Schartec YET402PC-V2.0 User manual

External Wireless Receiver
YET402PC-V2.0
Technical Data:
1. Power Supply: 12-24 V DC
2. Frequency: 433.92 MHz
3. Channels: 2 relay outputs
4. Max. Memory: 400 remote controls
Antenna
Relay output 1
Relay output 2
Power Supply:
1. Positive
2. Negative
Programming:
Press the "Learn 1" or "Learn 2" button for 1 second. The "Learn LED" will light up. Now press and
hold the desired button on the hand transmitter. The "Learn LED" will flash and the go out. The hand
transmitter is now learned to the the radio receiver channel.
Repeat this procedure for each other hand transmitter.
Erase encoding:
Press and hold the "Learn 1" or "Learn 2" button until the "Learn LED" goes out. All encodings are
now deleted.
Caution:
To avoid possible interference, the radio receiver should not be placed in the immediate vicinity of
the control unit.
Declaration of Conformity (CE)
Schartec wireless receivers and remote controls meet the requirements of the applicable European and national guidelines. The conformity has
been proven, the corresponding declarations, certificates, test reports and documents are deposited with the manufacturer and can be requested
if required.
Important! Keep out of hands of children. Remote controls may only be operated by persons who are familiar with the system and have been
instructed in their function. Use the remote control only when you are in sight of the door / gate.
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be delivered in the
appropriate acceptance and collection points.
The complete version of the battery law can be found here:
http://www.gesetze-im-internet.de/bundesrecht/battg/gesamt.pdf