SCRUB TRAK VendNet 3599 Owner's manual

AUG 2018 4225060•B
VendNetTM
165 North 10th Street
Waukee, IOWA 50263-0488
United States of America
MODEL:
3599 –RETURN CENTER
PROGRAMMING
MANUAL

TABLE OF CONTENTS
QUICK REFERENCE CHART........................................................................................................................ 1
CONTROLLER FUNCTIONS ......................................................................................................................... 2
SERVICE MODE........................................................................................................................................ 2
SERVICE MODE BUTTON........................................................................................................................ 2
TOUCH SCREEN ...................................................................................................................................... 2
LOCAL IP SETTINGS .................................................................................................................................... 3
LOCAL IP SETTINGS ............................................................................................................................... 3
WEB IP SETTINGS ........................................................................................................................................ 3
WEB IP SETTINGS ................................................................................................................................... 3
HARDWARE................................................................................................................................................... 4
COUNT MOTORS...................................................................................................................................... 4
TEST CARD READER .............................................................................................................................. 4
TEST ELEVATOR ..................................................................................................................................... 4
TEST MOTOR............................................................................................................................................ 4
TEST DROP SENSOR .............................................................................................................................. 4
SET TIME ....................................................................................................................................................... 4
CONFIGURATION.......................................................................................................................................... 5
MAIN MACHINE ........................................................................................................................................ 5
MOTOR RANGE..................................................................................................................... 5
MOTOR ROWS ...................................................................................................................... 5
DROP SENSOR ..................................................................................................................... 5
ELEVATOR............................................................................................................................. 5
AUTO - REINSTATEMENT .................................................................................................... 5
CONFIGURATION.......................................................................................................................................... 6
SATILLITE (MACHINE 2).......................................................................................................................... 6
USD1 ......................................................................................................................................................... 6
USD2 ......................................................................................................................................................... 6
USD3 ......................................................................................................................................................... 6
UPLOAD INVENTORY................................................................................................................................... 6
MACHINE SETTINGS .................................................................................................................................... 6
Note:
The Model and Serial numbers are needed for you to obtain quick service and parts information for your
machine. The numbers are given on the identification plate located on the back side of the cabinet of the
machine.
MODEL NUMBER: ___________________________________
SERIAL NUMBER: ___________________________________

4225060•B | PROGRAMMING MANUAL | SCRUB TRAK | RETURN CENTER | 1
QUICK REFERENCE CHART
MACHINE SETTINGS
UPLOAD INVENTORY
WEB IP SETTINGS
PRIMARY HOST ID
PRIMARY HOST PORT
ALTERNATE HOST
PORT
ALTERNATE HOST IP
CONFIGURATION
SATELLITE MACHINE
MACHINE 1
USD 1
USD 2
USD 3
HARDWARE
TEST CARD READER
COUNT MOTORS
TEST DROP SENSOR
TEST ELEVATOR
TEST MOTOR
LOCAL IP SETTINGS
DHCP
STATIC IP
SUBNET MASK
GATEWAY
DNS
SET TIME
EXIT PROGRAM

2| SCRUB TRAK | RETURN CENTER | PROGRAMMING MANUAL | 4225060•B
CONTROLLER FUNCTIONS
SERVICE MODE
The Service Mode is used to access the programming features
of the controller: Test Vend, Set Motors, or Set Custom Program
Settings.
SERVICE MODE BUTTON
The Service Mode Button is located near the top right corner of the
controller board cover. Press the button to access the Service Mode
programming features. Press the button again to exit and return to Sales
Mode. If no key is pressed within 60 seconds while in Service Mode, the
controller automatically exits to the Sales Mode.
TOUCH SCREEN
Use the touch screen, and select the button to access that menu
selection

4225060•B | PROGRAMMING MANUAL | SCRUB TRAK | RETURN CENTER | 3
LOCAL IP SETTINGS
To enter this menu press the service mode button and touch Local IP Settings
LOCAL IP SETTINGS
WEB IP SETTINGS
To enter this menu press the service mode button and touch Web IP Settings
WEB IP SETTINGS
STEP
DISPLAY
1.
Open Door or Press Service Mode Button
Main Menu
2.
Press Local IP Settings
Local IP Settings Menu
3.
Press on/off to Enable/Disable DHCP
DHCP
(CURRENT SETTING)
4.
Press in text box to change Static IP
STATIC IP
192.168.0.79 (example)
5.
Press in text box to change Subnet Mask
SUBNET MASK
255.255.255.0 (example)
6.
Press in text box to change Default Gateway
DEFAULT GATEWAY
192.168.0.1
7.
Press in text box to change DNS Server
DNS SERVER
192.168.0.1 (example)
8.
Press Back to Previous Page to exit to main menu
Main Menu
STEP
DISPLAY
1.
Press Service Mode Button
Main Menu
2.
Press Web IP Settings
Web IP Settings Menu
3.
Press in text box to change Web IP Settings
PRIMARY HOST IP
168.215.88.21 (example)
4.
Press in text box to change Primary Host Port
PRIMARY HOST PORT
80 (example)
5.
Press in text box to change Alternate Host IP
ALTERNATE HOST IP
168.215.88.21 (example)
6.
Press in text box to change Alternate Host Port
ALTERNATE HOST PORT
80 (example)
7.
Press Back to Previous Page to exit to main menu
Main Menu

4| SCRUB TRAK | RETURN CENTER | PROGRAMMING MANUAL | 4225060•B
HARDWARE
To enter this menu press the service mode button and touch Hardware
COUNT MOTORS
STEP
DISPLAY
1.
Press Service Mode Button
MAIN MENU
2.
Press Hardware Button
HARDWARE MENU
3.
Press Count Motors Button
COUNTING MOTORS
PLEASE WAIT…
4.
MOTOR COUNT, PRESS TO
CONTINUE
TEST CARD READER
TEST ELEVATOR
TEST MOTOR
TEST DROP SENSOR
SET TIME
STEP
DISPLAY
1.
Press Service Mode Button
MAIN MENU
2.
Press Hardware Button
HARDWARE MENU
3.
Press Test Card Reader to test reader
TEST CARD READER
4.
Press Swipe Card
SWIPE CARD
5.
Press Back to Previous Page to exit to main menu
MAIN MENU
STEP
DISPLAY
1.
Press Service Mode Button
MAIN MENU
2.
Press Hardware Button
HARDWARE MENU
3.
Press Reset Sequence Test to run test sequence
ELEVATOR TEST SEQUENCE
4.
Press Shelf Test to run Shelf test
SHELF TEST
5.
Press Baffle Test to run baffle test
BAFFLE TEST
6.
Press Door Open Test to run door open test
DOOR OPEN TEST
7.
Press Back to Previous Page to exit to main menu
MAIN MENU
STEP
DISPLAY
1.
Press Service Mode Button
MAIN MENU
2.
Press Hardware Button
HARDWARE MENU
3.
Press Test Motor to test vend
MOTOR SELECTIONS
4.
Press Motor number to enter selection
SPINNING…
XXX (selection entered
5.
Press Back to Previous Page to exit to main menu
MAIN MENU
STEP
DISPLAY
1.
Press Service Mode Button
MAIN MENU
2.
Press Hardware Button
HARDWARE MENU
3.
Press Test Drop Sensor to sensor
OPTIC STATUS
4.
Press Back to Previous Page to exit to Main Menu
MAIN MENU

4225060•B | PROGRAMMING MANUAL | SCRUB TRAK | RETURN CENTER | 5
To enter this menu, press the service mode button. SET TIME
CONFIGURATION
To enter this menu, press the service mode button. CONFIGURATION.
MAIN MACHINE
MOTOR RANGE
MOTOR ROWS
DROP SENSOR
ELEVATOR
AUTO - REINSTATEMENT
STEP
DISPLAY
1.
Press Service Mode Button
MAIN MENU
2.
Press Motor Range Button
MOTOR RANGE
3.
Press First Motor text box to enter the First Motor (XX)
ENTER FIRST MOTOR
4.
Press Second Motor text box to enter the Last Motor (YY)
ENTER LAST MOTOR
5.
Press Back to Previous Page to exit to main menu
MAIN MENU
STEP
DISPLAY
1.
Press Service Mode Button
MAIN MENU
2.
Press Motor Range Button
MOTOR RANGE
3.
Press First Row text box to enter the First Row (XX)
ENTER FIRST ROW
4.
Press Second Row text box to enter the Last Row (YY)
ENTER LAST ROW
5.
Press Back to Previous Page to exit to main menu
MAIN MENU
STEP
DISPLAY
1.
Press Service Mode Button
MAIN MENU
2.
Press Drop Sensor Button
SENSOR MENU
3.
Press On/Off to toggle sensors
Available Settings
None
Optic 1
Optic 2
Vibration
VARIOUS SENSORS
4.
Press Back to Previous Page to exit to main menu
MAIN MENU
STEP
DISPLAY
1.
Press Service Mode Button
MAIN MENU
2.
Press Elevator Button
ELEVATOR TOGGLE
3.
Press On/Off to toggle elevator
ELEVATOR TOGGLE
4.
Press Back to Previous Page to exit to main menu
Main Menu
STEP
DISPLAY
1.
Press Service Mode Button
MAIN MENU
2.
Press Auto Reinstatement Button
AUTO REINSTATEMENT TOGGLE
3.
Press On/Off to toggle elevator
MACHINE 1
4.
Press Back to Previous Page to exit to main menu
MAIN MENU

6| SCRUB TRAK | RETURN CENTER | PROGRAMMING MANUAL | 4225060•B
CONFIGURATION
SATILLITE (MACHINE 2)
Programming steps are the same as MAIN MACHINE with the following exceptions:
MOTOR RANGE will be 210 to 269.
MOTOR ROWS will be 7 to 12.
USD1
Programming steps are the same as MAIN MACHINE with the following exception:
1. MOTOR RANGE will be 300 to 399.
USD2
Programming steps are the same as MAIN MACHINE with the following exception:
1. MOTOR RANGE will be 400 to 499.
USD3
Programming steps are the same as MAIN MACHINE with the following exception:
1. MOTOR RANGE will be 500 to 599.
UPLOAD INVENTORY
To enter this menu, press the service mode button.
UPLOAD INVENTORY.
MACHINE SETTINGS
To enter this menu, press the service mode button.
MACHINE SETTINGS.
NOTES:

4225060•B | PROGRAMMING MANUAL | SCRUB TRAK | RETURN CENTER | 7

8| SCRUB TRAK | RETURN CENTER | PROGRAMMING MANUAL | 4225060•B
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they
are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or
applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
VendNet™
165 North 10th Street
Waukee, Iowa 50263
United States of America
USA & Canada
International
Service
[phone]
[phone]
Parts
[phone]
Email
[e-mail]
Web Site
www.vendnetusa.com