SC&T SP001P-AC220 User manual

Smart Cabling & Transmission Corp.
V1.0
Surge Protector
User Manual
Model : SP001P-AC220
AC Power Surge Protector for power AC220-240

1
User Manual
SP001P-AC220
Introduction
SP001P-AC220 is a surge protector designed to protect power from high voltage surges, with up to AC220
to 240V for power input...
Features
Supports power input up to AC220 to 240V
Response time less than 1 ns.
SP001P-AC220 AC Power Surge protection Device Terminal Connector
Terminal connector to terminal connector.
Application for protect AC220-240V
Providing protection for equipments or instruments with power consumption below 4Amp.
Installation View
SP001P-AC220
Installation Instruction
1. Connect the protected equipment to “LOAD" T1、T2 terminal.
2. Connect AC power cord to "LINE" L1、L2 terminal.
3. The all terminals without voltage polarity restrictions.
4. To ensure the effective protection of your equipment, the ground terminal “E” must be grounding
and grounding resistance should less 100Ω.

2
User Manual
SP001P-AC220
LED Indication
1. LED on: normal
2. LED off: failed
Caution
Make sure the grounding terminal "E" connect to the lightning protection grounding. Do not access to the
power ground wire, ground rod, and gas pipelines
Specification
ITEM NO.
SP001P-AC220
Support
Nominal Peak Voltage
Greater than 300V
Surge Current Capacity
6000A (8 x 20uS)
Surge Voltage Capacity
6000V (1.2uS x 50 uS)
Response Time
Less than 0.1 uS
Leakage Current
Less than 1mA (at 300VAC)
Max. Load Current
4A
Ports & Interfaces
Video Input
1 x 3-pin Terminal Block
Video Output
1 x 3-pin Terminal Block
Ambient Temperature
Operation
0 to 55℃
Storage
-20 to 85℃
Humidity
Up to 95%
Physical Characteristics
Dimensions
67 x 87 x 28.5mm
Weight
140g