Satir UPC80 User manual

UPC
User’s manual
Thermal Camera Core
Trademark Acknowledgments
• SATIR is a trademark of SATIR Ltd.
• Other names and products not mentioned above may be registered
trademarks or trademarks of their respective companies.
Copyright © 2017 SATIR Ltd. All rights reserved.
nglish

We are very grateful for using our product, please read the manual
carefully before using the camera. It will provide the correct illustration
for you to install and use.
Copyright statement:
SATIR Ltd. owns the copyright of this user’s manual. Without
approve of SATIR, any organization or individual have no right to copy
and reprint any part of it.
SATIR reserves the right to change the functions and
configurations of our products without prior notice.
If you have a problem, which is not mentioned in the manual
during the process of using the camera, please contact us or your
authorized agent.
You can visit our website www.satir.com to get the latest
information for more products.

Contents
1 Reading this first...........................................................................................1
1.1 Safety precautions..............................................................................1
1.1.1 Warning..................................................................................1
1.1.2 Caution...................................................................................2
1.2 Prevent malfunction...........................................................................3
1.3 Maintenance and Support..............................................................3
2 Preface.............................................................................................................4
3 Introduction.......................................................................................................5
4 Moduleintroduction...........................................................................................6
4.1、Main camera...................................................................................6
4.2、Optional lenses...............................................................................6
4.3、Control box......................................................................................6
5 StructureandFunction.......................................................................................7
5.1 Main structure...................................................................................7
5.1.1 Detector type........................................................................7
5.1.2 Housing .................................................................................7
5.1.3 Power system.......................................................................8
5.1.4 Video out...............................................................................8
5.1.5 Control box............................................................................9
5.1.6 Combination control port ................................................. 10
5.2 Function parameters.................................................................... 10
5.2.1 Structure and Appearance............................................... 10
5.2.2 Video format....................................................................... 10
5.2.3 Communication................................................................. 11
5.2.4 Image quality..................................................................... 11
5.2.5 Consumption and Startup time....................................... 11
6 Menuoption................................................................................................... 12
6.1 Menu interface................................................................................ 12
6.2 Temp measurement menu .......................................................... 14
6.3 Non-temp measurement menu................................................... 16
7 Installation...................................................................................................... 18
7.1 Requirements for installer ........................................................... 18
7.2 Tool.................................................................................................. 18
7.3 Start installation............................................................................. 18
7.3.1 Main camera...................................................................... 18
7.3.2 Lens installation................................................................ 19
8 Operatingenvironment................................................................................... 20
8.1 Storage temperature.................................................................... 20
8.2 Operating temperature................................................................. 20
8.3 Working humidity .......................................................................... 20
8.4 Encapsulation standard............................................................... 20
9 ManufacturerDetails....................................................................................... 21
Specifications .................................... Error! Bookmark not defined.

1
1 Reading this first
1.1 Safety precautions
1.1.1 Warning
1、Before using the camera, please ensure that you read and
understand the safety precautions described below. Always
ensure that the IR camera operate correctly.
2、The safety precautions noted on the following pages are intended
to instruct you in the safe and correct operation of the IR camera
and its accessories to prevent injuries or damage to yourself, other
persons and equipment.
3、Use only the recommended power accessories. Use of power
sources not expressly recommended for this IR camera may lead
to overheating, distortion of the IR camera, fire, electrical shock or
other hazards.
4、Do not attempt to disassemble or alter any part of the equipment
that is not expressly described this guide
5、The power matched with IR camera should satisfy manual criterion.
Please contact our agent or us if you are not sure about the
installing power.
6、Stop operating immediately if it emits smoke or noxious
fumes .Failure to do so may result in fire or electrical shock.
Immediately turn the IR camera’s power off, remove the IR camera
battery or unplug the power cord from the power outlet. Confirm
that smoke and fume emissions have ceased.
7、Stop operating immediately if it dropped or the casing damaged.

2
Failure to do so may result in fire or electrical shock. Immediately
turn the IR camera’s power off, remove the IR camera battery or
unplug the power cord from the power outlet.
8、Do not use substances containing alcohol, benzene, thinners or
other flammable substances to clean or main the IR camera. The
use of these substances may lead to fire.
9、Do not handle the power cord if your hands are wet Handling it with
wet hands may lead to electrical shock. When unplugging the cord,
ensure that you hold the solid portion of the plug. Pulling on the
flexible portion of the cord may damage or expose the wire and
insulation, creating the potential for fires and electrical shocks.
10、Do not install camera to the unstable wall and support arm, or
it could lead to injury of people and camera.
11、Please contact us immediately if you meet situations as
follows:
a. The power or control line damaged.
b. Using the wrong voltage and type of power.
c. Cause damage whendropping the camera.
d. The camera occurs functional problems.
e. The camera still working wrong after operating properlyas user
manual.
Warning: Do not aim the IR camera directly into the sun or at other
intense heat source, which could damage the detector of the IR
camera.
1.1.2 Caution
1、Please avoid strong vibration, heavypressure and soaking. Or it
would damage the camera.
2、If you want to change the location of the installed camera, please
makesure turn off the power before start.
3、Please install camera in a well-ventilated circumstance.
4、If the camera work abnormally, please contact us, do not dissemble
or alter camera in any ways. Manufacturer has no responsibility for

3
the problem that caused by the unauthorized alter or maintain.
5、When installing inoutside, please take effective actions to prevent
camera from water, humidity and dust.
1.2 Prevent malfunction
Avoid damaging the detector of the IR camera, please read contents
carefully as follows:
1、Avoid Condensation Related Problems
Moving the IR camera rapidly between hot and cold temperatures
may cause condensation (water droplets) on its external and internal
surfaces.
You can avoid this by placing the IR camera inthe plastic case(bundle)
and letting it adjust to temperature changes slowly before removing it
from the case.
2、If Condensation Forms Inside the IR Camera
Stop using the camera immediately if you detect condensation.
Continue to use may damage the IR camera. Wait until moisture
evaporates completely before resuming use.
3、Storage For a Long Time
Please put the camera into a shady and dry condition when without
operating for a long time.
1.3 Maintenance and Support
For more maintenance and other after-sale service, please refer
to the random guarantee card.

4
2 Preface
Thermal imaging detection technology has been imperative means to
guarantee the safety of industrial production in developed countries. It
is used mainly in many fields such as electrical system, metallurgy,
petrochemical industry, machinery, coal, transportation, firefight,
security, etc. During continuous production task in company, we can
apply thermal imaging detection technology to detect device located
in danger so that avoid stopping procedure of manufacturing and
design. Comparing with the traditional detection method, it is no doubt
that the technology has turned a new leaf in the history of detection
industries.
Thermal imaging technology used widely in all kinds of industries as
follows:
●Detection of electric devices and power transmission line
● Detection of hidden fire in fire fight work
●Rescue and command in fire spot
●Heat leakage and heat analysis of heat channel or heat insulation.
●Heat malfunction locating in an operating train.
●Heat analysis in electronic industry.
●Security surveillance at night in security department.

5
3 Introduction
SATIR Universal Purpose Core (UPC) is an uncooled long wave
thermal imager core which is highly modular design for thermal product
OEMs or integration with their existing products/systems. With the
multiple optional solutions, image processing and the standard video
output, UPC can be easily integrated in the existing surveillance &
security cameras or CCTV systems, robots, UAVs and vehicles.
SATIR UPC is composed of three parts: the main camera, control
box and optional lenses. It provides high-quality infrared thermal image
signal, analog video output and selectable lens matched with different
field of view. It is also simple to installing and operating.

6
4 Module introduction
4.1、Main camera
It turns the thermal radiation into visual infrared images, and
realizes relevant function. Its internal structure is consisted of UFPA
detector and processing main board. The system is designed with a
housing which meets IP40 (optional to IP54) encapsulation standards.
4.2、Optional lenses
It collects radiation coming from target and focuses that on the
detector. According to different field of view, lenses can be classified as
two types: telephoto lens and wide-angle lens. The former can focus
long distance and has a narrow FOV, while the later has a wide FOV but
only focus shorter.
4.3、Control box
The control box is the connection between UPC and external device.
Its function is to divide multifunctional port of UPC into each single
output: power input, video output, COM port (RS232), meanwhile it also
can control the menu settings in UPC.

7
5 Structure and Function
5.1 Main structure
Inside: detector, Main board, other component,
Outside: housing, Connection port, control box.
5.1.1 Detector type
UFPA, uncooled microbolometer, Spectral range: 8~14um,
resolution 160*120, 25um, NETD:80mk@30℃
resolution 384*288, 25um, NETD:50mk@30℃
resolution 640*480, 17um, NETD:60mk@30℃
5.1.2 Housing
Front view Vertical view