SC&T IR Transmission Series User manual

Smart Cabling & Transmission Corp.
V1.0
IR Transmission Series
User Manual
Model : IEC-3501E-05
Single IR Emitter (Non-Blinking)

1
User Manual
IEC-3501E-05
Introduction
IEC-3501E-05 is a single IR emitter..
Features
Cable length 300cm...
Diagram
Installation View
Standard installation
IEC-3501E-05 or IEC-3502E-05
1. IR emitter (flat side) attached directly to IR
sensor window
2. More reliable activated
3. Looks nice

2
User Manual
IEC-3501E-05
Attach IR emitter at inside of shelf
Cabinet With door Installation
Note
1. Make sure mounting surface are clean and dry for fixed well
2. You cannot connect the IR emitter directly to a power supplies or battery
Specification
ITEM NO.
IEC-3501E-05
Support
Reception Angle
±45°
Ports & Interfaces
Connector
1 x ⌀3.5mm Mono Plug
Physical Characteristics
Cable Length
3M
1.Attach IR emitter on above or below of the IR window
2.Less reliable activated
IEC-3501E-05 or IEC-3502E-05
1. IR emitter is attached to rack door,round shape side
facing the IR window
2. Less reliable activated