Scotchman CPO-315-RFA-BL User manual

You have downloaded
a manual for our
MODEL CPO-315-RFA-BL
BUNDLE LOADER
ATTACHMENT
Please read this manual
before use.

www.scotchman.com
PRINTED JANUARY 2022
SCOTCHMAN INDS. - 180 E US HWY 14 - PO BOX 850 - PHILIP, SD 57567 Call: 1-605-859-2542
MODEL
CPO-315-RFA-BL
BUNDLE LOADER
ATTACHMENT

Page 2
TABLE OF CONTENTS
SECTION DESCRIPTION PAGE #
1.0 INTRODUCTION 3
2.0 ELECTRICAL 4
3.0 SET-UP 5-8
3.1 Control Panel Functions 5
3.2 Stroke Control Setting 6
3.3 Supply Table Set-Up 7
3.4 Capacities 8
4.0 MAINTENANCE 8
5.0 TROUBLE SHOOTING 8-9
5.1 LED Lights 9
6.0 PARTS LISTS 10-24
6.1 Stroke Control 10
6.2 Strap Rollers 12
6.3 Material Feed Belts 14
6.4 Drive Assembly 16
6.5 Frame Assembly 18
6.6 Guide Assembly 20
6.7 Electrical Unit 22
7.0 WIRING DIAGRAM 24

Page 3
1.0 INTRODUCTION
THE BUNDLE LOADING ATTACHMENT IS AN OPTION THAT ALLOWS THE LOADING OF
COMPLETE BUNDLES ON THE SCOTCHMAN MODEL CPO-315-RFA COLD SAW. PLEASE
READ ALL SECTIONS OF THIS MANUAL BEFORE USING THIS ATTACHMENT.
FIGURE 1

Page 4
2.0 ELECTRICAL
This unit has its own self contained electrical panel.
It does not need to be connected to the saw's power supply to operate.
The motor on this attachment is 3/4 horsepower, 3 phase and draws 1.3 amps when wired for 230 volts
and .85 amps when wired for 460 volt.
THE WIRING DIAGRAM IS IN SECTION 7.0 ON PAGE 26.
Connect the incoming power to the main disconnect switch (A) in the control panel.
Upstream protection for the motor must be provided by the user of the machine.
If the machine was not ordered for the right voltage, the attachment can be converted by rewiring the
motor and changing the primary leads on the transformer.