Schaerer Coffee Vito User manual

Weekly cleaning
Schaerer Coffee Vito
This cleaning is only necessary for
machines with the option “Powder-
system”.
Switch off the machine with the►button.
Remove mains plug.►
Refer to the safety instructions and to the chapter „Cleaning“ inside the user manual!
Never reach into the machine or under the beverage outlets during the automatic cleaning!
Execute the weekly cleaning process in minimum once per week! The weekly process is complementary
to the daily cleaning and does not replace it!
CAUTION!
User at risk!
CAUTION!
Machine at risk!
Mixing bowl (Powdersystem)
Remove the left front cover (as shown in►
the picture).
Remove the topping hose from the beve-►
rage outlet.
3
Disassemble the mixer bowl.►
Clean all parts under warm, running water.►
Allow all parts to dry completely.►
4
Slide the lever (as shown in the picture) to►
unlock the mixer bowl.
Mixer bowl will be released.;
Clean the interior with a tissue.►
Re-assemble the mixer bowl parts.►
Replace the mixer bowl.►
Close the lever to lock the mixer bowl.►
Re-connect the mixer hose to the mixer►
bowl and the outlet.
Re-place the left font cover.►
5
12

Schaerer Ltd. Cleaning instructions / 12.2009 / V02
Allmendweg 8
4528 Zuchwil
Switzerland
[e-mail] / www.schaerer.com N° 022041
Reach into the brewer area under the►
brewing unit with one hand and release the
retaining catch.
Brewunit slips downwards!;
Slowly move the brewing unit downwards,►
tilt and pull forward.
Switch off the machine with the►button.
Remove mains plug.►
Push the beverage outlet to the highest►
position.
Remove grounds container.►
Remove drip tray.►
Use the mulit tool to open the brewer com-►
pletely by turning anti-clockwise until the
end point is reached.
Turn 90° back in clockwise direction.►
3
Brewing unit
When operating movable parts, there is a risk of injury due to crushing!
Never clean the brewing unit in a dishwasher and never use any cleaning additives.
CAUTION!
Risk of squeezing!
CAUTION!
Machine at risk!
Push both springs outwards over the►
edges and unlock.
Swing the slide upwards.►
Remove residues using a brush.►
Clean thoroughly under warm runnig►
water.
4
Clean the brewer sieve under running►
water or by using a cloth.
Allow to dry completely before replacing in►
the coffee machine.
Remove coffee ground residues in the►
brewer area.
Reinstall the dry brewing unit.►
5
Water tank (option)
This cleaning is only necessary for
machines with the option “Water
tank”.
Clean thoroughly under warm runnig►
water.
1
Option: With water tank
Remove water tank.►
2