Screen Int B-24 User manual

INSTALLATION MANUAL PROJECTOR ARM B-24
STEP 1 STEP 2
STEP 3
A
B
C D
E
J
FK
L
G
H
I
- 01 ceiling mounting plate
First of all congratulations
for your choice.
We are pleased to showcase
you this universal video
projector ceiling bracket,
which is easy to install and can
be used for nearly all LCD and
DLP projectors up to 15 Kg.
Before you install the ceiling
bracket, read all instructions
carefully and follow the
installation procedures step by
step.
Inside the packaging you
will find the following
items:
Take items (A), (E), (C) and
(G) like in fig. 2. Mount
(A), (C) and (E) using the 2
screws (G).
In case you would like not
to use the column, please
follow the instructions
under Step 1/B at page 2.
Take items (B) and (D)
and join them with two
screws (I), like on Fig.
3.
Join the mounting plates using the socket head screws (H), in
order to create the spider system (Fig. 6) that will enable you to
fix the bracket to the projector.
NOTE: You will find 4 straight plates and 4 “S” form plates (convex
shape).
First you should mount the straight plates to (B) and afterwards
you can proceed with the “S” form plates.
In order to mount correctly the “S”form plates, the convex part of
the S” should result downwards (see Fig. 5).
- 01 plate for central joint
- 01 central joint
Fig. 3
Fig. 2
Fig. 5Fig. 4 Fig. 6
- 08 mounting plates for the
spider system - measures:
85x23 mm.
(LxW)
- 02 socket head screws
6x16 mm.
- 08 socket head screws
5x6 mm.
- 04 knurled socket head
screws 6x10 mm.
- 01 flanged nut M6
- 01 column 248 mm. long
- 04 washers
- 04 crowned head screws
3x10 mm. (diameter x length)
- 04 crowned head screws
4x10 mm. (diameter x length)
- 04 crowned head screws
5x10 mm. (diameter x length)
+
A
B
D
H
I
E
G
C

STEP 1/B STEP 4
STEP 5
Mount the spider system on the projector using the
supplied crowned head screws (J)
See Fig. 7 and 8.
Take plate with column
and mount them on the
ceiling using suitable
screws (not included in
the packaging).
After that, you can join
projector with spider
system to the fixed plate
and column, using the
remaining two screws (I).
1) Before installing the bracket, check that you have assembled it correctly
according to all the mentioned steps.
2) Check that the ceiling is suitable to fix and support the weight of the bracket
and the projector.
3) Maximum projector weight you can install with Projector Arm B-24 is 15 Kg.
4) In case some of the parts inside the packaging are missing, do not
use alternative components in order to fix the projector but contact
immediately your dealer.
5) In case the instructions are not clear or if you have any doubt how to
assemble the bracket, please contact your dealer.
6) After the installation, please keep all parts not used for a next installation.
WARNING
Fig. 8Fig. 7
Take (A) and (C) and screw them together using one
socket head screw (G) and a flanged nut M6 (K).
A
C