Schlage GF3000 Gravity Force Series User manual

*30500*
30500
Mortise: Standard, TRD, BRD
Surface Mount: SM, and TJ
GF3000 Gravity Force
Shear Locks
Installation instructions
Contents
Warnings and Cautions .............................................................. 2
Tools Needed.............................................................................. 2
............................................................................... 2
Operation.................................................................................... 2
 ............................................................................. 2
Installation .................................................................................. 3
  ................................................... 3
2 Prepare the frame. (Standard and TRD)...................... 4
Prepare the frame. (TJ and SM) .................................. 4
 ............................................... 5
3 Prepare the door. ......................................................... 6
  ............................................................. 8
 ............................................................. 9
Wiring Diagrams ...................................................................... 10
 ........................................... 11
Air Gap Adjustment................................................................... 11
Optional Monitoring Outputs..................................................... 12
GF3000 Standard
GF3000TRD

GF3000SM GF3000TJ

2
Warnings and Cautions
WARNING


CAUTION



NOTICE


Tools Needed
• 
• Tape Measure
• Hammer
• 
• 

• Chisel
• 
• Set of Hex (Allen)

• Set of Philips Head

• 



• 
Demolition Hammer

Certifications
• UL# R12092
• MEA# 222-96-E
• 
Operation











Specifications
Electrical
Input Voltage 

Input Current 
Adjustable Time








DSM 
28VDC
 
30VDC

DSM 
30VDC
 
24VDC
Mechanical



handed
Shear Holding

3000 pounds maximum
 1C\v" minimum
Plating. 

Shipping Weight GF3000 - 6 Pounds


Magnet 9.5" L x 1.5" W x 1.5" H

Mounting Tabs
11.56" L x 1.5" W x 1.5" H
Armature 8.38" L x 1.38" W x 0.5" D
 10.63" L x 1.38" W x 1.0" D

Magnet Housing 9.81" L x 1.25" H x 1.5" D
Armature Housing 8.38" L x 1.38" W x 0.5" D

3
Installation
1 Establish centerlines.
1a Determine the mounting position.


LIn some applications, the door and frame may require
reinforcement.
1b 
LFor proper operation, centerlines on door and jamb
must be precisely aligned.
Standard
Top of door

Door jamb
Door




TRD
Top of door

Jamb
Door




BRD



Threshold
Door




TJ
SM

4
2 Prepare the frame. (Standard and TRD)
2a 
Hollow Metal or Aluminum
Reversible mounting tab
LSee included template.
Wood
LSee included template.
2b 

16 gauge hollow metal frames Z\," thick aluminum frames
2 Prepare the frame. (TJ and SM)
TJ (inswing) SM (outswing)

OR
OR

5
2 Prepare the floor. (BRD)
2a 
7.5" min.


threshold box
End view Side view
.5" min.

threshold plate
2.375"
min.
• 
• 
• 
• Installed magnet must not protrude above installed
threshold.
• 
proper level.
• 
• ¹

the 

L

2b Install the threshold box.
• Feed ¹" diameter hole in threshold box.
• 
• 
• 

6
3 Prepare the door.

 Reference drawing
Standard 
Aluminum
¹"
¹" to 1"
1" to 1 ³"
1 ³" to 2 ¹"
Wood all
TRD 
Aluminum door

adjustment is

1 ³"
Glass
Adjustment

 


1 ³" min Glass
Adjustment


7
Model Door type Reference drawings
 
a d e f
door interior
b


a sex bolt
b ¹" hole
¹" hole
d
e armature
f ¹-20 x 2
g ¹

WARNING
C\v” (45 mm) doors




bolt must be tightened to at least 120 in.-lbs. for



󰀨
󰀨

loosen over time.

Metal
door interior
d e f
g
Wood
door interior
a d e f
b

8
4 Install the lock.
Mortise Mount: Standard, TRD
4a 
See "Prepare the door." on page 6to determine the installation method.
4b Install magnet into frame.
See "Prepare the frame. (Standard and TRD)" on page 4to determine the installation method.
 
9.
Mortise Mount: BRD
4a 
1. Mount mounting bracket to bottom rail using #10-24 x ³" Pan head screws supplied.
2. Mount armature
3. Remove end

expose
adjustment. If

have a
removable end


be drilled in
edge of door

approximate
dimensions as

4b Mount magnet into
the threshold box.
1. 
speed nuts



2. Line up
magnet over speed nuts. Insert
¹

3. 
LNOTE: Top surface of magnet must not protrude above top surface of threshold.
4. 
5. ¹


6. ³¹
7. 11.
8. 
out.
9. 10.
L
 
9.
Threshold

MagnetThreshold box

Speed nuts
#10-24 x ¹"

Mounting

Armature
#10 -24 x ³"

Approx.
1 ¹"
Min. 1"
Max. 2"
Control
module
Approx.
¹" gap
Door status
monitor

9
Surface Mount: TJ, SM
4a 


armature housing
onto door.
4b 

(a) into magnet
housing.
Tighten set

 


in magnet housing (b).

#10 x ³ sheet metal
¹


housing to frame.
LDO NOT

TIGHTEN AT THIS
TIME.
4d Install Magnet


"Wiring Diagrams" on
page 10).
Insert the magnet (a)
into magnet housing.
¹


armature housing onto
door..
4e 


9.
Auto Relock Time Delay
Standard, TRD, TJ, SM
1. 10

2. 
3. Remove 

4. 



LNOTE: If a mistake is made, wait 10 seconds, then
repeat Step 4.
5. 

6. 
BRD
1. 

L
2. 
3. 



LNOTE: If a mistake is made, wait 10 seconds, then
repeat Step 3.
LNOTE: A pushbutton switch may be used if desired.
4. 

5. 
6. 
ARS.
a
b
a

b
a
b

10
Wiring Diagrams
Standard, TRD, TJ, SM
Standard features
Operating Voltage 
 
 


Control
module
Door status monitor
(optional)
POWER
Filtered
12 or 24VDC input

(optional)
White (COM)
Green (N.O.)
Red (N.C.)


Green (N.O.)
Red (+)


BRD
Standard features
Operating Voltage 
 
 



White White
CN.C.

needed to mount



used to set ATD
White
Red
Control
module
Coil



Violet


Red
White
Red (+)



Green (N.O.)




(optional)

11
Door Status Monitor (DSM) (BRD)
• 
frame.
• 
• ³"
diameter
• 
diameter
• 


• 
• 
• 

• 
• 
• 

• 
• ¹
Air Gap Adjustment
Standard, TJ and SM


least ¹" and must be less than ¹".
BRD and TRD


least ¹" and must be less than ¹".
• 6
• 6
"
³"
1 "
1 "
¹" gap max
³"
1" dia.
1" dia.

aluminum doors

metal doors
Magnet  

red (N.C.)
DOOR FRAME

© Allegion 2018
Printed in China

Customer Service
1-877-671-7011 www.allegion.com/us
Optional Monitoring Outputs
Door Status Monitor (DSM)



Magnetic Bond Sensor (MBS)








GRNN.O.
REDN.C.
WHT C
Door open
GRNN.O.
REDN.C.
WHT C

GRNN.O.
N.C.
 C

GRNN.O.
N.C.
 C


Additional Notes: Revision History Revision Description:
G > Revised artwork
1. Fold booklet style B C D E F G
060183 061063 021384 062530 065782 077349
Material
White Paper
Edited By Approved By EC Number Release Date
M. Sasso P. Bockelman 077349 11-02-18
Notes
1. printed two sides
2. printed black
3. tolerance ± .13
4. printed in country may vary
5. drawings not to scale
Title
SHEET, INSTALLATION, GF3000
Creation Date
10-05-10
Number
30500
Revision
G
Created By
M. Coleman Activity
3899 Hancock Expwy
Security, CO 80911 © Allegion 2018Software: InDesign CS6
16.500
11.700
BEGINNING SHEET
FRONT
8.300
11.700
FOLDED SHEET
FRONT