Sauber Brilliance Jubilee SJ-200 User manual

User Manual
brilliance jubilee
SJ-200

2
brilliance jubilee

- It’s German for Clean
3
brilliance jubilee
We congratulate you for choosing
the Sauber Brilliance Jubilee,
which provides efficient and
eco-friendly cleaning, using the
natural principle of dry steam.
Before operating your Sauber
Brilliance Jubilee please read this
instruction manual carefully
and keep for future reference.
Approved by the Sensitive Choice®program of
the National Asthma Council Australia and
the Asthma and Respiratory Foundation NZ.

4
brilliance jubilee
IMPORTANT!
The heat generated and steam pressure may have adverse consequences for
certain materials. Always check before putting the appliance into operation
as to whether the surface or material is actually suitable for treatment
with steam. Do this by executing a test on a hidden surface of the material
you wish to treat. The Sauber Brilliance Jubilee should only be used for its
intended purpose as described in this instruction manual.
Do not attempt to open the security cap when the unit is in use. The
boiler is pressurised.
Read this manual carefully
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to
ensure that they do not play with the
appliance.
• To prevent electrical shock, do not
immerse the appliance, power cord or
power plug into water or other liquids.
• Always check the power cord before
use, the power cord and the plug
should be in a good condition and
must not be damaged. If the power
supply cord is damaged or defective, it
must be replaced by the manufacturer,
its service agent or by a qualified
profesional in order to avoid a hazard.
• Do not unplug by pulling on the power
cord. To unplug, grasp the plug not
the power cord. Do not use extension
cords or outlets with inadequate
current carrying capacity.
• Do not handle or operate the appliance
with wet hands and follow electrical
safety precautions at all times.
• Do not aim steam directly at persons,
animals and parts containing electrical
components, such as the electrical
components inside an oven.
• Do not fill the boiler while the power
cord is plugged in. Disconnect the
power supply and unplug the power
cord.
• Do not remove the filler cap while the
appliance is in operation or under
pressure; ensure that it is firmly sealed
before commencing use. When
carrying out maintenance, always open
the filler cap slowly, this will allow any
remaining steam to escape gradually.
• The product is for indoors use only and
not for use outdoors.
• The force and heat of the steam may
damage certain materials. Some
fabrics may react to the temperature of
the steam.
• Do not aim the steam in the same
position for long periods, this can
cause damage to materials!
• Never overfill the tank / boiler.
Overfilling may result in a possible
electrical shock, emission of boiling
water; scalding and steam generation
may be affected.
• Exposure to hot steam can cause
scalding!
Safety Instructions

5
brilliance jubilee
• Do not use the product to clean stairs.
• Burns can occur from touching hot
parts, hot water or steam. Use caution
when draining the appliance after
use as there may be hot water in the
appliance.
• Do not attempt to change the
attachments while the appliance
is emitting steam. Use only
manufacturer’s recommended
accessories.
• Do not leave the appliance unattended
when it is connected to a power
supply or an electrical outlet. Always
disconnect the plug (even when it will
be unattended for a short period of
time).
• Do not clean over floor electrical
outlets.
• Never attempt to steam clean clothes
which are still being worn.
• Ensure that the appliance does not
operate on an empty tank.
• Do not apply steam directly to very
cold glass surfaces.
• Only water should be used in this
appliance. Use distilled/purified water if
the tap water in your area is very hard.
• Damage caused by improper use of
steam on objects, materials, persons
or animals or by not observing the
instructions in this manual will void
warranty.
• Always store the appliance indoors in a
cool and dry place.
• Do not add cleaning solutions, scented
perfumes oils or any other chemicals
to the appliance, as cleaning agents
may damage the appliance or make
it unsafe for use. Only use clean tap
water to fill the water tank.
• Do not use the appliance if there
are any blockages. Switch off the
appliance immediately and wait for
it to cool down before carrying out
any maintenance tasks or clearing a
blockage.
• Do not insert any object in the various
openings of the appliance.
• The nozzle, hose and the attachments
will become hot during use. To avoid
injuries, do not touch the nozzle while
using this appliance.
• This appliance must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least
resistance for the electric current to
flow, this will reduce and prevent the
risk of electric shock. This appliance
is equipped with a cord having an
equipment-grounding conductor
and grounding plug. The plug must
be inserted into an appropriate
outlet that is properly installed and
grounded in accordance with all local
codes and ordinances.
Grounding Instructions

6
brilliance jubilee
B
A
C
E
G
F
D
H L
M N
J KI
P Q
B D
C M
J L
K
Display
Accessories
Hose
A B C D E F G H I
O

7
brilliance jubilee
APatented tank closure (filler cap)
BDisplay
CCarrying handle
DHeater switch
E
Hose connection with security
closure cap
FON/OFF button
GButton for cable compartment
HHose with control handle
IExtension rods
JFloor brush
KFloor brush protection plate
LDiamond shaped brush
MHigh pressure steam nozzles
NSpecial cleaning brushes
OFilling bottle
PWindow Wiper and Brush
QCleaning Clothes
AWater shortage, no heating
BSteam level 1
CSteam level 2
DSteam level 3
E
Low steam in the boiler,
heating up
FWorking pressure, heating up
GMax tank pressure, no heating
HHeating power 50%
IHeating power 100%
JSteam level 1 (•)
KSteam level 2 (••)
LSteam level 3 (• & ••)
MSafety switch
Overview
Display
Hose

8
brilliance jubilee
Open the security
closure cap to
access the hose
connection (E).
Insert the hose
end (H) into the
connector opening
(E). To click it into
place, press the
switch on the hose.
Turn the heater
switch (D) to 100%.
Turn the locking ring in a clockwise direction,
connect the tube then turn the locking ring in an
anticlockwise direction to fasten. Ensure that the
ring is securely fastened onto the tube. The steam
nozzles, floor brush, diamond shaped brush and
window wiper can be connected by following the
same procedure.
2
4
1
3
Assembly
Remove the cable
and plug the cable
into the power
socket. Close the
cable compartment.
Remove the
patented tank closer
(filler cap) (A) and
with the filling bottle
(O) fill it with water.
Note: Only use clean tap water to fill the water tank. Do not add additives, perfumes or any chemical
substances, refer to “Water filling” section on page 10 for further instruction.
Note: The appliance must only be connected to an AC power supply at the voltage shown on the rating label.
Press the button
for the cable
compartment (G)
3
1 2
Start the unit

9
brilliance jubilee
Switch on the unit
by pressing the ON/
OFF button (F), the
orange light will turn
on. On the display
(B) the indicator
“heating power
100%” [I] and “low
steam in the boiler,
heating up” [E] will
turn on.
Wait until the
steamer has
reached “Max
tank pressure, no
heating” [G].
Before cleaning remove condensed water and warm up the
hose by letting off steam for 15 seconds. Press the switches
on the control handle • and • • (L); move the handle away
from you and press the safety switch under the handle [M] to
release steam.
5 6
7
Note: Steam will only release when the safety switch is depressed.

10
brilliance jubilee
Open the cable
compartment.
Remove the cable
and plug the cable
in the power socket.
Turn the heater
switch (D) to 0%
1
2
3
Operation
ATTENTION - The surfaces treated with the steamer have
to be steam and heat resistant. Test the colour fastness in a
hidden corner (excluding: carpets & upholstery). Do not clean
cold surfaces; the sudden rise in temperature can damage the
surface.
Before filling water into the unit always release the remaining
steam in the boiler. The pressure can remain in the boiler for days.
Water filling
Switch off the unit
by pressing the ON/
OFF button (F), the
orange light will turn
off, then unplug the
unit from the mains
power supply.
The patented tank
closure (filler cap)
(A) can only be
unscrewed when
the pressure in the
boiler is below 0.5
bar. Carefully turn
the cap in an anti
clockwise direction.
If steam releases,
do not unscrew the
cap any further. Turn
the cap clockwise
to seal the tank,
then repeat step 2
to 5.
Fill the unit with
water using the filling
bottle (O). Three filling
bottles will fill the
tank to its maximum
capacity. Use warm
water to reduce the
heating time. Close
the patented tank
closure (A) carefully
by screwing the cap
clockwise
5 6
7
Press the switches on
the control handle •
and • •(L) ; move the
handle away from you
and press the safety
switch (M) under
the handle to let out
steam.
4

11
brilliance jubilee
Water shortage, no
heating (A)
Not enough water in the
boiler. When this symbol
is illuminated, the steamer
is no longer heating. All
steam must be released
before opening the safety
cap and refilling the boiler
with water.
Working pressure, heat-
ing up (F)
The water in the boiler is
still cold and heating up.
Wait until the water in the
boiler is heated before
commencing use.
Low steam in the boiler,
heating up (E)
The water in the boiler is
still cold and heating up.
Wait until the water in the
boiler is heated before
commencing use.
Max tank pressure, no
heating (G)
The water in the boiler is
at maximum temperature.
The water is no longer
heating until required.
Heating power 50% (H)
The heating power of the
boiler is at 50%.
Heating power 100% (I)
The heating power of the
boiler is at 100%.
Steam Level 1, 2 and 3 (B,C
&D).
1 – Minimum steam output.
2 – Medium steam output.
3 – Maximum steam output.
Display

12
brilliance jubilee
The steamer can be
used as a powerful
steam mop to clean
(steam level 2), scrub
(steam level 3) and
dry (no steam). To do
so, simply attach the
cleaning cloth onto the
floor brush clamps as
shown.
Click the protection
plate (K) onto the
floor brush (J).
Attach the cloth to
the brush clamps of
the diamond shaped
brush (L).
Attach the cleaning
cloth on all four brush
clamps. Let the brush
glide without pressing
on the floor (Steam
level 1) (J).
Cleaning tiled floors
Carpet cleaning (delicate floors)
Cleaning with diamond shaped brush
1
1
1
2
You can lock or unlock
the brush swivel
according to your
needs. With the
diamond shaped brush
(use steam level 2 (K))
to clean flat smaller
surfaces (eg. wall tiles,
cupboards, working
surfaces, shower cabins,
window frames etc).
2

13
brilliance jubilee
Connect the high
pressure steam
nozzle (M) to the hose
handle. With this
accessory you can
clean toilets, sinks,
grooves, ovens,
shower frames, etc.
Wipe the dissolved
dirt with a cloth.
Steam nozzle
1To remove stains
from carpets (not
wool carpets) hold
the nozzle low and
even above the floor.
Spray a short, strong
steam jet onto the
stain (steam level 2).
Protect your fingers
behind the cloth. If
needed repeat the
process to remove
stubborn stains.
Never treat a stain
by aiming directly
from above.
3
2
4
Natural fibre brush
small/big (ideal for
cleaning delicate
surfaces).
Copper brush (ideal
for scrubbing hard
surface. Pay
attention not to
scratch the surface).
3 4
Drain cleaner
(use steam level
3 to clear drain
blockages).
Small nylon brush
(ideal for scrubbing
tough dirt).
1 2
Accessories for the steam nozzles

14
brilliance jubilee
Press the switches
on the control
handle on 0, turn
the wiper on the
squeegee side and
wipe the window dry
from the top to the
bottom. Wipe away
any residual dirty
water with a cloth.
3
Connect the window
wiper (P) with the
connector to the
hose.
Set the wiper on the
brush side, activate
the steam and brush
the window.
1 2
Window wiper

15
brilliance jubilee
Open the filler cap by following the Water Filling procedure
outlined in this manual. Use the filler cap as a screwdriver to
loosen the drain cap. Ensure that the water is not hot. Rinse with
clear water until no limescale flows out from the boiler.
Overtime limescale residues can deposit in the boiler. The patented system
of the steamer avoids the scaling of the boiler walls. Therefore the boiler only
needs to be rinsed and not descaled with special products.
1
Cleaning the unit

16
brilliance jubilee
Safety feature on:
the red indicator is
visible from the cap
centre and in the
upward position.
Safety feature off:
the red button is
in the downward
position.
Firmly push on the
rubber cap to push
down the red
button.
1
3
2
The filler cap should not be opened when the unit is still under pressure. If
the red indicator on the filler cap is in the upward position this means that the
unit is still under pressure.
Never press the red indicator on the filler cap downwards with an object and
turn the cap at the same time.
When there is no more pressure in the tank, the red indicator will be in the
downward position and the cap can be opened. In case of doubt, contact
Sauber Customer Service.
1. Ensure the tank is empty and there is no steam in the boiler. Turn off the machine
and let it cool down completely, this can take up to a few hours.
2. After the unit has cooled down completely, firmly push down on the filler cap until
the red indicator in the centre of the cap is in the downward position. This will
unlock the cap allowing you to unscrew and remove the cap from the machine.
3. Carefully turn the cap anti-clockwise to remove it from the machine. If steam
releases, do not unscrew the cap any further, allow the machine to cool down then
repeat the above steps.
Filler cap

17
brilliance jubilee
Technical Data
Dimensions: 32 x 54 x 30cm
Weight: 7.3 kg
Voltage: 240V/50Hz
Max heating power: 2000W
Utilisable boiler capacity: 2.4L
Max Pressure in the boiler: 3.6 bar
Boiler Material: Inox steel
Patented self-decalcifying system
Product Name Product Code
Floor tool assembly 31110222
Cloth pad 31400146
Square brush 31151780
High pressure nozzle 31151781
Tool kit 31600041
Plastic bottle 63200313
Safety cap 33101060
Parts and Accessories
For Customer Service or product enquiries please visit our website or call:
1800 SAUBER
1800 728 237
www.sauber.com.au
www.sauber.co.nz
Customer Service

ALSO AVAILABLE
5
YEAR
P
R
E
M
I
U
M
W
A
R
R
A
N
T
Y
5
YEAR
P
R
E
M
I
U
M
W
A
R
R
A
N
T
Y
18
brilliance jubilee

ALSO AVAILABLE
For a complete
healthy home
5
YEAR
P
R
E
M
I
U
M
W
A
R
R
A
N
T
Y
5
YEAR
P
R
E
M
I
U
M
W
A
R
R
A
N
T
Y
ALSO AVAILABLE
19
brilliance jubilee

2YEAR
P
R
E
M
I
U
M
W
A
R
R
A
N
T
Y
2YEAR
P
R
E
M
I
U
M
W
A
R
R
A
N
T
Y
2 Year Warranty
BRILLIANCE JUBILEE
Conditions of warranty
Your Sauber cleaner, in the case of domestic use,
has a 2 year parts and labour warranty, in the case
of commercial use, is limited to a 6 month parts and
labour warranty on the body and pump and 3 month
on the fittings, against product defect and failures
when the product is used in accordance with the
terms and conditions of this warranty statement.
This warranty commences from the original date of
purchase and is not transferable; please retain your
original proof of purchase for any warranty claims.
This warranty is valid only in the country where the
steam cleaner is purchased.
The appliance must be operated in accordance
with these instructions and used only for domestic
steam cleaning applications. This appliance is not
fit to be used as an industrial and if used in these
circumstances may be harmful to your appliance and
may void the manufacturer’s warranty.
Accessories and consumable, unless defective in
manufacture, are not subject to this warranty. In order
to prolong the life of accessories and consumable,
regular care and maintenance is recommended.
When properly used and cared for, your steam cleaner
will render excellent service; refer to the instruction
manual for further details, as misuse or failure to
follow the instructions makes this warranty void.
In the event of service or advice being needed, please
contact Sauber Customer Service, Level 1, Building
2, Brandon Business Park, 530 Springvale Road,
Glen Waverley, Vic 3150, or on 1800 728 237,
Monday-Friday 9am-5pm EST.
The decision to repair or replace the cleaner is at the
sole discretion of Sauber. If Sauber decide to repair
or replace the cleaner, it will do so at its own cost.
Sauber is unable to accept responsibility under
this warranty for any repair work not carried out by
an authorised Sauber Service Agent or from the
use of non-genuine parts. If any part is no longer
available or manufactured, Sauber will replace it
with a genuine functional replacement part. This
warranty does not apply to the cost of replacing any
parts of the product due to normal wear and tear,
alterations, improper installation, physical abuse,
misuse or accidental damage. Any transportation
costs involved in the repair of defective parts shall be
borne by the claimant.
If proof of purchase cannot be provided at the time of
a warranty claim or service, any work carried out on
the cleaner is chargeable.
The repair or replacement of the cleaner under
this warranty does not extend the original period
of warranty.
The benefits conferred by this warranty are in
addition to all other rights and remedies in respect
of the product as outlined under the Competition and
Consumer Act and other State and Territory laws.
“Our goods come with guarantees that cannot be
excluded in the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure
and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.”
V1 09/16