SC&T HE01SE User manual

Smart Cabling & Transmission Corp.
V1.0
HDMI Extender
User Manual
Model : HE01SE
HDMI CAT5e Extender-Single CAT5e cable 1080p 40M

1
User Manual
HE02EI
Introduction
HE01SE is an HDMI extender that uses an Ethernet cable to extend HDMI signal with transmission
distance up to 70 meters and resolution up to 1080p. The Tx unit has a built-in EDID auto backup
function that can save desired resolution and restore it whenever. The RX unit has a built-in HDMI
connector that allows the receiver to directly connect to an HDMI display without any external power
required.
Features
Resolution up to 1080p.
Signal extension up to 50M.
No external power required for RX unit.
Supports EDID management.
Installation View
Panel View & Function
HE01ST
EDID Setup
Use default EDID:
Move DIP switch 1 off ↑
Move DIP switch 2 off ↑Select the first default EDID: support 1080i / LPCM 2 Channel.
Move DIP switch 2 on ↓Select the second default EDID: support 1080p / LPCM 5.1 Channel.
HE01ST

2
User Manual
HE02EI
Use external EDID:
1. Move DIP switch 1 on ↓, HE01ST unplug the power.
2. HE01ST connect to HDMI connector of TV for auto backup.
3. Plug the power for HE01ST, TV EDID back up completed (Blue Power LED keep flash).
4. After complete TV EDID backup, HE01ST power must be reset (unplug and plug) to activate the new EDID.
Transmitter Unit LED Indication
BLUE ON Power on
Flash TV EDID backup completed
RJ45 Connector LED
GREEN ON Sending power or video to receiver unit
YELLOW ON No data input or unsupported video format
Dip Switch function
1. ↑Use the default EDID.
↓Use the backup TV EDID.
2. ↑Select the first default EDID: Support 1080i / LPCM 2 Channel.
↓Select the second default EDID: Support 1080p / LPCM 5.1 Channel.
After complete Dip Switch setting, power must be reset (Unplug and plug) to activate the new EDID.
HE01SER
HE01SER Receiver Unit LED Indication
GREEN ON Sending power or video to receiver unit
YELLOW ON No data input or unsupported video format
Cable
Link cable using high quality CAT5e UTP or CAT6 UTP cable.
CAT6 cable is recommend based on distance over 30 meters.
Do not use STP cable which caused no picture.

3
User Manual
HE02EI
Transmission Distance
The transmission distance will be affected from different HDMI equipment and cable quality. Lower
resolution and good quality cable could extend longer distance up to 100 meters.
HE01ST to HE01SER
Resolution/Cable
Distance(Meter)
1080p/CAT5e
40
1080p/CAT6
45
1080i,720p/CAT5e
60
RJ45 Define
Video Link (use TIA/EIA-568-B)
1. Orange-white
TMDS DATA2 +
2. Orange
TMDS DATA2 -
3. Green-white
TMDS CLOCK + / HDMI 5V
4. Blue
TMDS DATA1 +
5. Blue-white
TMDS DATA1 -
6. Green
TMDS CLOCK - / HDMI 0V
7. Brown-white
TMDS DATA0 +
8. Brown
TMDS DATA0 -
Caution
1. The cabling must away from any equipment with electromagnetic wave, such as microwave ovens,
mobile phones, radio equipment, power lines.
2. Our HDMI CAT5E Extender not networking product, please do not connect with any Ethernet to avoid
any damage.

4
User Manual
HE02EI
Specification
ITEM NO.
HE01ST
HE01SER
Support
Compliance
HDMI 1.3, HDCP, 3D
Max. Video Resolution
1080p@60Hz
Max. Transmission Distance
60M at 1080i, 40M at 1080p
Video Bandwidth
2.25 Gbps
Ports & Interfaces
Video Input
1 x HDMI Type A Female
1 x RJ45
Video Output
1 x RJ45
1 x HDMI Type A Female
Power
Power Supply
DC 5V 1A
Power Consumption
600mA
Ambient Temperature
Operation
0 to 55℃
Storage
-20 to 85℃
Humidity
up to 95%
Physical Characteristics
Dimensions
67 x 91 x 27mm
57.5 × 24 × 20.2mm
Weight
140g
20g