Scosche IPFMRDS User manual

ON 1 2
ON
1 2
OFF

1. Make sure that the radio code is available before disconnecting battery. (applies
to Anti-theft radios only). Disconnect Negative battery terminal.
2. Remove the radio.
3. Access the antenna connections at the back of the radio. Unplug the Factory
antenna cable and connect to the ”Female” Antenna “IN” cable of the IPFMRDS.
NOTE: Some vehicles do not have standard antenna connections and require the
use of Male/Female Antenna adapters. Adapters are sold separately. Consult
Tech support if your antenna connection differs from the IPFMRDS plugs.
4. Connect the “Male” Antenna “OUT” cable coming from the IPFMRDS to your radio’s
antenna location.
5. Connect the Power, Ignition and Ground wires of the IPFMRDS power cable. Call
Tech Support if you need assistance with Factory wires colors and/or locations.
iPod
USB Upgrade
port
Power Cable
IPFMRDS Module
Antenna OUT
(to Radio)
Antenna IN
(to Car Ant.)
iPod Cable
Frequency
Selector
Yellow
(+12V constant)
Black
(Ground)
Red
(+12V ignition)
DIAGRAMS:
Not Used
MENU
IPFMRDS Module
SCOSCHE STEREO INSTALLATION COMPONENTS STEREO DASH KITS