Screen Int T-MEDIUM User manual

INSTALLATION MANUAL T-MEDIUM AND T- LONG BRACKET
STEP 1
STEP 3
STEP 2
A
B
C
D
G
E
F
- 01 extendable column variable from
51 to 75. (T-Medium bracket).
or extendable column variable from
69 to 112,5 cm. (T-Long bracket)
First of all, congratulations
for your choice.
We are pleased to showcase
you this universal video
projector ceiling bracket,
which is easy to install and can
be used for nearly all LCD and
DLP projectors up to 30 kg.
Before you install the
ceiling bracket, read all the
instructions carefully and follow
the installation procedures
step by step.
Inside the packaging you
will find the following
elements:
- 01 universal spider bracket to
fit on the projector
- 01 ceiling mounting plate
Fig. 2
Fig. 3
Fig. 1
- 04 crowned head screws
3x10 mm. (diameter x lenght)
- 04 crowned head screws
4x10 mm. (diameter x lenght)
- 04 crowned head screws
5x10 mm. (diameter x lenght)
BF
A
G
C
B
A
- 02 screws needed to fix
the spider at the joint
- 02 nuts needed to fix
the spider at the joint
- 02 knurled socket head
screws needed to fix the
column to the ceiling plate
Position parts (C) and (A) like in Fig. 1.
Mount part (C) to part (A) using the 2 screws (G).
Check that the space for the cables on the ceiling
plate is mounted at the same side as the cable
hole on the variable column.
Take parts (B) and (A) and mount them using the
screws (E) and the nuts (F) like shown in Fig. 2.
Be sure that the screws (E) are very well tightened,
so the elements (B) and (A) are anchored in a safe
way.
Insert the power cable and signal
cables through the holes in the
variable column (A) like shown in Fig.
3, and let the cable come out again
through the hole at the lower end of
the variable column.
H- 04 washers

STEP 4 STEP 5
STEP 6
1) Before installing the bracket on the ceiling, check that you have assembled
it correctly according all steps (from step 1 up till step 6)
2) Check that the ceiling is suitable to fix and support the weight of the bracket
and the projector.
3) Maximum projector weight you can install with the universal ceiling bracket
is 30 kg.
4) In case some of the parts are missing in the packaging, do not use
alternative components in order to fix the projector, but contact immediately
your dealer.
5) In case the instructions are not clear or if you have any doubt how to
assemble the bracket, please contact your dealer.
6) After the installation, please keep all parts not used for your installation.
WARNING
Fig. 5
Fig. 6
Fig. 4
Move the plates of the spider bracket into the
position of the fixing points on the projector
like shown on the picture here above.
Fix all the screws (D) on the spider plates (B).
The spider can be adjusted to the projector
fixing points situated on different heights.
In case there are some steps on the projector
chassis between the different fixing points,
please adjust the adapters like shown on Fig 5.
Take care to leave
enough space between
the spider bracket and
the projector surface,
in order not to obstruct
the ventilation of the
projector lamp
(see Fig. 6).