SC&T SP008 User manual

Smart Cabling & Transmission Corp. V1.0
Surge Protector Series
User Manual
Model : SP008
HDMI Surge Protector

1
User Manual
SP008
Introduction
SP008 is a surge protector designed to protect HDMI devices from high voltage surges, supporting
resolution up to 4K.
Features
Resolution up to 4K.
Built-in ESD, EFT (Impulse Noise) protection
Response time less than 1 ns.
Installation View
1. SP008 Equipment End, connect to HDMI input/output.
2. Using one unit of SP008, Cable end connect to HDMI output side.
3. Using two units of SP008, connect the HDMI cable between two of SP008’S cable end.

2
User Manual
SP008
Recommend Cable:
1. Recommend use high quality HDMI 1.4 cable.
2. In order to have the best protection performance, the HDMI cable between HDMI equipment and SP008
surge protector should be less 1 meter..
Panel Review
HDMI Cable Distance and Caution:
1. For ensuring the unit can protect equipment, the earth cable must be connected to ground.。
2. Based on 4K2K resolution, the HDMI cable must less 3.5M.
3. Based on 1080P resolution, the HDMI cable must less 5M。

3
User Manual
SP008
Specification
ITEM NO.
SP008
Support
Compliance
HDMI 1.4, IEC61000-4-2,IEC61000-4-4,IEC61000-4-5
Response Time
Less than 1ns
ESD Protection
15 KV(ESD), 8 KV (Contact)
EFT Protection
40A ( 5/50ns )
Lightning Protection
5A ( 8/20 us )
Surge Life
300 times (100A per surge)
Ports & Interfaces
Equipment End
1 x HDMI Type
Cable End
1 x HDMI Type
Ambient Temperature
Operation
0 to 55℃
Storage
-20 to 85℃
Humidity
Up to 95%
Physical Characteristics
Dimensions
58.3 x 25.4 x 25.4mm
Weight
35g