from the player to your computer
Earphone Port Located at the top of the player, connect earphones to
listen to the player.
Quick Start `4

Control Name Function(s)
Mic Located on the left side of the player, speak into the
Mic during Recording.
For more information about the onscreen menus, see the Navigating the Software Menus in
the user guide on Page 25.
Play Music
To play music files, you need to transfer music to your player.
Transfer Music
The first step to playing music is to transfer files to your player. Follow these steps:
1. Use the USB connector cable provided with your player to connect the USB port on
your player to an open USB port on your computer. The player will appear as a
removable drive in Windows File Explorer. (Can’t find the USB port on your player?
See The Basic Controls section on page 3.)
2. Drag and drop music files to the player from any location on your hard-drive or use a
variety of music software to move music to your Sansa. For more information on how
to use specific software, please refer to the help files provided with each program.
NOTE: Because your Sansa Player automatically organizes your music by artist, album,
song title, genre, and year, you only need to copy your music to the player. Your Sansa
will automatically create a music library which you can later sort with easy-to-use menus.
Play Music Files
After you have transferred music files to your player, disconnect the USB cable from your
player and follow these steps:
1. Press the Power/Menu Button once. The SanDisk logo and Sansa logo will briefly
appear onscreen then disappear. (Can’t find the Power/Menu Button? See The
Basic Controls section on Page 3.)
WARNING: If the onscreen message says “Locked” and then shuts off, you
need to locate the Hold Button on the left side of your player. Slide that button
up to unlock your device. Then repeat Step 1 above. See The Basic Controls
section on Page 3 if you cannot find the Hold Button.
Quick Start `5

NOTE: If you do not see music files onscreen, briefly press the Power/Menu
Button on the right side of your player. The software Menu will appear. Use the
Repeat/AB/Down Button to scroll and highlight Modes. Press the Select Button to
select Modes. Press the Play/Pause/Up Button to scroll then highlight the Audio
Playback mode. Press the Select Button to enter music mode.
2. Press the Previous/Fast Reverse or Next/Fast Forward Buttons to move backwards
or forwards through your music files.
3. Press down once on the Play/Pause/Up Button to play the music files. Once your
selected music has played, your player will play each music file, one after another.
To pause the music, press the Play/Pause/Up Button, to resume press it again.
4. To change the volume of your music as it plays, push the volume button on the right
side of your player.
Once your music starts to play, you can use the player buttons to:
Skip backwards or forwards to the next song by pressing once on the Previous/Fast
Reverse Button (backwards) or Next/Fast Forward Button (forwards).
Want to switch to another song while your music plays? Press the Power/Menu Button
to display the software menu onscreen. Press the Repeat/AB/Down Button to scroll and
highlight your menu choices. Press the Select Button to select options. First, scroll to
the Play Music item and select it. Scroll to select from a list of ways to access music, for
example, by artist, and then select your choice. Repeat this scroll and select the band,
album and song. When your song is highlighted, press the Select Button to play it.
To learn more about how to play music with your player, see the Playing Music chapter that
begins on Page 10.
Quick Start `6

Listen to the FM Radio
Follow these steps:
1. Press the Power/Menu Button once. The SanDisk logo and Sansa logo will briefly
appear onscreen then disappear. (Can’t find the Power/Menu Button on your
player? See The Basic Controls section on page 3.)
WARNING: If the onscreen message says "Locked" and then shuts off, you
need to locate the Hold Button on the left side of your player. Slide that button
left to unlock your device. Then repeat Step 1 above. See The Basic Controls
section on page 3 if you cannot find the Hold Button.
NOTE: If you do not see the radio onscreen, briefly press the Power/Menu Button
on the right side of your player. The software Menu will appear. Use the
Repeat/AB/Down Button to scroll and highlight Modes. Press the Select Button to
select Modes. Press the Play/Pause/Up Button to scroll then highlight the FM
Radio mode. Press the Select Button to enter FM radio mode.
2. To change stations, press the Next/Fast Forward Button or Previous/Fast Reverse
Button to move along the radio spectrum. Press and hold either of these buttons to
scan radio stations.
NOTE: You can scan preset radio stations using the Play/Pause/Up Button or the
Repeat/AB/Down Button. See Accessing FM Presets on Page 18 to learn how to
access the Preset Channel software menus to add, modify, and delete preset
channels.
3. To change the volume of your music as it plays, press the Volume Button in the
right side of your player.
4. To stop playing the FM radio, you have two choices:
Press and hold down the Power/Menu Button until the “Powering Down”
message appears.
Press the Power/Menu Button briefly to navigate the software Menu to switch to
Music mode by selecting Play Music with the Select Button and using the
Next/Fast Forward Button and Previous/Fast Reverse Button to navigate to the
song you want to play. To learn how onscreen menus work, see the Navigating
the Software Menus chapter that begins on Page 25.
For more information about how to use the FM radio, see the Listening to the FM Radio
chapter that begins on Page 16.
Quick Start `7

Voice recording
To record your voice as file to your player. Follow these steps:
1. Press the Power/Menu Button once. The SanDisk logo and Sansa logo will briefly
appear onscreen then disappear. (Can’t find the Power/Menu Button on your
player? See The Basic Controls section on page 3.)
WARNING: If the onscreen message says "Locked" and then shuts off, you
need to locate the Hold Button on the left side of your player. Slide that button
left to unlock your device. Then repeat Step 1 above. See The Basic Controls
section on page 3 if you cannot find the Hold Button.
NOTE: If you do not see the Recorder onscreen, briefly press the Power/Menu
Button on the right side of your player. The software Menu will appear. Use the
Repeat/AB/Down Button to scroll and highlight Modes. Press the Select Button to
select Modes. Press the Play/Pause/Up Button to scroll then highlight the Recorder
mode. Press the Select Button to enter Recorder mode.
2. Press the Power/Menu Button briefly to access the software Menu then use the
Modes setting to switch to Recorder.
3. Press the Play/Pause/Up Button to start recording.
4. During the recording, If the Play/Pause/Down Button is pressed, the recording will
be paused. If the Play/Pause/Down Button is pressed again, the recording will
resume.
5. To stop recording:
Press the Repeat/AB/Down Button.
6. Saving your recording:
Once the recording has been stopped you’ll be presented with a message
asking you if you’d like to save the recording. Use the Next/Fast Forward and
Previous/Fast Reverse buttons to move the highlight between the X and check
boxes. To save the recording, press Select with the check box highlighted. To
return to the recorder without saving, press Select with the X box highlighted.
You can play back your saved recordings under the Play Music menu.
Quick Start `8

Headphones/Earphones
Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. It
may create a traffic hazard and may be illegal in some areas. It can also be dangerous to play
your music with headphones/earphones at high volume while walking, or engaged in other
activities. You should exercise extreme caution and discontinue use in potentially hazardous
situations.
Avoid using headphones/earphones at high volume. Hearing experts advise against
continuous loud and extended music play.
Quick Start `9

2
Playing Music `10
This chapter helps you get started playing music
on your SanDisk Sansa™ m200 Series MP3
Player.
Playing Music
Your player can play music files stored in MP3, WMA, secure WMA and Audible audio file
formats. This chapter shows you how to load and play your music files.
Connecting and Disconnecting
Your player includes a USB connection cable so that you can transfer music files from your
computer to your player. The small end fits into the USB port at the top of your player. The
larger flat end connects to the USB port on your computer.
To play music, first upload files from your computer to your player. Follow these steps:
1. Use the USB connector cable provided with your player to connect the USB port on
the top of your player to an open USB port on your computer. The player will
appear as a Sansa m200 series on your computer. (Can’t find the USB port on your
player? See The Basic Controls section on Page 3.)
2. Drag and drop music files to the player from any location on your hard-drive or use
a variety of music software to move licensed music to your Sansa. For more
information on how to use specific software, please refer to the help files provided
with each program.
NOTE: Because your Sansa Player automatically organizes your music by artist, album,
song title, genre, and year, you only need to copy your music to the player. Your Sansa
will automatically create a music library which you can later sort with easy-to-use menus.

Using the Music Controls
Your player has three modes of operation: Play Music, FM Radio, and Recorder. To play your
music files, you need to be in Play Music mode. Follow these steps:
3. Press the Power/Menu Button once. The SanDisk logo and Sansa logo will briefly
appear onscreen then disappear. (Can’t find the Power/Menu Button on your
player? See The Basic Controls section on page 3.)
WARNING: If the onscreen message says "Locked" and then shuts off, you
need to locate the Hold Button on the left side of your player. Slide that button
left to unlock your device. Then repeat Step 1 above. See The Basic Controls
section on page 3 if you cannot find the Hold Button.
4. If you do not see music files onscreen, briefly press the Power/Menu Button on the
right side of your player. The software Menu will appear. Use the Repeat/AB/Down
Button to scroll and highlight Modes. Press the Select Button to select Modes.
Press the Play/Pause/Up Button to scroll then highlight the Audio Playback mode.
Press the Select Button to enter music mode.
When you are in Music mode, the screen shown in Figure 3 will appear on your player.
Figure 3: The Music LCD screen
The control buttons and ports for your player are described in The Basic Controls section on
Page 3. More detailed descriptions on how the controls work is included in the step-by-step
instructions throughout this document. In addition, the Navigating the Software Menus
chapter on Page 25 describes the onscreen menus that appear when you use these controls.
Listening to Music
Once you are in Music mode, and you have uploaded music files (see Connecting and
Disconnecting section on Page 10), you can listen to music. Follow these steps:
1. A music file will display onscreen (see Figure 3). Press down once on the
Play/Pause/Up Button to play the file. (Can’t find the Play/Pause/Up Button on your
player? See The Basic Controls section on Page 3.)
Playing Music `11

2. Press the Previous/Fast Reverse or Next/Fast Forward Buttons to move backwards
or forwards through your music files.
3. Press down once on the Play/Pause/Up Button to play the music files. Once your
selected music has played, your player will play each music file, one after another.
To pause the music, briefly press the Play/Pause/Up Button.
4. To change the volume of your music as it plays, push the volume button on the right
side of your player. Press Volume-up button increases the volume and Volume-
down button decreases the volume.
Once your music starts to play, you can use the player buttons to:
Skip backwards or forwards to the next song by pressing once on the Previous/Fast
Reverse Button (backwards) or Next/Fast Forward Button (forwards).
Want to switch to another song while your music plays? Press the Power/Menu Button
to display the software menu onscreen. Press the Repeat/AB/Down Button to scroll and
highlight your menu choices. Press the Select Button to select options. First, scroll to
the Play Music item and select it. Scroll to select from a list of ways to access music, for
example, by artist, and then select your choice. Repeat this scroll and select process to
find a song. When your song is highlighted, press the Select Button to play it.
Transferring Music
To transfer music from your computer to your player:
1. Use the USB connector cable provided with your player to connect the USB port on
your player to an open USB port on your computer. The player will appear as a
Windows Portable Device on your computer. (Can’t find the USB port on your
player? See The Basic Controls section on page 3.)
2. Drag and drop music files to the player from any location on your hard-drive or use
a variety of music software to move licensed music to your Sansa. For more
information on how to use specific software, please refer to the help files provided
with each program.
NOTE: Because your Sansa Player automatically organizes your music by artist, album,
song title, genre, and year, you only need to copy your music to the player. Your Sansa
will automatically create a music library which you can later sort with easy-to-use menus.
Deleting Music Files On Your Sansa MP3 Player
When your player is connected to your computer with the USB connector, you can use your
computer file browser software to view all files on your player. Your player will appear as
Sansa m230 or m240. Follow these steps:
Playing Music `12

1. Use the USB connector cable provided with your player to connect the USB port on
the top of your player to an open USB port on your computer. The player will
appear as a Windows Portable Device on your computer. (Can’t find the USB port
on your player? See The Basic Controls section on Page 3.)
2. Delete your music files to the player with software tools like Rhapsody, Windows
Media Player or Napster Client.
3. To use the Windows Media Player, Rhapsody Client or Napster Client software to
delete files to your player please refer to the Windows Media Player, Rhapsody
Client or Napster Client help file.
NOTE: While you can store and organize your audio files on your player using folders
with names you select, your player will ignore folders and names. Instead, your Sansa
player will extract information from each audio file so that you can use the software
menu to navigate your files by artist, album title, song title, and other useful criteria.
Deleting Music Files from Your Player
Your SanDisk Sansa Player does not allow you to delete files from within the player. Instead
we recommend that you follow the steps outlined in Deleting Music Files On Your Sansa
MP3 Player on Page 12 above to remove files from your computer.
But the recorded files can be deleted at the player. Refer to Page 24 to deleting the recorded
file.
Customize Your Favorite Play list
You can select up to 30 songs to be your “Favorites” play list for easy access. By press-and-
hold the Select button while you are listening to your song files, the player will automatically
detect whether the current song is already in the Favorite list and guide you to add / remove
the song to the Favorite list.
Add a Song to the Favorite List
When you are listening to the song and you press and hold the Select button, if the song is in
not in the list, a confirmation message for adding the song to the list will be shown. To confirm,
press the Select button when the check box is highlighted. To cancel, press the |<< button to
highlight X button and the Select button.
Remove a Song From the Favorite List
When you are listening to the song and you press and hold the Select button, if the song is
already in the list, a confirmation message for removing the song from the list will be shown. To
Playing Music `13

confirm, press the Select button when the check box is highlighted. To cancel, press the |<<
button to highlight X button and the Select button.
Adjusting Settings
Your player allows you to define the equalizer and repeat settings for music.
Set Equalizer Playback
The sound settings on your Sansa can be optimized for different music styles using the
onboard five-band equalizer. Follow these steps:
1. Put your player in Play Music mode. See Using the Music Controls on Page 10 if
you need help with this step.
2. Briefly press the Power/Menu Button. The software Menu will appear onscreen.
See The Basic Controls section on Page 3 if you cannot find the Power/Menu
Button.
3. Press the Repeat/AB/Down Button to scroll to the Settings item. Press the Select
Button to select Settings.
4. Press the Repeat/AB/Down Button to scroll to the Equalizer item. Press the Select
Button to select Equalizer.
5. Press the Select Button to select the Equalizer. Your unit is preset to Custom.
Press Select to change the equalizer setting manually, or to save time press the
Repeat/AB/Down Button for preset equalizer levels. Press the Play/Pause/Up
Button to scroll through the Pop, Classical, Jazz and Rock equalizer settings. If you
are playing a song when you change settings, your music will change to the
equalizer setting that is highlighted. Press the Select Button to select the equalizer
setting you want.
6. The Custom equalizer configuration screen will appear as a set of five vertical
rectangles that represent five equalizer bands you can define. Press the Next/Fast
Forward Button to move from rectangle to rectangle, from left to right. Press down
the Play/Pause/Up Button or Repeat/AB/Down Button to increase or decrease the
setting for each equalizer band.
7. When you have set the equalizer bands, press the Select Button twice to save and
exit back into the menu.
8. All music played will use these settings until you change to another equalizer
setting.
Playing Music `14

Set Repeat Playback Mode
Your player allows you to repeat all or part of a music or audio file. Follow these steps:
1. Briefly press the Power/Menu Button. The software Menu will appear onscreen.
See The Basic Controls section on Page 3 if you cannot find the Power/Menu
Button.
2. Press the Repeat/AB/Down Button to scroll to the Settings item. Press the Select
Button to select Settings.
3. Press the Repeat/AB/Down Button to scroll to the Playback item. Press the Select
Button to select Playback. The Playback list will appear.
4. Press the Repeat/AB/Down Button to scroll to the Repeat item. Press the Select
Button to toggle Repeat through its three settings: repeat OFF, repeat (one
selection), and repeat (all selections).
5. Press the Select Button to save your Repeat settings. Press the Power/Menu
button to return to the Menu screen.
Set Shuffle Playback Mode
Your player allows you to play your audio files randomly. Follow these steps:
1. Briefly press the Power/Menu Button. The software Menu will appear onscreen.
See The Basic Controls section on Page 3 if you cannot find the Power/Menu
Button.
2. Press the Repeat/AB/Down Button to scroll to the Settings item. Press the Select
Button to select Settings.
3. Press the Repeat/AB/Down Button to scroll to the Playback item. Press the Select
Button to select Playback. The Playback list will appear.
4. Press the Repeat/AB/Down Button to scroll to the Shuffle item. Press the Select
Button to toggle Shuffle off and on. The words ON or OFF will appear to the left of
the word Shuffle.
5. Press the Select Button to save your Shuffle setting. Press the Power/Menu button
to return to the Music mode screen.
Playing Music `15

3
Listening to the FM Radio `16
This chapter helps you get started listening to the
FM radio with your SanDisk Sansa™ m200 Series
MP3 Player.
Listening to the FM Radio
Your player has an FM radio that can play stations in most parts of the world. This chapter
helps you to become familiar with its FM Radio features.
Using the FM Radio Controls
Your player has three modes of operation: Play Music, FM Radio and Recorder. To listen to
the radio, you need to be in FM Radio mode. Follow these steps:
1. Press the Power/Menu Button once. The SanDisk logo and Sansa logo will briefly
appear onscreen then disappear. (Can’t find the Power/Menu Button on your
player? See The Basic Controls section on page 3.)
WARNING: If the onscreen message says "Locked" and then shuts off, you
need to locate the Hold Button on the left side of your player. Slide that button
left to unlock your device. Then repeat Step 1 above. See The Basic Controls
section on page 3 if you cannot find the Hold Button.
2. If you do not see the radio onscreen, briefly press the Power/Menu Button on the
right side of your player. The software Menu will appear. Use the Repeat/AB/Down
Button to scroll through Modes. Highlight the FM Radio mode. Press the Select
Button to enter FM Radio mode.
When you are in FM Radio mode, the screen shown in Figure 4 will appear on your player.

Figure 4: The FM Radio LCD screen
The control buttons and ports for your player are described in The Basic Controls section on
Page 3. More detailed descriptions on how the controls work is included in the step-by-step
instructions throughout this document. In addition, the Navigating the Software Menus
chapter on Page 25 describes the onscreen menus that appear when you use these controls.
Finding a Radio Station
Once the FM Radio screen appears, you can listen to your FM radio and change settings.
Follow these steps:
1. Put your player in FM Radio mode. See Using the FM Radio Controls on Page 16
if you need help with this step.
2. To change stations, press the Next/Fast Forward Button or Previous/Fast Reverse
Button to move along the radio spectrum. Press and hold either of these buttons to
scan radio stations.
NOTE: You can scan preset stations using the Play/Pause/Up Button or the
Repeat/AB/Down Button. See Accessing FM Preset on Page 18 to learn how to access
the Preset Channel software menus to set preset and delete preset channels.
3. To change the volume of your music as it plays, push the volume button on the right
side of your player.
4. To stop playing the FM radio, you have two choices:
Press and hold down the Power/Menu Button until the “Powering Down”
message appears.
Press the Power/Menu Button briefly to navigate the software Menu to switch to
Music mode or Recorder mode. To learn how onscreen menus work, see the
Navigating the Software Menus chapter that begins on Page 25.
Listening to the FM Radio `17

Accessing FM Presets
The FM radio in your player can store up to 20 preset stations. These presets let you easily
access your favorite radio stations.
Follow these steps to access the Preset Channel software menus to set and delete preset
channels:
1. Put your player in FM Radio mode. See Using the FM Radio Controls on Page 16
if you need help with this step.
2. To change between Normal and Preset modes, press the Power/Menu Button once
to access the software menu.
3. Press the Repeat/AB/Down Button to scroll and highlight Settings. Press the Select
Button to select the Settings item.
4. Press the Repeat/AB/Down Button to scroll and highlight FM Settings. Press the
Select Button to select the FM Settings item. The FM Settings menu will appear.
5. Press the Repeat/AB/Down Button to scroll and highlight FM Preset. Press the
Select Button to select the FM Preset item. The FM Preset menu will appear. Press
the Select Button.
Save a Radio Station as a Preset
To save a favorite radio station as a preset station, follow these steps:
1. Put your player in FM Radio mode. See Using the FM Radio Controls on Page 16
if you need help with this step.
2. Press the Power/Menu Button once to access the software menu. Press the
Repeat/AB/Down Button to scroll and highlight Settings. Press the Select Button to
select the Settings item.
3. Press the Repeat/AB/Down Button to scroll and highlight FM Settings. Press the
Select Button to select the FM Settings item. The FM Settings menu will appear.
4. Press the Repeat/AB/Down Button to scroll and highlight FM Preset. Press the
Select Button to select the FM Preset item. The FM Preset menu will appear.
5. Press the Repeat/AB/Down Button to highlight Set Preset. Press the Select Button
to select the Set Preset item. The Preset Channel List will appear.
6. Press the Repeat/AB/Down Button to scroll and highlight the Preset channel where
you would like to save one of your favorite stations. Once the preset channel is
highlighted, press the Select Button.
Listening to the FM Radio `18

7. Press the Play/Pause/Up Button or Repeat/AB/Down Button to find the station you
want to save as a preset channel. Press the Select Button twice to store the
selected station as a preset channel. The Preset Channel List will reappear with
your saved radio station assigned to the selected preset channel.
8. After you save a preset channel, you have two choices:
Repeat steps 6 and 7 above to add more preset channels.
Press the Power/Menu Button to exit the Set Preset mode and return to the FM
radio screen.
Delete a Preset Radio Station
Your player allows you to delete radio station frequencies that you have saved as presets.
Follow these steps:
1. Put your player in FM Radio mode. See Using the FM Radio Controls on Page 16 if
you need help with this step.
2. Press the Power/Menu Button once to access the software menu. Press the
Repeat/AB/Down Button to scroll and highlight Settings. Press the Select Button to
select the Settings item. The Settings menu will appear.
3. Press the Repeat/AB/Down Button to scroll and highlight FM Settings. Press the
Select Button to select the FM Settings item. The FM Settings menu will appear.
4. Press the Repeat/AB/Down Button to scroll and highlight FM Preset. Press the
Select Button to select the FM Preset item. The FM Preset menu will appear.
5. Press the Repeat/AB/Down Button to highlight Delete Preset. Press the Select
Button to select the Delete Preset item. The Preset Channel List will appear
onscreen.
6. Press the Repeat/AB/Down Button to highlight the station to be deleted. Press the
Select Button to delete the station. The station will disappear from the Preset
Channel list.
7. After you delete a preset channel, you have two choices:
Repeat step 6 above to delete more preset channels.
Press the Power/Menu Button to exit the Delete mode and return to the FM
radio screen.
Listening to the FM Radio `19