S&S Precision HE-0002 Series User manual

PAGE 1 OF 2
END USER INSTRUCTIONS - READ BEFORE USE
PRODUCT NAME:
PART NUMBER:
©2022 S&S Precision, LLC | 05122022FOR COMPATIBLE ADD ONS CONTACT: [email protected]
1.25”
Qty 3
1”
Qty 3
.75”
Qty 3
.5”
Qty 3
.3125”
Qty 3
.1875”
Qty 3
Holster Extender™
HE-0002XX
A. Holster Extender
B. Spacer (x2)
C. GRT™ Reinforced Belt Adapter
D. Screw Kit (x18)
PACKAGE INCLUDES:
WITH GRT™ REINFORCED BELT ADAPTER
COMPATIBLE WITH THESE HOLSTERS
3 SET DROP POSITIONS (Shown on Safariland® holster)
A.
D.
B. C.
Safariland® G-Code Blackhawk!®
0” drop
1 ½” drop
3” drop

PAGE 2 OF 2
END USER INSTRUCTIONS - READ BEFORE USE
PRODUCT NAME:
PART NUMBER:
©2022 S&S Precision, LLC | 05122022FOR COMPATIBLE ADD ONS CONTACT: [email protected]
Align the Holster
Extender with the hole
pattern of your holster.
Remove existing screws.
Spacers have been
provided to clear any
mechanism interferences.
Slide Holster Extender
up to align openings for
screws.
Attach the Holster
Extender to the holster
using the provided
screw kit.
Test for functionality by
pressing the button on
the Holster Extender and
sliding the up and down.
Equip holster by sliding
the provided GRT™
Reinforced Belt Adapter
(or Webbing Adapter).
onto the assembled
Holster Extender.
Push button on side of
extender to set drop
position.
1 2 3 4 5
HE-0002XX
ASSEMBLY (Shown on Safariland® holster)
Holster Extender™
WITH GRT™ REINFORCED BELT ADAPTER
ONE SPACER
WIDTH
TWO SPACER
WIDTH