SM300 - SM500 - ESM500
Surface mount Electromagnetic locks
PRODUCT CUT SHEET
FEATURES
Holding force:
SM300: 660 lbs (300kg) and ESM500 & SM500 : 1200 lbs (500kg)
No residual magnetism.
to eliminate back EMF
Electromagnetic lock dimensions (L x W x D):
- SM300 series = 10 x 1.7 x 1 in. (250 x 42.5 x 26mm).
- SM500 series = 10.45 x 2.7 x 1.65 in. (265 x 67 x 41mm).
- ESM500 = 9 x 2.5 x 1.65 in. (230 x 63 x 40mm).
Armature dimensions (L x W x D):
- SM300 = 7.1 x 1.5 x .5 in. (180 x 38 x 12mm).
- SM500 = 7.3 x 2.5 x .65 in. (185 x 61.5 x 16mm).
- ESM500 = 7.3 x 2.5 x .5 in. (185 x 61 x 12mm).
Input voltage: 12/24V dc
Power consumption:
- 500mA @ 12 V DC
- 250mA @ 24 V DC EC certication
WEEE
IP42
RoHS
SM300 &
SM500.
ESM500
ELECTRICAL CONNECTIONS
The NO/NC signal only
switches when the door is
closed and with the
maglock power on.
Terminal
block Correspondence
+12 (Default) or 24V dc
-- 0 V
N.C NC (Normally closed)
COM COM
N.O NO (Normally open)
VOLTAGE INPUT
JUMPER SETTING
Check the jumper position before connecting the lock to the input current. A
wrong position could damage the lock. This type of damage is not covered
by the warranty. Make sure that the magnet and the armature
meet evenly
over their entire mating surfaces.
12V dc
(Default) 24V dc
