Schlage L-SERIES User manual

L-SERIES
Extra Heavy Duty Mortise Locks

Extra Heavy Duty Mortise Locks
The Schlage L-Series mortise lock line is a heavy duty commercial mortise lock
containing a wide array of knob and lever designs. It is available in a variety
of keyed and non-keyed functions, and in most popular decorative finishes.
It is U.L. Listed and can be specified for applications in offices, schools, hospitals,
hotels, and commercial buildings, as well as residences. The L-Series lock meets
or exceeds the ANSI A156.13 specification, making it the best choice for any
building where security, safety, and design compatibility are the prime considerations.
The L-Series lock uses one common mortise lock case for all trim. This allows
excellent design flexibility in trim combinations such as knob by lever, lever by
knob, as well as knob by knob or lever by lever. The outstanding feature of
its quickly-reversible handing, allowing orders to be filled quickly at the
distributor level from stock on hand. Our L9000-Series mortise lock can
be easily handed on-site without disassembling the lock case.
SERIES
L
Armored Fronts 21
Cylinders 14-17
Cylinder Cams 18
Cylinder Collars 19
Designs & Finishes 3-5
Door Handing 22
Door Preparation 2
Electrified Locks 20
Escutcheons, Roses, Special Turns & Finishes 6
Cutaway View 2
Functions 7-13
How to Order 23
Interchangeable Core 16-17
L-Mediterranean Designs & Finishes 5
Performance Features 2
Primus®Cylinders 14-15
Primus Interchangeable Core 16
Small Format Interchangeable Core 17
Specifications 1
Strikes 21
On our cover, the L9453P 17L in Bright Bronze.

Specifications
Applications: For commercial and institutional buildings where
the finest in mortise locks are required.
Certifications: L9000: ANSI A156.13 Series 1000,
Grade 1 Operational and Security, UL Listed for 3-hour
fire door (except L9076 and L9077). With interchangeable core
cylinders: Grade 2 Security. L400: ANSI A156.5 Grade 1
UL Listed auxiliary lock for 3-hour fire door.
With Concealed Cylinder: A156.13 Grade 1 Operational and
Security. ANSI/ASTM F476-76 Grade 40, UL Listed.
Exposed Trim:
Knobs: #41 and #42 heavy duty wrought brass, bronze or stainless
steel knobs match in appearance and are equal to D-Series knobs.
Levers: Levers are available in forged brass or bronze and cast
stainless steel. Designs available to match D-Series levers.
93 Lever Design: Extruded brass, bronze or stainless steel.
Mediterranean Designs: Forged brass lever and rose designs.
Escutcheons: L escutcheons are cold forged brass or bronze and
stainless steel. N escutcheons are heavy wrought reinforced brass,
bronze and stainless steel. L = 8x 1³⁄₄ x ⁷⁄₁₆ (203mm x 44mm
x 11mm). N = 8x 2⁹⁄₁₆ x ⁷⁄₁₆ (203mm x 65mm x 11mm).
Roses: A = 2¹⁄₈ (54mm) diameter wrought brass, bronze or
stainless steel.
B = 2⁹⁄₁₆ (65mm) diameter wrought brass, bronze or
stainless steel.
Trim Combinations: Available with knob both sides, lever both
sides, or knob x lever with rose or escutcheon both sides.
Keying: 6-pin cylinder with two nickel silver Everest
patented keys standard. Keying options available from factory
are master keying, construction keying, interchangeable core,
SFIC and Primus® high security cylinders.
Door Range: 1³⁄₄ (44mm) Standard. 1³⁄(35mm) to 2¹⁄
(64mm) Regular parts assembled to order. Over 2¹⁄ (64mm)
door ranges vary by function. N escutcheon available for 1³⁄₄
(44mm) doors standard. 2(51mm) to 2³⁄(60mm) Regular
parts assembled to order. Specify door thickness if other than
1³⁄₄.
Case Size: 4⁷⁄₁₆ x 6¹⁄₁₆ x 1 (113mm x 154mm x 25mm).
Armored Front: 1¹⁄₄ x 8x ⁷⁄₃₂ (32mm x 203mm x 6mm)
Standard. 1¹⁄₁₆ x 8x ⁷⁄₃₂ (27mm x 203mm x 6mm) Optional.
Spacing: Knob or lever to cylinder, 3⁷⁄₈ (98mm); knob or
lever to thumbturn hub, 2¹¹⁄₁₆ (68mm).
Deadbolt: 1(25mm) Throw stainless steel.
Latchbolt: ³⁄₄ (19mm) Throw stainless steel with anti-friction
tongue.
Backset: 2³⁄₄ (70mm) Only.
1
SERIES
L

2
SERIES
L
Performance Features
Exceeds ANSI A156.13 Grade 1 lever torque requirements.
Exceeds 800,000 cycle ANSI Grade 1 requirements.
Grade 1 security with concealed mortise cylinder.
Grade 2 security with full face mortise cylinder.
U.L. Listed for all functions except L9076 and L9077 for 3-hour doors, single fire-rated doors
not exceeding four feet in width and ten feet in height.
Universal lock chassis, one lock case for knobs or levers.
Replaceable breakaway spindle is designed to resist excessive force from vandalism,
preventing damage to lever trim and internal lock case components.
Solid stainless steel 1¹⁄₂ (38mm) deadbolt, 1(25mm) projected.
Heavy duty ³⁄₄ (19mm) latchbolt with anti-friction tongue standard.
Hand is quickly reversible without opening lock case.
Door Preparation
Deeper cylinder retainer groove
in cylinder shell increases security
against wrenching and pullout.
All cylinders backward compatible.
High strength steel alloy
cylinder retainer
Armor front
Brass, bronze or
stainless steel
Adjustable for door bevel
1” (25mm) throw
deadbolt
Stainless steel
Captured cylinder
set screw for easier
cylinder mounting
Non-handed
auxiliary latch
Full 3/4” (19mm)
latchbolt
Standard
Heavy duty
anti-friction tongue
Standard Fusible link built into lockcase
Standard
Stopworks operates
by thumbturn.
Steel case and parts
corrosion protected
Trim applied by threaded bushing
No exposed screws
Cutaway View
See templates.
Note: L-Series mortise locks meet
all requirements for installation
in doors and frames prepared in
accordance with ANSI 115.1.
6 Pin Everest Cylinder with
patented keys standard

Lever Designs & Finishes
3
SERIES
L
01
Material: Forged brass and
cast stainless steel
Finishes: 625, 626, 630
02
Material: Forged brass and
cast stainless steel
Finishes: 625, 626, 630
03
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
05
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 625, 626, 630
06 (D Rhodes)
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
07 (D Athens)
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
12
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
Specify door hand
93
Material: Extruded brass,
bronze, or stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
17 (D Sparta)
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
613
625
625
612
611
605
625
625
626
2-11/16"
64mm
96mm
3-7/8"
2-15/16"
75 mm
4-3/4"
121 mm
4-3/4"
121mm
3"
76mm
13mm
1/2"
2-7/8"
73mm
3-3/4"
95mm
2-3/4"
73mm
13mm
1/2"
4-5/8"
117mm
2-7/8"
75mm
4-5/8"
117mm
3-5/8"
92mm
4-5/8"
117mm
13mm
1/2"
3-1/4"
76mm
5"
127mm
3"
76mm
13mm
1/2"
4-3/4"
121mm
18
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
605
2-5/8"
4-7/8"
124 mm
67 mm

4
SERIES
L
Knob Designs & Finishes
41 (D PLYMOUTH)
Material: Heavy wrought
brass, bronze, or stainless steel
Finishes: 605, 606, 612,
613, 625, 626, 629, 630
612
2-3/4"
73mm
2-1/4"
57mm
42 (D ORBIT)
Material: Heavy wrought
brass, bronze, or stainless steel
Finishes: 605, 606, 612,
613, 625, 626, 629, 630
2-3/4"
73mm
2-1/8"
54mm
626
Finishes
605 Bright Brass
606 Satin Brass
610 Bright Brass, Blackened
612 Satin Bronze
613 Oil Rubbed Bronze
625 Bright Chromium Plated
626 Satin Chromium Plated
629 Bright Stainless Steel
630 Satin Stainless Steel

5
SERIES
L
Mediterranean Designs & Finishes
ASTI
Symbol: AST
Material: solid forged brass
Finishes: 605, 625
MERANO
Symbol: MER
Material: Solid forged brass
Finishes: 605, 625
505
625
2-5/8"
66 mm
2-9/16"
65 mm
4"
102 mm
2-5/8"
66 mm 3-1/16"
78 mm
4"
102 mm
This product offering combines the beauty of Schlage’s
Mediterranean levers with all the features and benefits of
our L-Series heavy duty commercial mortise lock.
Two designs, Asti and Merano, are offered in two finishes.
The L escutcheon is also available in addition to the special
roses shown below.
All exposed trim is forged of solid brass and available in our
bright brass finish or our high quality bright chrome finish.
We offer you the added benefit of our extended warranty of
10 years for commercial applications and a lifetime warranty
for Residential applications.
Finishes
605 Bright Brass
625 Bright Chromium Plated

6
SERIES
L
Escutcheons, Roses, Special Turns & Finishes
Finishes
605 Bright Brass
606 Satin Brass
612 Satin Bronze
613 Oil Rubbed Bronze
625 Bright Chromium Plated
626 Satin Chromium Plated
629 Bright Stainless Steel
630 Satin Stainless Steel
L FULL FACE
Material: Cold forged brass,
bronze, or stainless steel
Finishes: 605, 606,
612, 613, 625,
626, 629, 630
8x 1³⁄₄ x ⁷⁄₁₆
(203mm x 44mm x 11mm)
A-WROUGHT ROSE
2¹⁄₈ (54mm) Diameter
Available for use on L-Series
knob and lever designs. Order by
letter designation corresponding
to the design and diameter
desired.
626
611
625
L CONCEALED
Material: Cold forged brass,
bronze, or stainless steel
Finishes: 605, 606,
612, 613, 625,
626, 629, 630
8x 1³⁄₄ x ⁷⁄₁₆
(203mm x 44mm x 11mm)
625
B-WROUGHT ROSE
2⁹⁄₁₆ (65mm) Diameter
Available for use on L-Series
knob and lever designs.
Order by letter designation
corresponding to the design
and diameter desired.
N ESCUTCHEON
Material: Heavy wrought
reinforced brass, bronze,
or stainless steel
Finishes: 605, 606,
612, 613, 625,
626, 629, 630
8x 2⁹⁄₁₆ x ⁷⁄₁₆
(203mm x 65mm x 11mm)
626
7/16"
11mm
8"
203mm
7/16"
11mm
8"
203mm
7/16"
11mm
8"
203mm
HOTEL OCCUPANCY
INDICATOR
09-611
For lock function L9486P, this
unit is used with A or B design
roses only. It requires a
1³⁄₈ (35mm) cylinder for 1³⁄₄
(44mm) doors. When ordering
separately, specify finish.
OPTIONAL “EZ” TURN
L583-363
Available for rose and
escutcheon trim. Disability
turn (ADA) option to standard
thumbturn. Can be used with
any thumbturn function
L-Series lock, except L9463
and L463. Specify lock per
L583-363 when ordering.
625
625
COIN TURN L283-124
For lock functions L9044 and
L9444 with rose trim.
When ordering separately,
specify 09-509 and finish per
L283-124.
625

7
SERIES
L
Functions
Stopworks functions
By turn piece
Latchbolt
With anti-friction
tongue
Deadbolt
Auxiliary
guarded latch
Symbols
Cylinder
Outside knob or lever
Inside knob or lever
Thumbturn
Thumbturn Cylinder
Coin turn
Solid spindle
Two piece spindle
Emergency turn piece
Occupancy indicator
DONOTDISTURB
Features
Product Identification
L 9 4 53 P
Cylinder Suffix
P=6-Pin Full Face Mortise
Cylinder with Schlage Logo*
L=Less Full Face Cylinder
C=C oncealed Mortise Cylinder
W=Less Concealed Cylinder
R =Full Size Interchangeable
Core with Schlage Logo
J=Less Full Size
Interchangeable Core
F=Full Size Interchangeable
Core Less Schlage Logo
T= Full Size Construction Core
BD =SFIC Less Core
BDC =Disposable SFIC
GD =Everest®Patented SFIC
HD =Construction SFIC
Function
0= No Deadbolt
1= Dummy Trim
4= With Deadbolt
0 = Dummy Trim without Lock Case
9= Functions with Lock Case
Lock Series
* To order less Schlage logo specify lock “with K510-612 faceplate”.
SFIC = Small Format (Best®Style) Interchangeable Core

L•Functions
ANSI A156.13, Series 1000
SCHLAGE ANSI
Mortise Locks—Non-Keyed
L9010 F01 Passage Latch
Latchbolt retracted by knob/lever
from either side at all times.
SCHLAGE ANSI
Mortise Locks—Non-Keyed Dummy
L0172 Double Dummy Trim
Knob/lever on both sides fixed by
mounting bar.
L9175 Single Dummy w/ Lock Case
Knob/lever on one side inoperable.
Includes lock case and armor front.
L9176 Double Dummy w/ Lock Case
Knob/lever on both sides inoperable.
Includes lock case and armor front.
L9040 F22 Bath/Bedroom Privacy Lock
Latchbolt retracted by knob/lever
from either side unless outside is
locked by inside thumbturn. Turning
inside knob/lever or closing door
unlocks outside knob/lever. To unlock
from outside, remove emergency
button, insert emergency turn
(furnished) in access hole and rotate.
L9044 Privacy With Coin Turn Outside
Latchbolt retracted by knob/lever
from either side unless outside is
locked by inside thumbturn or outside
coin turn. Operating inside knob/
lever, closing door, rotating inside
thumbturn or rotating outside coin
turn unlocks outside knob/lever.
Specify per L283-056 for Torx
screws. Available with rose trim only.
(Previously XL11-868)
L9440 Privacy With Deadbolt
Latchbolt retracted by knob/lever
from either side. Deadbolt thrown or
retracted by inside thumbturn.
Throwing deadbolt locks outside
knob/lever. Rotating inside knob/lever
simultaneously retracts deadbolt and
latchbolt, and unlocks outside knob/
lever. To unlock from outside, remove
emergency button, insert emergency
thumbturn in access hole and rotate.
(Previously XL11-761)
L9444 Privacy With Deadbolt and Coin
Turn Outside
Latchbolt retracted by knob/lever
from either side. Deadbolt thrown or
retracted by inside thumbturn or
outside coin turn. Throwing deadbolt
locks outside knob/lever. Rotating
inside knob/lever simultaneously
retracts deadbolt and latchbolt, and
unlocks outside knob/lever. Rotating
outside coin turn retracts deadbolt and
unlocks outside knob/lever. Specify
per L283-056 for Torx screws.
Available with rose trim only.
(Previously XL11-868)
L0170 Single Dummy Trim
Knob/lever on one side fixed by
mounting bar.
8

Functions •L
L9050 F04 Office and Inner Entry Lock
Latchbolt retracted by knob/lever from
either side unless outside is made
inoperative by key outside or by turning
inside thumbturn. When outside is locked,
latchbolt is retracted by key outside or by
knob/lever inside. Outside knob/lever
remains locked until thumbturn is returned
to vertical or unlocked by key. Auxiliary
latch deadlocks latchbolt when door is
closed.
L9056
L9050 With Simultaneous Retraction
Latchbolt retracted by knob/lever from
either side unless outside is made
inoperative by key outside or by rotating
inside thumbturn. Outside knob/lever
unlocked by key outside, thumbturn, or
closing door. Rotating inside knob/lever
simultaneously retracts latchbolt and
unlocks outside knob/lever. Auxiliary
latch deadlocks latchbolt when door is
closed. (Previously XL11-776)
L9060 F09 Apartment Entrance Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by
key from inside. When locked, latchbolt
retracted by key outside or knob/lever
inside. Auxiliary latch deadlocks
latchbolt when door is closed.
L9070 F05 Classroom Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by
key. Unlocked from outside by key.
Inside knob/lever always free for
immediate exit. Auxiliary latch
deadlocks latchbolt when door is closed.
L9071 Classroom Security Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by
key from either side. When locked,
latchbolt retracted by key outside or
knob/lever inside. Auxiliary latch
deadlocks latchbolt when door is locked.
L9076 F06 Classroom Holdback Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by
key. When locked, latchbolt retracted by
key outside or knob/lever inside.
Auxiliary latch deadlocks latchbolt when
door is closed. Depress inside knob/lever
and turn key 360º for holdback feature.
L9077
Classroom Security Holdback Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by
key from either side. When locked,
latchbolt retracted by key outside or
knob/lever inside. Auxiliary latch
deadlocks latchbolt when door is locked.
Depress inside knob/lever and turn key
360º for holdback feature.
L9080 F07
Storeroom Lock
Latchbolt retracted by key outside or by
knob/lever inside. Outside knob/lever
always inoperative. Auxiliary latch
deadlocks latchbolt when door is closed.
L9080EL Electrically Locked (Fail Safe)
Outside knob/lever continuously locked
by 24V AC or DC. Latchbolt retracted
by key outside or by knob/lever inside.
Switch or power failure allows outside
knob/lever to retract latchbolt. Auxiliary
latch deadlocks latchbolt when door is
closed. Inside knob/lever always free for
immediate exit.
SCHLAGE ANSI
Mortise Locks—Keyed
SCHLAGE ANSI
Mortise Locks—Keyed
L9080EU Electrically Unlocked (Fail Secure)
Outside knob/lever unlocked by 24V
AC or DC. Latchbolt retracted by key
outside or knob/lever inside. Auxiliary
latch deadlocks latchbolt when door is
closed. Inside knob/lever always free
for immediate exit.
9

L•Functions
SCHLAGE ANSI
Mortise Locks—Keyed
SCHLAGE ANSI
Mortise Locks—Keyed
L9082 Institution Lock*
Latchbolt retracted by key from either
side. Knob/lever on both sides always
inoperative. Auxiliary latch deadlocks
latchbolt when door is closed.
L9453 F20 Entrance Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by 20°
rotation of thumbturn. Deadbolt thrown or
retracted by 90° rotation of thumbturn.
When locked, key outside or knob/lever
inside retracts deadbolt and latchbolt
simultaneously. Outside knob/lever
remains locked until thumbturn is restored
to vertical position. Throwing deadbolt
automatically locks outside knob/lever.
Auxiliary latch deadlocks latchbolt when
door is closed.
L9456 F13 Corridor Lock
Latchbolt retracted by knob/lever from
either side. Deadbolt thrown or retracted
by key outside or inside thumbturn.
Throwing deadbolt locks outside
knob/lever. Turning inside knob/lever
simultaneously retracts deadbolt and
latchbolt and unlocks outside knob/lever.
L9457 Classroom Security Lock
Latchbolt retracted by knob/lever from
either side. Deadbolt thrown or retracted
by key from either side. Throwing
deadbolt locks outside knob/lever.
Turning inside knob/lever simultaneously
retracts deadbolt and latchbolt and unlocks
outside knob/lever.
L9465 Closet/Storeroom Lock
Latchbolt retracted by knob/lever from
either side. Deadbolt thrown or retracted
by key outside.
L9466 F14 Store/Utility Room Lock*
Latchbolt retracted by knob/lever from
either side. Deadbolt thrown or retracted
by key from either side.
L9473 F21 Dormitory/Bedroom Lock
Latchbolt retracted by knob/lever from
either side. Deadbolt thrown or retracted
by key outside or thumbturn inside.
* Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
L9080EL-RX
L9080EU-RX Request To Exit (RX) Electrified
Lock
Same as L9080EL and L9080EU
functions. In addition, a micro switch
positioned inside the lock case
monitors the retractor crank, and is
actuated when rotation of the inside or
outside knob/lever rotates the retractor
hub. The switch signals the use of that
opening to security systems, allowing
a non-disruptive means of immediate
egress. Specify per L283-059 for
normally closed contacts (default).
Specify L283-125 for normally open
contacts. (Previously XL11-807)
L9082EL
L9082EU L9082 Electrically Locked or
Electrically Unlocked Both Sides*
EL: Outside and inside knob or lever
continually locked electrically.
Latchbolt retracted by key either side.
Switch or power failure allows outside
and inside knob/lever to retract
latchbolt. Auxiliary latch deadlocks
latchbolt when door is closed.
EU: Outside and inside knob/lever
unlocked electrically. Latchbolt
retracted by key either side. Switch or
power failure keeps inside and outside
knob/lever locked. Auxiliary latch
deadlocks latchbolt when door is
closed. (Previously XL11-452)
10

Functions •L
SCHLAGE ANSI
Mortise Locks—Keyed
SCHLAGE ANSI
Mortise Locks—Keyed
L9480 Storeroom Lock With Deadbolt
Latchbolt retracted by key outside or by
lever or knob inside. Outside knob/lever
always fixed. Deadbolt thrown or
retracted by key outside or thumbturn
inside. Turning inside knob/lever
simultaneously retracts both deadbolt
and latchbolt. Auxiliary latch deadlocks
latchbolt when door is closed.
(Previously XL11-591)
L9485 Hotel Lock
Latchbolt retracted by key outside or by
knob/lever inside. Outside knob/lever
always fixed. Deadbolt thrown or
retracted by inside thumbturn. When
deadbolt is thrown, all keys become
inoperative except emergency or display
keys. Turning inside knob/lever retracts
both deadbolt and latchbolt simultaneously.
Auxiliary latch deadlocks latchbolt when
door is closed.
DO NOT DISTURB
L9486 F15 Hotel Lock w/ “Do Not Disturb”
Indicator
Latchbolt retracted by key outside or by
knob/lever inside. Outside knob/lever
always fixed. Deadbolt thrown or retracted
by inside thumbturn. When deadbolt is
thrown, “DO NOT DISTURB” plate is
displayed. All keys become inoperative
except emergency or display keys. Turning
inside knob/lever retracts both deadbolt and
latchbolt simultaneously. Auxiliary latch
deadlocks latchbolt when door is closed.
OCCUPIED
L9486 L9486 With “OCCUPIED” Indicator
Latchbolt retracted by key outside or by
knob/lever inside. Outside knob/lever
always fixed. Deadbolt thrown or retracted
by inside thumbturn. When deadbolt is
thrown, “OCCUPIED” plate is displayed
and all keys become inoperative except
emergency keys. Turning inside knob/lever
simultaneously retracts both deadbolt and
latchbolt. Auxiliary latch deadlocks latchbolt
when door is closed. Specify per L583-375.
(Previously XL11-580)
OCCUPIED
L9496
Privacy With “OCCUPIED”
Indicator
Knob/lever retracts latchbolt from either
side. Deadbolt thrown or retracted by
key outside (retraction by key required
in the event of an emergency) or inside
thumbturn. Throwing deadbolt locks
outside knob/lever and displays
“OCCUPIED” plate. Rotating inside
knob/lever simultaneously retracts
both deadbolt and latchbolt and unlocks
outside knob/lever.
(Previously XL11-885)
11

L•Functions
SCHLAGE ANSI
Mortise Locks—Keyed Deadlocks
ANSI A156.5
SCHLAGE ANSI
Mortise Locks—Small Case Deadlocks
L9460 F17 Cylinder x Thumbturn Lock
Deadbolt thrown or retracted by key
outside or thumbturn inside.
L460 E06071 Cylinder x Thumbturn Lock
Deadbolt thrown or retracted by key
outside or thumbturn inside.
L462 E06061 Double Cylinder Lock*
Deadbolt operated by key from either
side.
L463 E06091 Classroom Lock
Deadbolt thrown or retracted by key
from outside. Inside thumbturn cylinder
retracts deadbolt but cannot project it.
L464 E06081 Cylinder Lock
Deadbolt thrown or retracted by key
from one side. No trim on opposite side.
L480 Door Bolt
Deadbolt thrown or retracted by
thumbturn from one side. No trim on
opposite side.
OCCUPIED
L496 Deadbolt With “OCCUPIED”
Indicator
Deadbolt thrown or retracted by
key outside or thumbturn inside.
When deadbolt is thrown
“OCCUPIED” plate is displayed.
(Previously XL11-911)
L9462 F16 Double Cylinder Lock*
Deadbolt operated by key from either
side.
L9463 Classroom Lock
Deadbolt thrown or retracted by key
from outside. Inside thumbturn cylinder
retracts deadbolt but cannot project it.
L9464 F18 Cylinder Lock
Deadbolt thrown or retracted by key
from one side. No trim on opposite
side.
* Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
12

Functions •L
SCHLAGE
Special Functions
SCHLAGE
Special Functions
L9110 Double Dummy With Active Trim
Knob/lever both sides always active.
Includes lock case and armor front.
Specify per XL11-741. May be
ordered with optional XL11-743
armored front with cutout to receive
deadbolt only.
L9482 Institution Lock With Deadbolt*
Latchbolt retracted by key from either
side. Knob/lever on both sides always
inoperative. Deadbolt thrown or
retraced by key either side. Auxiliary
latch deadlocks latchbolt when door is
closed. Specify per XL11-543.
L9040 Privacy With Turns Both Sides
Latchbolt retracted by knob/lever
from either side unless outside is
locked by inside or outside
thumbturn. Operating inside knob/
lever, closing door or rotating either
thumbturn unlocks outside knob/lever.
Specify per XL11-446.
L9460 L9460 With Fixed Dummy Trim
Knob/lever both sides fixed. Deadbolt
thrown or retracted by key outside or
thumbturn inside. Specify per
XL11-635.
L9460, L9462, L9464 Deadbolt With Retraction By
Inside Lever or Knob
L9460: Deadbolt thrown or retracted
by key outside or thumbturn inside.
Outside knob/lever always fixed.
Inside knob/lever active when
deadbolt is retracted. Rotating inside
knob/lever will retract deadbolt.
L9462: Same as above, except
deadbolt thrown or retracted by key
from either side.
L9464 (shown): Same as above,
except deadbolt thrown or retracted by
key from one side. Specify desired
function per XL11-886.
L9485 Prison Function Lock
Latch retracted by key outside or knob
inside. Outside knob always free
spinning. Deadbolt only thrown or
retracted by guard’s key. Inside knob
becomes fixed when deadbolt is
thrown. Prisoner’s key only retracts
latchbolt. Furnished standard with
tamper resistant Torx screws. Specify
per XL11-557.
* Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
13

14
SERIES
L
P
R
I
M
U
S
Standard Cylinders
Schlage®locks are provided with cylinders precision built to
extremely close tolerances and the highest standards of accuracy.
Using only solid brass bar stock plugs and shells, phosphor bronze
springs, nickel silver keys and bottom pins, ensures long life and
ease of operation.
6-pin Everest cylinders in C123 keyway with two patented keys are
standard for stock. C145 is standard for new master key systems.
Primus®High Security Cylinders
Primus high security cylinders are available to add patented key
control and varying degrees of geographical exclusivity to most
Schlage 6-pin key systems, whether Everest or Classic keyways.
In addition to a conventional pin tumbler mechanism, Primus
cylinders incorporate a patented finger pin and sidebar design
providing a “dual-locking” cylinder that is virtually pick-proof.
Resistance to drilling and other physical attack is optional by
specifying 20-500 Series UL437 Listed cylinders.
Primus®Lockout Cylinders
For doors where it is frequently desirable to disable all keys
from operating the lock temporarily, use lockout cylinders.
The special lockout key can be removed while the plug is turned
to the 11 o’clock position, preventing all normal operating keys,
including master keys, from fully entering the cylinder.
Suggested applications for lockout cylinders include laboratories,
dark rooms, clean rooms, and exterior doors to dormitories.
Schlage will not master key lockout cylinders.
P
R
I
M
U
S

Primus
Primus Primus UL437
Design Function Conventional Primus UL437 Lockout Lockout
All Except Below 30-021 20-793 20-593 20-717** 20-517**
L9060 Outside 26-021 20-701 20-501 20-715** 20-515**
L9485, L9486 30-022* N/A N/A N/A N/A
Hotel Functions
All Except Below 30-004 20-789 20-589 N/A N/A
L9060 Outside 26-023 N/A N/A N/A N/A
L9485, L9486 30-005* N/A N/A N/A N/A
Hotel Functions
All Except Below 30-001 20-787 20-587 20-717 20-517
L9060 Outside 20-001 20-700 20-500 20-715 20-515
L9485, L9486 30-002* N/A N/A N/A N/A
Hotel Functions
15
SERIES
L
Standard (Non-IC) Mortise Cylinders
Cylinder Mechanism
* Specify door hand for hotel function cylinders.
** Discard compression ring for Lockout cylinders with escutcheon trim.
Cylinder Only Compr. Ring & Spring
Finishes: 605, 606, 611, 612, 613, 625, 626, 629, and 630.
Concealed shell cylinders available 606 and 626 only.
6-pin Everest C123 keyway standard for stock cylinders. C145 standard for new key systems.
Standard cylinder lengths: sectional (rose) trim = 11/8˝ (29mm), escutcheon trim = 11/4” (32mm).
Optional cylinder lengths are in 1/8˝ (4mm) increments ranging from 11/8˝ to 13/4” (29mm to 44mm).
Standard (Non-IC) Cylinders
L&N
Escutcheons
(cylinders and
spring only)
L Escutcheon
with concealed
shell cylinder
(C suffix)
Sectional Trim
(cylinder with
compression ring
& spring)

16
SERIES
L
To order Schlage L-Series mortise locks with full size IC
cylinders, change suffix Pto R; example: L9453R.
To order interchangeable core locks less core, change suffix to J;
To order locks with full size construction core, change suffix to T.
Full Size Interchangeable Core Cylinders
Schlage®figure-8 interchangeable core (IC) cylinders allow
immediate rekeying at the door simply by using the special
control key to replace the core in seconds.
Full size IC cylinders can be integrated into any existing 5 or
6-pin Schlage key system with no adverse effects on keying
capacity. Convert existing mortise locks to interchangeable
core merely by replacing the old cylinder with the IC cylinder
and proper collar(s).
* Hotel function cores are handed. Specify hand of door.
Finishes: 605, 606, 611, 612, 613, 625, and 626. Standard cylinder length: 11/2˝
Housing
Design Function Conventional Primus Less Core
All Except Below 30-008 20-798 30-007
L9060 Outside 30-030 20-782 30-032 + 36-083
L9485, L9486 30-010* N/A 30-007
Hotel Functions
All Except Below 30-138 20-776 30-137
L9060 Outside 20-061 20-783 30-032 + 36-083 +
35-082-037
L9485, L9486 30-140* N/A 30-137
Hotel Functions
Core Mechanism
L&N
Escutcheons
(cylinders with
compression ring)
Sectional Trim
(cylinder with
compression ring,
spring and
3/8˝ blocking ring)
Full Size Interchangeable Cores Only
Available 606 and 626 finish only.
Standard keyway: 6-pin Everest C123 for stock, C145 for new master key systems.
Number Description
23-030 Conventional core
20-740 Primus high security core
30-120 Hotel function core (Specify hand of door.)
Full Size IC Mortise Cylinders

17
SERIES
L
To order Schlage L-Series mortise locks with SFIC cylinders less
core, change suffix Pto BD. Example: L9453BD. To order locks
with Everest B Family restricted keyway cores, change suffix to
GD. To order with keyed construction cores, change suffix to HD.
To order with disposable construction cores, change suffix to BDC.
Small Format Interchangeable Core (SFIC) Cylinders
Number Description
80-036 7-Pin uncombinated Everest B Family restricted keyways
80-037 7-Pin combinated Everest B Family restricted keyways
80-043 6-pin uncombinated Falcon / Best keyways
80-033 7-pin uncombinated Falcon / Best keyways
Small Format Interchangeable Core Only
Available 606 and 626 finish only. Specify keyway for existing systems.
80-033 and 80-043 cores are available in A, D, E, F, G, H, J, K, L, and M keyways.
Schlage assigns the keyway when establishing new Everest restricted key systems.
The L-Series lockset can be ordered to accept small format
interchangeable cores (SFIC) compatible with Falcon, Arrow,
Best, etc. and cams are easily changeable.
* L9485 and L9486 hotel functions are not available with small format IC cylinders
Finishes: 605, 606, 611, 612, 613, 625, and 626.
Standard cylinder length is 13/8˝
Everest Keyed Disposable Housing
Restricted Construction Construction Less Core
Design Function (GD Suffix) (HD Suffix) (BDC Suffix) (BD Suffix)
All* except
L9060 Outside 80-308 80-138 80-115 80-108
L9060 Outside 80-304 80-134 80-112 80-104
All* except 80-301 80-131 80-109 80-101
L9060 Outside
L9060 Outside 80-304 + 80-134 + 80-112 + 80-104 +
36-082-025 36-082-025 36-082-025 36-082-025
Small Format Interchangeable Core Cylinders
Core Mechanism
L&N
Escutcheons
(cylinders with
compression ring
and spring)
Sectional Trim
(Cylinder with
compression ring,
spring, and 1/4˝
blocking ring)

18
SERIES
L
IC Installation Tool
L400 and L9000 Series
Except L9060 Outside
L9060 Outside Only
M504-413 (Order as needed)
This tool is used to install and remove mortise cylinder housings
and test mortise cylinder cam action for both small format and
full size interchangeable core cylinders. Its other ends are
designed to install the driver and retainer for full size IC in
AL-Series, D-Series and other Schlage cylindrical locksets.
Mortise Cylinder Cams
Cam Screws
B502-942 Everest and Primus (non-IC)
B502-468 Classic conventional (non-IC)
L583-333 All full size interchangeable core
B520-484 All small format interchangeable core
L583-153
Everest &
Primus
L583-255
All IC
L583-254
Classic
Conventional
B502-948
Everest &
Primus
K510-680
All IC
B502-191
Classic
Conventional