Sanus DMF215 User manual

Our US-based
install experts
are standing
by to help.
Call us at:
888-333-9952
Get it right the
first time.
HeightFinder™
shows you
where to drill.
Check it out at:
SANUS.com/1174
Want to watch
a video that
shows how
easy this DIY
project will be?
Watch it now at:
SANUS.com/2888
Recommended placement
WE’RE HERE TO HELP
DMF215
INSTRUCTION MANUAL
Para Español ver página 20
DMF215

2
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!
No — Perfect!
Yes — This mount is NOT compatible. Visit MountFinder.sanus.com or call
1-888-333-9952 to find a compatible mount.
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
50 lbs.
(22.6 kg)
Ready to begin?
Does your TV
(including accessories)
weigh more than
50 lbs. (22.6 kg)?
Drywall with
wood studs?
Solid concrete or
concrete block?
Perfect!
Wood Stud Install
Concrete Install
Awl
Pencil Level Stud Finder Screwdriver
Tape
Measure
7/32 in.
(5.5 mm)
Wood
Drill Bit
Electric
Drill Hammer
1/2 in.
(13 mm)
Socket
Wrench Drill Bit
3/8 in.
(10 mm)
Concrete
Unsure?
Call Customer Service: 1-888-333-9952
Concrete kit CMK1 (not included)
CAUTION:
DO NOT
install into
drywall alone
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at 1-888-333-9952.
CAUTION: Avoid potential personal injury or property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●This product is designed for INDOOR USE ONLY
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

3
Dimensions
7.87in
200mm
3.94in
100mm
15.75in
400mm
11.81in
300mm
.34in
8.7mm
4.02in
102mm
.99in
25.2mm
45deg 45deg
5deg
15deg
15.0in
381mm
9.06in
230mm
8.27in
210mm
2.91in
74mm
.33in
8.4mm
3.1in
78mm
2.8in
71mm
WITHOUT EXTENSION
BRACKETS
17.07in
433.7mm
17.07in
433.7mm
6deg
TV INTERFACE
WALL PLATE
ROLL CONTROL
TOP VIEW - EXTENDED
TOP VIEW - RETRACTED
SIDE VIEW - EXTENDED
SIDE VIEW - RETRACTED
3-D
Before getting started, let’s make sure this mount is perfect for you!

4
M4 x 12mm
M6 x 12mm M6 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 20mm
M8 x 12mm M8 x 40mm
2.5mm
M4 M6/M8
22mm
5mm M8 x 30mm M8 x 50mm
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
STEP 1 Parts and Hardware
01
Faceplate
TV Screws
Washers Spacers
TV Bracket
Extender
TV Bracket
Screw
09 x4 10 x4
13 x4 12 x4 11 x4
14 x4 15 x4
17 x4 16 x4
04 x4 05 x4 06 x4 08 x4
03 x8
x1
02 x4
07 x4

5
5/16 x 2¾ in.
.
t
M5 x 6mm
5/16 x 2¾ in.
Fischer UX10 x 60R Anchor
STEP 2B: Concrete Installation Kit CMK1 [NOT INCLUDED]
STEP 2 Parts and Hardware
STEP 3 Parts and Hardware
Nut Cap
18 x1 19 x1
Full Motion Arm
Wall Plate
Template
Lag Bolt
Lag Bolt
Concrete Anchor
C1
x2
C2
x2
20 x2
22 x1 21 x1 23 x1
Washer
Contact Customer Service at 1-888-333-9952 to have these
additional pieces shipped directly to you.
Locking Screw

6
cm
inches
cm
inches
inch dimensions are approximate
inches cm mm
3 7.5 75
4 10 100
7 ⅞ 20 200
11 ¾ 30 300
15 ¾ 40 400
W
H
STEP 1 Attach Faceplate to TV
1.1 Measure Your TV Hole Pattern 1.2 Assemble Your Faceplate
Measure the width and height of your TV
hole pattern in mm.
Record your measurements:
Width_______mm x Height_______mm
Based on your TV hole pattern measurements
(Wmm x Hmm), determine your Faceplate
configuration: A, B, C, D or E.
A
200
[7 ⅞ in.]
200
[7 ⅞ in.]
400
[15¾ in.]
400
[15¾ in.]
B
These smaller hole patterns only use
Faceplate 01 . Do not use the four TV
brackets 02 and eight screws 03 .
02
100
[4 in.]
100
[4 in.]
03
Assemble TV brackets 02 onto Faceplate
01 and secure using eight screws 03 in
the corner holes indicated.
02
01
01
03
300
[11 ¾ in.]
300
[11 ¾ in.]
02
100 x 100
200 x 100
200 x 200
For TV Hole Pattern
Measurements
(Dimensions in mm)
300 x 300
400 x 400
For TV Hole Pattern
Measurements
(Dimensions in mm)

7
03
D E
03
200
[7 ⅞ in.]
200
[7 ⅞ in.]
01
Assemble TV brackets 02 onto Faceplate
01 and secure using eight screws 03 in
the corner holes indicated.
Assemble TV brackets 02 onto Faceplate
01 and secure using eight screws 03 in
the corner holes indicated.
01
02
02
02
02
C
03
Assemble TV brackets 02 onto Faceplate
01 and secure using eight screws 03 in
the corner holes indicated.
02
02
01
400
[15¾ in.]
400
[15 ¾ in.]
400
[15¾ in.]
300
[11 ¾ in.]
300
[11 ¾ in.]
300
[11 ¾ in.]
400 x 300
For TV Hole Pattern
Measurements
(Dimensions in mm)
300 x 200
400 x 200
For TV Hole Pattern
Measurements
(Dimensions in mm) 200 x 300
200 x 400
For TV Hole Pattern
Measurements
(Dimensions in mm)

or required.
8
Too Long
Too Short
Correct
1.3 Select TV Screw Diameter 1.4 Select TV Screw Length
Standard configurations
are shown. For special
applications, or ifyou
are uncertain aboutyour
hardware selection, contact
Customer Service.
CAUTION:
Verify adequate thread
engagementwith yourscrew/
washer/spacercombination
AND TV bracket.
–Too short will not holdthe TV.
–Too long will damage the TV.
M4
M6
M8
ab
a:For flat-back TVs,
no spacers 06 07
,
08
b:Spacers 06 and,
07 08 supplied for:
●Round (irregular) back TVs
●Extra space needed (forcables
or inset mounting holes)
FLAT BACK ROUND BACK CABLES INSET HOLES
Test the four TV screw diameters (M4,
M6, and M8) in the threaded inserts on
the back of your TV to determine which
screw diameter fits your TV.
08
0706

06 07 08
9
1.5 Attach TV Bracket
TV Bracket Configuration B
Illustrated (with spacers) 04 05
04 05
a: Flat Back
b: Round Back / Extra Space
TV Bracket Configuration A
Illustrated (with spacers)
Positionyour TV bracket configuration (A, B, C, Dor E) onto your TV, making sure the bracketis both centered and level overyour TV hole pattern.
NOTE: The hanging tab Hon faceplate 01 must be oriented toward the top of the TV.
Secure the TV bracket using your selection: (a) screw/washer or (b) screw/washer/spacer.
CAUTION:Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough to
secure the TVbracket to the TV. DO NOT overtighten thescrews.
H
01
17
17
09
09
01
01
02

10
center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
1. Locate your stud. Verify and mark the
2. Position the template 18at your desiredheight and line up the holes with your stud center line. Level the template and tape in place.
≤ 5/8 in.
(16 mm)
STEP 2A Attach Wall Plate to Wall Wood Stud Installation
CAUTION: Avoid potential personal injury or property damage!
●Drywall covering the wall must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½x 3 ½in. (38 x 89 mm)
21
18

11
.
WELCOME! THANKS FOR
CHOOSING SANUS VUEPOINT.
THIS IS GOING TO BE EASY!
LET’S GET STARTED.
STEP 1
Attach TV brackets to back of TV.
STEP 2
Attach wall plate to wall using
provided hardware.
STEP 3
Hang TV on arm.
Our live, US-based install
experts are standing by to help.
Call us at:
Or,chat at:
Get itright the rst time!
HeightFinder
™
shows you
where to drill.
Use it now at:
Want to watch a video that
shows how easy this is?
Watch it now at:
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove template 18
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm).
4. Installfullmotion arm 19 using two lag bolts 20 . Tightenthelag bolts only until they are pulled firmly against the wall plate.
CAUTION: Improper use could reduce the holding power ofthe lag bolt. DO NOT over-tighten thelag bolts.
7/32 in.
(5.5 mm)
2¾in. (70 mm)
43 20
20
1819

12
1. Position the template 18on the wall at your desired height. Level the template and mark the hole locations.
2. Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
.
.
18
21
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service
at 1-888-333-9952 to have the additional
hardware shipped directly to you.
STEP 2B Attach Wall Plate to Wall
Solid Concrete /Concrete Block Installation
3/8 in.
(10 mm)
3 in. (75 mm)
CAUTION: Avoid potential personal injury or property damage!
●Mount wall plate assembly 19directly onto concrete surface (no wall covering)
●Minimum solid concrete thickness: 8 in. (203 mm)
●Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
18

13
WELCOME! THANKS FOR
CHOOSING SANUS VUEPOINT.
THIS IS GOING TO BE EASY!
LET’S GET STARTED.
STEP 1
Attach TV brackets to back of TV.
STEP 2
Attach wall plate to wall using
provided hardware.
STEP 3
Hang TV on arm.
Our live, US-based install
experts are standing by to help.
Call us at:
Or,chat at:
Get it right the rst time!
HeightFinder
™
shows you
where to drill.
Use it now at:
Want to watch a video that
shows how easy this is?
Watch it now at:
WELCOME! THANKS FOR
CHOOSING SANUS VUEPOINT.
THIS IS GOING TO BE EASY!
LET’S GET STARTED.
STEP 1
Attach TV brackets to back of TV.
STEP 2
Attach wall plate to wall using
provided hardware.
STEP 3
Hang TV on arm.
Our live, US-based install
experts are standing by to help.
Call us at:
Or,chat at:
Get it right the rst time!
HeightFinder
™
shows you
where to drill.
Use it now at:
Want to watch a video that
shows how easy this is?
Watch it now at:
WELCOME! THANKS FOR
CHOOSING SA NUS VUEPOINT.
THIS IS GOING TO BE EASY!
LET’S GET STARTED.
STEP 1
Attach TV brackets to back of TV.
STEP 2
Attach wall plate to wall using
provided hardware.
STEP 3
Hang TV on arm.
Our live, US-based install
experts are standing by to help.
Call us at:
Or,chat at:
Get it right the rst time!
HeightFinder
™
shows you
where to drill.
Use it now at:
Want to watch a video that
shows how easy this is?
Watch it now at:
WELCOME! THANKS FOR
CHOOSING SA NUS VUEPOINT.
THIS IS GOING TO BE EASY!
LET’S GET STARTED.
STEP 1
Attach TV brackets to back of TV.
STEP 2
Attach wall plate to wall using
provided hardware.
STEP 3
Hang TV on arm.
Our live, US-based install
experts are standing by to help.
Call us at:
Or,chat at:
Get it right the rst time!
HeightFinder
™
shows you
where to drill.
Use it now at:
Want to watch a video that
shows how easy this is?
Watch it now at:
43
3. Remove the template 18and insert two anchors C2 (Fischer UX 10 x 60R - included in the Concrete Installation Kit CMK1*).
CAUTION: Be sure the anchors C2 are seated flush with the concrete surface.
4. Install full motion arm 19using two lag bolts C1 . Tighten the lag bolts only until they are pulled firmly against the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts C1 .
*Contact Customer Service at 1-888-333-9952 to have the Concrete Installation Kit CMK1 shipped directly to you.
C2
C1
19

14
HEAVY! You may need assistance with this step.
STEP 3 Hang TV onto Wall Plate
1. Install the nut cap 21on wall plate assembly 19 .
2. Fold first section of the arm of full motion arm 19against the wall to provide stability.
1 2
19
19
21

15
3 4
3. Hang the TV onto the arm of full motion arm 19by first hooking the hanging tab H , then resting the TV into place.
4. Lock the TV to the full motion arm 19with locking screw 22and washer 23.
IMPORTANT: This locking screw 22must be installed to secure the TV onto the full motion arm 19 .
01
19
H
19
22
23
19
19
01

16
Manage Cables
Fully extend the arms before routing cables.
Route the cables through the channels on the top and bottom of the arm 19for a cleaner look.
19

17
L
o
o
s
e
n
T
i
g
h
t
e
n
TV Adjustments
TILT ADJUSTMENT
Your TV should adjust easily when moved, then stay in place.
If your TV is too loose or too tight, adjust the tilt tension knob by hand.
NOTE: Once your TV is in place, tighten the tilt tension knob to
prevent unwanted movement.
LEVEL ADJUSTMENT
To adjust the leveling of your TV, loosen the locking screw 22 , level
your TV, then tighten locking screw 22 .
IMPORTANT: This locking screw 22must be installed to secure
the TV onto the full motion arm 19 .
Tilt Tension Knob
22
19

18
19
HEAVY! You may need
assistance with this step.
1 2 3
REMOVING THE TV
1. Disconnect the cables from your TV.
2. Remove locking screw 22.
3. Carefully lift your TV up and off of wall plate assembly 19 .
22

19
ESPAÑOL
INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO.
Antes de comenzar, verifiquemos que este soporte sea el ideal para sus necesidades.
5,5 mm
(7/32'')
Madera
10 mm
(3/8'')
Hormigón
No — ¡Perfecto!
Sí — Este soporte NO es compatible. Visite Mountfinder.Sanus.com o llame al 1-888-333-9952 para
encontrar un soporte compatible.
¿Su televisor pesa
más de 22.6 kg
(50 libras), incluidos
los accesorios?
Lea estas instrucciones en su totalidad para estar seguro de sentirse cómodo con este fácil proceso de instalación. Consulte
también el manual del usuario de su televisor para ver si existe algún requisito especial para instalar su televisor en la pared.
Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalación, del ensamblado o del uso del
producto, póngase en contacto con el servicio de atención al cliente al 1-888-333-9952.
¿Tiene
todas las
herramientas
necesarias?
1
2
3
4
¿De qué está
hecha su pared?
22.6 kg
(50 lb)
¿Listo para
comenzar?
13 mm
(1/2”)
¿Tabiques
de yeso con
montantes de
madera?
¡Perfecto!
DestornilladorCinta métrica Broca Broca
Taladro
eléctrico MartilloLlave de tubo PunzónLápiz Nivel Localizador
de montantes
PRECAUCIÓN:
NO lo instale
en tabiques
únicamente
de yeso
Paredes con
montantes de madera
paredes con de
hormigón
¿Hormigón sólido
o bloques de
cemento?
Llame al 1-888-333-9952
Concrete kit CMK1 (not included)
¿No está
seguro?
PRECAUCIÓN: Evite posibles lesiones personales y daños materiales.
●Este producto incluye instrucciones y elementos de sujeción para su instalación en paredes con montantes de madera,
en superficies de hormigón y sobre bloques de cemento. NO lo instale en tabiques únicamente de yeso.
●Este producto está diseñado para USO EN EL INTERIOR SOLAMENTE
●La pared debe soportar cinco veces el peso del televisor y del soporte juntos.
●No utilice este producto para ningún otro propósito que no sea el explícitamente especificado por el fabricante.
●El fabricante no se responsabiliza por ningún daño o lesión resultante del montaje incorrecto o de uso indebido.

20
NOTA: No todos los accesorios incluidos deberán utilizarse.
ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia.
Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada,
no devuelva el artículo al distribuidor; póngase en contacto con el servicio de atención al cliente. Nunca utilice piezas deterioradas.
Piezas y accesorios suministrados
PASO 1 Fijar la placa de sujeción al televisor
1,1 Mida el patrón de orificios del televisor
1,2 Arme la placa de sujeción del televisor
Determine qué configuración de placa de sujeción debe usar (A, B, C, Do E) segúnlas medidas del patrón de orificios del televisor (Wmm x Hmm).
Los patrones de orificios más pequeños solo requieren placa de sujeción01 . Noutilice las cuatro extensiones de la placa de
sujeción 02 ni los ocho tornillos 03 .
Ensamblelas extensiones 02 dela placa de sujeción y la placa de sujeción 01 tal como semuestra en lailustración. Fijecolocando
ocho tornillos 03 enlos orificios de las esquinas que semuestran en laimagen.
A
B–E
Mida en mm el ancho y el alto del patrón de orificios del televisor. Anote las medidas: Ancho________mm x Alto________mm
ESPAÑOL
Ver página 4
Ver página 6
Dimensiones Ver página 3
1,3 Seleccione el diámetro de los tornillos para el televisor
Enrosque manualmente los tornillos en los encastres roscados del dorso del televisor a fin de determinar qué diámetro de tornillos (M4, M6 o M8) utilizar.
1,4 Seleccione el largo de los tornillos para el televisor
a: Si el dorso del televisor es plano, no se requierenespaciadores 06 , o
07 08 .
b: Los espaciadores 06 , ,y
07 08 y los tornillos largos se proporcionanpara:
• televisores con dorso irregular o redondeado • dejar un espacio adicional para cables o orificios de montaje intercalados
PRECAUCIÓN: Verifique que el tornillo o la combinaciónde tornillo y espaciador enrosquen correctamente.
–Si el tornillo es demasiado corto, no sostendrá el televisor.–Si es demasiado largo, dañaráel televisor.