Savic Hamster Plaza User manual

Hamster Plaza
collapsible small animal home
www.savic.be
Ringlaan 10 • B-8501 Heule • Belgium
Tel. [phone] • Fax [phone]
[e-mail]
Doc.nr.: 931920
Assembly instructions for Hamster Plaza
Richtlijnen voor de montage van Hamster Plaza
Instructions pour le montage de la Hamster Plaza
Aufbau-Anleitung des Hamster Plaza
Instrucciones de montaje de la Hamster Plaza
инструкция по сборке Hamster Plaza
100 x 50 x 50 cm

Savic would like to thank you for your purchase and
condence in our Hamster Plaza cage.
We can assure you that you have acquired a high
quality small animal cage.
Please take a few minutes to read these instructions
fully to ensure a perfect awless assembly of your
Hamster Plaza cage.
Check that you have all the contents as per the list
on the following page. If any component parts are
missing or damaged, do not use your cage.
More information and instruction video on
www.savic.be
The Hamster Plaza box contains:
• 1 plastic bottom part (a)
• 1 platform (b)
• 4 xings for platform (c + d)
• 1 ladder (e)
• 4 side proles (f)
• 4 corner pieces (g)
• 1 wheel (h)
• 1stainless steel feeding bowl (i)
• 1 drinking bottle + holder (j)
• 1 small animal house (k)
• 2 side panels (l)
• 1 front panel with door (m)
• 1 back panel (n)
• 1 roof panel (o)
f
g
k
h
i
j

a
b
c
e
l
m
d
n
l
o

1a
Attach the 4 corner pieces (g) on one side of each of the 4 profiles (f).
2a 2b
Slide one side panel (l) into two profiles (f).
Slide the back panel (n) in the third profile.
Make sure that the vertical wires of the back panel and the closure of the side panel are facing outwards.
1b
1c
g
f
3b3a
l
n

4a Slide the second side panel (l) into the final profile.
Make sure the closure is facing outwards.
4b
5
Put the cage part on the bottom tray as shown in the picture.

6a
7a
Insert 4 x d in the platform (b). Place the platform in the corner of the side and back panel.
Do not tighten the screws (c) too strongly.
The platform has now been installed. Attach the ladder (e) to the platform.
7b
6b
6c 6d
e
d
b
c

8
Assemble the remaining accessories: wheel (h), feeding bowl (i), small animal house (k) and drinking bottle
(j).
9a
Slide the front panel with door (m) into the profiles.
9b
m
h + i + k + j

Finally, fix the closures of the side panels well to the bottom. Your cage is
now ready to be used.
10a
Place the roof panel (o) on top.
Make sure that the thick horizontal wires of the front,
back and side panels are well assembled in the roof panel. (see detail).
10b
11a 11b
o
ATTENTION
To avoid leakage,
always ll bottle 100%.
Rince spout with hot water
before rst use.