SC&T EP01 User manual

1
EASY POE TRANSMISSION
–
Passive
ITEM NO: EP01
The EP01 Easy Passive POE (Power Over Ethernet), uses unused pairs of 100baseT network
cable to transmit power to remote It is a low costs and easy solution of providing power for
network products which do not support Power Over Ethernet Such as IP cameras, access
points, routers, modems, switchers, embedded computers or other network devices
Over a short distance, its usually possible to use the power adapter of the powered device
such as wireless AP, IP camera, etc The working distance normally around 30 – 40 meters
The real distance depends on the power supply, cable type and powered device
EP01 Easy POE – Passive
Send power to remote over unused pairs of 100baseT network cable.
Including 2 units/one pair, do not include power adapter.
Working distance depends on the power supply, cable type, and powered device.
Installation View:
Note: The power voltage must go through a regulator (ref. page 2 optional model) if the
output voltage is higher than the equipment voltage.
Pin
Color
RJ
5
PLUG
RJ
5
JACK
Color
Pin
1
W
-
O
Data Pair 1
Data Pair 1
W
-
O
1
2
O
Data Pair 1
Data Pair 1
O
2
3
W
-
G
Data Pair 2
Data Pair 2
W
-
G
3
BL
N C
Power
+
BL
5
W
-
BL
N C
Power
+
W
-
BL
5
6
G
Data Pair 2
Data Pair
2
G
6
7
W
-
BR
N C
POWER GND
W
-
BR
7
8
BR
N C
POWER GND
BR
8
Specification:
ITEM NO.
EP01
Ethernet Connector RJ45
Ethernet Data Rate 10/100Mbps
Storage Temperature - 20 to 80 degree C
Operation Temperature 0 to 55 degree C
Humidity (non-condensing) 0 ~ 95%
DIMENSIONS W x H x D mm
53.3 x 25 x 20.7
Weight (g) 30

2
Option for EP01:
PC1A-5V AC/DC 5V Power Converter 1000mA Max
AC/DC to DC5V power converter
Input power: AC20 – AC28V; DC12-30V
Output Power: DC5V regulated
 Application for sending computer accessories 5V power from power sources AC24V or DC12V
PC1A AC/DC to DC12V Power Converter 1000mA Max
AC/DC to DC12V power converter
Input power: AC20 – AC28V; DC12-30V
Output Power: DC12V regulated
 For DC type camera or video power sources convert using AC24V for professional CCTV Industry
Installation
Specification:
ITEM NO. PC1A PC1A-5V
INPUT POWER AC20~28V; DC16~30V
AC8 ～ 26V ； DC8 ～ 28V
OUTPUT POWER DC12V DC5V
OUTPUT CURRENT 1000mA
MATERIAL Metal
DIMENSIONS mm
102.8 x 25.4 x 25.4 89 x 25.4 x 25.4
WEIGHTS g 80 78
Rev B