Savic Noah Knock Down User manual

Noah Knock Down
collapsible bird home
www.savic.be
Ringlaan 10 • B-8501 Heule • Belgium
Tel. [phone] • Fax [phone]
[e-mail]
Doc.nr.: 931197
Assembly instructions for the Noah Knock Down
Richtlijnen voor de montage van de Noah Knock Down
Instructions pour le montage de la Noah Knock Down
Aufbau-Anleitung des Noah Knock Down
Instrucciones de montaje de la Noah Knock Down
инструкция по сборке Noah Knock Down

Savic would like to thank you for
your purchase and condence in
our Noah Knock Down cage.
We can assure you that you have
acquired a high quality bird cage.
Please take a few minutes to
read your instructions fully to
ensure perfect awless assembly
of your Noah Knock Down cage.
Check that you have all the
contents as per the list on
the following page. If any
component parts are missing or
damaged, do not use your cage.
THE NOAH KNOCK DOWN BOX
CONTAINS:
• 1 plastic base (a)
• 1 back panel (b)
• 1 front panel with door (c)
• 2 side panels (d)
• 3 wooden perches (e)
• 4 side proles - 512 mm (f)
• 2 feeding bowls (g)
• 4 bottom corner pieces (h)
More parts
on following page
a b
cd
efg
m
h
d

The Noah knock down box contains:
• 1 roof panel - 740 x 50 mm (i)
• 2 roof proles - 740 mm (j)
• 2 roof proles - 440 mm (k)
• 4 top corner pieces (l)
i
j
j
k
l
k
ll
l
1a
Attach on one side of a roof profile -
740 mm (j) a top corner piece (l).
Attach on the other side of the corner
piece a roof profile - 440 mm (k) as show
in picture 1 a & b.
1b
Make sure that the grooves of the panels are
facing inwards as shown on picture 1 d.
1c
1d

2a
Slide the roof panel into the roof profiles. Make sure the thick vertical wires are facing downwards.
Attach another top corner piece on the other side of the short roof profile.
Attach 2 side profiles of 512 mm (f) on the roof. Slide the back panel (b) into those 2 profiles.
Make sure that the vertical wires of the panel are facing outwards.
4
Assemble the 2 remaining side profiles (f ) on the
roof.
3
2b
Slide the remaining roof profile - 774 mm over the
roof panel and attach a corner piece.
Finally, slide the last roof profile - 440 mm over the
roof panel and attach the last top corner piece.
The roof of the bird cage is now installed.
5a 5b
6
Slide the 2 side panels (d) in the vertical profiles on both sides. Make sure that the closures are facing
outwards. Finally, slide the front panel in the vertical profiles. Make sure the door is facing outwards.
Fix the 4 corner pieces (h) on the vertical profiles.
7a 7b
8a 8b
The wire part of your cage is now assembled.
Turn the wire part upside down and put in on the
plastic tray.
9 10
Install the accessories and your cage is now ready
for use.

www.savic.be
Ringlaan 10 • B-8501 Heule • Belgium
Tel. [phone] • Fax [phone]
[e-mail]
Doc.nr.: 931197