S&S Precision CR-M CRM-0001 Series User manual

CR-M™- Chest Rig-Modular
END USER INSTRUCTIONS - READ BEFORE USE
PRODUCT NAME:
PART NUMBER:
CRM-0001XX
©2022 S&S Precision, LLC | 03072022
FOR ADDITIONAL CR-M™ ADD ONS CONTACT: [email protected]
PAGE 1 OF 2
Front and back shown above. Ships equipped with Comfort
Foam and is easily removed from Velcro if needed.
Snap shoulder buckles. Snap torso buckles.
Open shoulder pads to remove
for Low Profile configuration.
The CR-M™ can easily be adapted
to carry armor plates via S&S
Precision’s Armor Harness.
Available at sandsprecision.com
OPEN CAMERA TO
VIEW USER INSTRUCTIONS OR VISIT
WWW.SSPGEAR.COM/
END-USER-INSTRUCTIONS
FRONT BACK
COMFORT FOAM COMFORT FOAM OPTIONAL
BACK PANELABDOMINAL PANEL
2
1
3

END USER INSTRUCTIONS - READ BEFORE USE
PRODUCT NAME:
PART NUMBER:
©2022 S&S Precision, LLC | 03072022
FOR ADDITIONAL CR-M™ ADD ONS CONTACT: [email protected]
PAGE 2 OF 2
CRM-0001XX
CR-M™- Admin Panel
ATTACH OPTIONAL ADMIN PANEL
Replace the comfort
foam to both panels.
Clip the back harness
from the CR-M to the
front panels.
CR-M with the Admin
and Abdominal Panels
Line up the Admin Panel
to the Abdominal Panel
openings shown above.
Pop the Tegris “fangs”
into the top of the
Abdominal Panel, and
drive the Admin Panel
down to connect.
CR-M with the
Abdominal Panel only.
CR-M Abdominal Panel
with the female split
buckles attached.
Remove comfort foam.
Remove the top female
split buckles and re-
attach to the Admin
Panel.
4 5
6 7
1 2 3