SanDisk Connect User manual

QUICK START GUIDE
SanDisk Connect™
Wireless Flash Drive

GET STARTED
1. Charge your Wireless Drive
Plug the Drive into a computer or USB-AC adaptor. A full charge can take up to 2 hours.
2) Turn on the Wireless Drive
Press the Wi-Fi power button until both LEDs flash 3 times.
3) Download the Wireless Flash Drive app
Download the free Wireless Flash Drive app from your mobile device application store.

4) Connect wirelessly to the Wireless Drive
(iOS app users only; if you’re an Android™ app user, skip this step.)
Go to Wi-Fi Settings on your mobile devices and select the Wireless Drive network from
the list of available Wi-Fi networks.
Note: No Internet connection or router is required.
Launch the Wireless Flash Drive app and start using your drive!
Note: For privacy, you can set a Wireless Flash Drive Wi-Fi password in Settings >
Password.

WAYS TO LOAD CONTENT
CONNECT VIA WEB BROWSER
You can also access content on the Wireless Drive without downloading the Wireless
Flash Drive app.
1. Connect to the Wireless Drive Wi-Fi network.
2. Launch an Internet browser and go to www.sandisk.com/WFD/ to access the Wireless
Drive content.

CONNECT TO THE INTERNET
Your mobile device or computer can wirelessly access content on your Drive and at the
same time remain connected to the Internet as long as a wireless Internet network is
available. (Some wireless networks might block this functionality.)
1. Connect to your Wireless Drive and open the app.
2. Go to Settings > Internet Connection Mode and turn on Enable Internet Connection.
3. Select the desired network from the list of available networks.
4. Exit the app and change your mobile device Wi-Fi connection to the same network
selected in the app. You’re now connected to both the Wireless Drive and the Internet.
From now on, when you connect to this Internet network, it will automatically find the
Drive.
Note: Creating a Wi-Fi password allows you to limit access to your Drive when
connecting directly to it. But the Wi-Fi password does not limit access when your Drive is
connected to an Internet Wi-Fi network, where anyone who has installed the Wireless
Flash Drive app or knows the Wireless Drive URL can access your Drive.
HAVING TROUBLE?
THIS MIGHT HELP
• Download the latest Firmware from www.sandisk.com/support
• Make sure you’re wirelessly connected to the Wireless Drive.
• Make sure the Wireless Drive is fully charged.
• Force the app to close:
Wireless Flash Drive app for Android: Go to Settings > Applications > Manage
applications.
Wireless Flash Drive app for iOS: Double-press the Home button on your device, press
and hold down the app icon until the Close symbol appears, and close the app.
• If you’ve forgotten your security password, press the power button for 30 seconds
(until all the lights flash) to clear the password so you can set a new one.

NEED MORE HELP?
Support: www.sandisk.com/support
Watch the Wireless Flash Drive tutorial videos for more information. You can find them on
the Wireless Flash Drive and the Support website.
FAQs and Forums can also be found on the Support website.
WIRELESS FLASH DRIVE INFO
Wireless Flash Drive User Manual: Go to www.sandisk.com/support > Connected
Memory > Downloads and click Wireless Flash Drive User Manual.
Safety and Handling: See “Safety and Care” in the Wireless Flash Drive User Manual.
Battery: This product contains a Lithium-ion battery. The battery should be replaced
only by SanDisk and its authorized service providers. SanDisk and its authorized service
providers will ensure the spent battery is recycled properly, since batteries should always
be recycled or disposed separately from household waste.
SanDisk One-Year Limited Warranty Summary: The SanDisk Connect Wireless Flash
Drive is covered by a one (1) year limited warranty, subject to the applicable warranty
terms and conditions, as defined at www.sandisk.com/wug.
Regulatory: Regulatory information, certification, and compliance marks are available on
the device. For additional regulatory information, see the Wireless Flash Drive User
Manual.
FCC Compliance Statement: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and then on, the user
is encouraged to try to connect the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to a different outlet so that the equipment and receiver are on
different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications to this product not authorized by SanDisk could
void the electromagnetic compatibility (EMC) and wireless compliance and negate your
authority to operate the product. This product has demonstrated EMC compliance under
conditions that include the use of compliant peripheral devices and shielded cables
between system components. It is important that you use compliant peripheral devices
and shielded cables between system components to reduce the possibility of causing
interference to radios, televisions, and other electronic devices.
EU Disposal Information
Disposal & Recycling - Applicable in the European Union and other countries with
separate collection systems. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate the SanDisk Connect® Wireless
Flash Drive from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial waste for disposal.

Recycling SanDisk Connect® Wireless Flash Drive
Do not dispose of either the SanDisk Connect® Wireless Flash Drive with your household
waste. In some countries or regions, collection systems are set up to handle electrical and
electronic waste items. Contact your regional authorities for more details. If collection
systems are not available, please return unwanted accessories to any SanDisk Approved
Service Center in your region.
EU Declaration of Conformity
Hereby, SanDisk declares that this SanDisk Connect® Wireless Flash Drive is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC
EN 300 328 v1.7.1 (2006-10)
EN 301 489-17 v1.3.2 (2008-04)
EN 62311: 2008
©2013 SanDisk Corporation. All rights reserved.
SanDisk is a trademark of SanDisk Corporation, registered in the United States and other
countries. Android is a trademark of Google Inc. Wi-Fi is a registered trademark of the Wi-
Fi Alliance. All other trademarks are the property of their respective owners.