Sangamo Rstat8 User manual

RSTAT8 & 9
Programmable Thermostat
Quick Reference Guide
INSTRUCTIONS: For more detailed information and instructions please refer to
the product User Guide.
_+
HOLD CLOCK LIGHT
TEST COPY PROG
SET RESET
Set Time & Date
1. Press CLOCK to enter edit mode
2. Press or to adjust the Year
3. Press CLOCK to cycle to next option (Month)
4. Repeat steps 2 & 3 to set Month, Day, Hours &
Minutes
5. Press SET to save & exit
Review Program
(view which programs are set over 7 days)
1. Press PROG to enter review mode
2. Pressing PROG again cycles through todays
programs (P1-P6 on right of display)
3. Press or to change day (1-7 at top of display)
4. Press SET to exit

_+
HOLD CLOCK LIGHT
TEST COPY PROG
SET RESET
Adjust Program
(change programmed times)
1. Hold SET & press PROG to enter edit mode
2. Use or to select day (1-7 at top of display)
3. Press PROG to nd setting (cycles P1 time, P1
temperature, P2 time, P2 temperature, ...)
4. Press or to adjust chosen setting
5. Press PROG to nd next setting you want to
change and repeat step 4
6. Press SET to save & exit
Copy Program
(copy one whole days settings to other days)
1. Hold COPY for 3 seconds (until display shows
‘COPY’)
2. Use or to select day to copy (1-7 at top of
display, number will ash until a day is copied)
3. Press COPY to copy that days settings
4. Use or to select day you wish to copy to
5. Press COPY to conrm
6. Repeat steps 4 & 5 to copy to subsequent days
7. Press SET to save & exit

_+
HOLD CLOCK LIGHT
TEST COPY PROG
SET RESET
Permanent Hold
(temperature is held indenitely until user cancels)
1. Press HOLD (key icon is displayed)
2. Use or to select temperature to hold at
3. Press PROG to conrm
4. Press SET to save & exit (to cancel press SET
again, key icon disappears)
Hold Days
(temperature is held for a number of days before
returning to the set programs)
1. Press HOLD for 3 seconds (d:01 and suitcase icon
are displayed)
2. Use or to set number of days
3. Press PROG then SET to conrm
4. Use or to set temperature
5. To cancel hold press SET (suitcase disappears)

_+
HOLD CLOCK LIGHT
TEST COPY PROG
SET RESET
Hold Hours
(temperature is held for a number of hours before
returning to the programs)
1. Press or to set the temperature
2. Press CLOCK (suitcase is displayed)
3. Use or to set number of hours (between 1-9)
4. Press PROG to conrm
5. Press SET to exit (display changes between time
and XH:00 to countdown time until programs
resume)
6. To cancel hold press SET (suitcase disappears)
Hold Until Next Program
(make a temporary change to the temperature)
1. Press or to set temperature (hand icon is
displayed)
2. press PROG then SET to conrm
3. Press SET to exit (to cancel hold press SET)
If you have a problem or require
any further information please
contact our technical team on:
01475 745131
Sangamo Limited
Industrial Estate, Port Glasgow,
Renfrewshire, PA14 5XG
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.sangamo.co.uk
143781 Issue A