Sargent ASSA ABLOY FM7100 Series User manual

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
Installation Instructions
FM7100 Series
Multi-Point Lock
RH Door Shown
RIGHT HAND (RH) RIGHT HAND REVERSE (RHR) LEFT HAND REVERSE (LHR)
LEFT HAND (LH)
INSIDE
OUTSIDE
INSIDE
OUTSIDE
INSIDE
OUTSIDE
INSIDE
OUTSIDE
For installation assistance, contact SARGENT at 800-727-5477.
To view the QR Code video clips within this
document, download a free mobile app and
scan the QR Code with your mobile device. The
complete video can be viewed on YouTube at
https://youtu.be/IC8KQeXHCG4

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
2 of 20
Mounting Hardware (Full Scale):
(5)
Flat Head Hex Socket
12-24x1"
(10)
Flat Head Hex Socket
1/4-20x1"
(2)
Drop-in
Anchor
(2)
Drive Pin
(1 Spare)
(2)
Push-on
Retaining
Ring
(1 Spare)
(4)
Oval Head Phillips
12-24x1 1/2"
5/32 Hex5/64 Hex 3/16 Hex
Flat
Head
Phillips
Head Marker Chisel Drill
Tape Measure
Anchor
Set Tool Flashlight Mallot
This device is intended
to be part of an integrated
door, frame and hardware
assembly UL-approved for
both FEMA 361 and FEMA 320
guidelines for both in-swing
and out-swing doors.
Tools Required:
Hollow
Tip Driver
1/8 Hex
Tools Supplied
9/16" &11/16"
Wrench

VERIFY HANDING
Right Hand Door Shown
3 of 20
Left Hand Door Shown
INSIDE OUTSIDE
A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
Right Hand Door Shown
VERIFY DOOR DIMENSIONS
WARNING
LOCK IN condition can occur and EMERGENCY EGRESS
will be prevented if critical dimensions are not met.
Device will not operate, if door cutouts are not within the
dimensions below.
!
4 of 20
If door does not match above
dimensions, contact door
manufacturer.
42" - 42-3/4"
40 41 42 43 44 45 46
37-1/2" - 38-1/4"
36 37 38 39 40 41 42 43
INSIDE OUTSIDE
Required
Door
Dimensions

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
1. INSTALL DEADBOLT ASSEMBLY
5 of 20
(2)
Flat Head Hex Socket
1/4-20x1" Right Hand Door Shown
FM7100
WARNING
Deadbolt must
be retracted
before moving
to the next step.
!
Deadbolt
Installation

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
2. INSTALL BOTTOM BOLT ASSEMBLY
6 of 20
(3)
Flat Head Hex Socket
12-24x1"
2
1
Right Hand Door Shown
FM7100
Bottom Bolt
Assembly
Installation

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
3. ALIGN BOTTOM BOLT ASSEMBLY
1
7 of 20
3
Right Hand Door Shown
UP
DOWN
2OR 2
PUSH
PUSH
FM7100
Bottom Bolt
Assembly
Alignment

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
4. PREP TOP ASSEMBLY
8 of 20
5
Right Hand Door Shown
MARK
CLOSEST HOLE
LAY TOP ROD
ON DOOR
1
4
2
Top Rod
Assembly
Installation
THREAD ON FULLY
AND TIGHTEN 3
IMPORTANT
!

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
5. INSTALL TOP ASSEMBLY
9 of 20
(2)
Flat Head Hex Socket
12-24x1"
Right Hand Door Shown
FM7100
FM7100
Connecting Top
& Bottom Rod
Assemblies

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
6. ALIGN TOP & BOTTOM ROD PINNING HOLES
10 of 20
1
2
Right Hand Door Shown
GO TO STEP 7
GO TO STEP 6a OR 6b
PUSH
Bottom
Rod
Top
Rod
FM7100
Align
Assembly
Pin Holes

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
1
2
Right Hand Door Shown
PUSH
11 of 20
=
3 4
GO TO STEP 7
6a. ADJUST MISALIGNED PINNING HOLES UP
Bottom
Rod
Top
Rod
FM7100
Adjust
Plunger
If Necessary

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
12 of 20
6b. ADJUST MISALIGNED PINNING HOLES DOWN
4
=
3
1
2
Right Hand Door Shown
PUSH
Bottom
Rod
Top
Rod
GO TO STEP 7
FM7100
Adjust
Plunger
If Necessary

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
8. MOUNT DOOR TO FRAME
12
7. PIN THREE ASSEMBLIES
13 of 20
Right Hand
Door Shown
Right Hand Door Shown
(1)
Drive Pin
(1)
Push-on
Retaining
Ring
Do not trim
door if door
rubs along
floor!
!
INSIDE OUTSIDE
FM7100
FM7100
FM7100
Insert
Drive Pin

9. CHECK FOR HOLD OPEN
14 of 20
3
A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
2
1
GO BACK TO
PUSH
GO TO STEP 10
FM7100
FM7100
FM7100
Test
Deadbolt
Retraction
1

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
15 of 20
1
3x
2
10. ADJUST DEVICE
=
!
Hand
Tighten
Device Must
Be In HOLD
OPEN Before
Adjusting
Device
!
Must
Rotate
Exactly 3
Revolutions
!
Plunger
Rotations

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
11. TRIGGER DEVICE & FINAL CHECK
16 of 20
2
PUSH
3
GO BACK TO STEP 10 GO BACK TO STEP 10
PUSH
FM7100
FM7100
FM7100
FM7100
Device
Check 1

12. ASSEMBLE CYLINDER INTO OUTSIDE TRIM
13. MOUNT OUTSIDE AND INSIDE TRIM
17 of 20
(4)
Oval Head Phillips
12-24x1 1/2"
INSIDE OUTSIDE
FM7100
Cylinder
Installation
Mount Inside
and Outside
Trim
A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
14. INSTALL TOP LATCH INTO DOOR FRAME
15. ATTACH DEADBOLT STRIKE PLATE TO FRAME
18 of 20
(4)
Flat Head Hex Socket
1/4-20x1"
(2)
Flat Head Hex Socket
1/4-20x1"
FM7100
FM7100
Top Latch
Installation
Deadbolt
Strike Plate
Installation

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
2
1-1/8" Dia.
x 7/8" Deep
3
16. PREPARE FLOOR FOR BOTTOM STRIKE
19 of 20
1
(2)
Flat Head Hex Socket
1/4-20x1"
c
1 2
e
1 2
d
b
9
12
a
Dimensions for
Bottom Strike
Plate Installation

A8010E 08/16) ( Copyright ©2016, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
20 of 20
2
3/8" Dia. x 1-1/2" Deep
17. INSTALL BOTTOM STRIKE
1
1/4" MAX
1/8" Deep
3
18. TEST INSTALLATION
Bottom Of Door
To Top of Strike
Chisel as required
5/64 Hex
Tighten after
door is adjusted
and works properly.
IMPORTANT
!
Bottom
Strike Plate
Installation