manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Seagate
  6. •
  7. Network Storage Server
  8. •
  9. Seagate U10 ST320423A User manual

Seagate U10 ST320423A User manual

U10

FamilyInstallationGuide
ST320423A, ST315323A, ST310212A
The Easiest Way to Install Your Drive
DiscWizardis Seagate’s exclusive Windows program that is included with
your drive for easy drive installation.You can use this software if you
already have a bootable hard drive in your computer and you are running
Windows 98 or Windows 95.
Run DiscWizard
before
installing your drive for customized step-by-step
instructions for your system.
To run DiscWizard:
• Select Run from the Windows Start menu and type
x
:\setup, where
x
is
the drive letter of your diskette or CD-ROM.
If you cannot run DiscWizard, follow the instructions on this installation
sheet to install and configure your drive.
What You Need
•Phillips screwdriver and four 6-32 UNC drive mounting screws
•A standard 40-pin ATA interface cable,
or
an 80-conductor cable to run
Ultra ATA 66 (max length: 18 inches)
•An unused drive power cable for your new drive
Ultra ATA/66 Requirements
The drive can support transfer rates up to 66 Mbytes per second
(UDMA 4) in Ultra ATA/66 mode. For your drive to run in this mode, you
need the following:
•A computer that supports UDMA modes 3 and 4
•A 40-pin 80-conductor cable (available from your dealer)
•A software utility to confirm and activate Ultra ATA/66. Seagate®provides
a utility called UATA66.exe that is included on your CD, or you can
download it from our Web site at www.seagate.com.
•The Windows 98 operating system
Handling Precautions
Disc drives are extremely fragile.
Do not
drop or jar the drive.
Keep the drive in the protective SeaShellcontainer until you are
ready to install it.This will minimize handling damage.
The drive is enclosed in a black, flexible cover called a SeaShield®.
Do not remove this permanent cover—it protects the drive from
electrostatic discharge (ESD) and minor impact damage.
Protect your drive from static discharge by wearing a grounded wrist
strap throughout the installation process.
Always handle the drive by the edges or frame.
Do not apply pressure or attach labels to the circuit board or the
top of the drive.
Setting the Jumpers
Refer to the jumper settings below to configure the drive for your system.
Options jumper block (J8)
Drive is slave
Cable select
Master with a non-ATA-
compatible slave
Master or single drive
2
684
1753
•Master or single-drive: The drive is shipped configured for a master
or a single-drive with a jumper set on pins 7 and 8.
•Drive is slave: To configure the drive as a slave, or second drive on
the cable, remove all the jumpers.
•Master with non-ATA compatible slave: Use this setting if the slave
drive is not recognized. Configure the master drive with a jumper set on
pins 5 and 6 and pins 7 and 8 to enable this option.
•Cable-select option: Computers that use cable-select determine the
master and slave drives by selecting or deselecting pin 28, CSEL, on
the interface bus.To enable cable select, set a jumper on pins 5 and 6.
Attaching Cables and Mounting the Drive
1. Attach one end of the drive interface cable to the interface connector
on your computer’s motherboard
(see your computer manual for
connector locations).
!
Caution. Align pin 1 on the motherboard connector with pin 1 on
your drive connector. Pin 1 is marked by a stripe on one side of the cable.
2. Attach the interface connector and the power connector to the drive.
Note. You can mount the drive in any orientation. Usually it is mounted
with the circuit board down.
3. Secure the drive in the computer using four 6-32 UNC mounting
screws in either the side-mounting or bottom-mounting holes. Insert
the screws no more than 0.20 inch (5.08 mm) into the bottom-mounting
holes and no more than 0.14 inch (3.55 mm) into the side-mounting holes.
!
Caution. Do not overtighten the screws or use metric screws. This
may damage the drive.
Configuring the BIOS
For your computer to recognize your new drive, configure your
computer’s BIOS as follows:
1. Run the system setup program.
2. Enable LBA mode and UDMA mode, if available.
3. Select the auto-detect option. If this is not available, select “User-
defined drive type” and enter the CHS (cylinder, head, sectors)
parameters for your drive from the table listed below.The CHS
addressing supports capacities up to 8.4 Gbytes only. To access the
full capacity of the drive, use LBA mode.
4. Save and exit the system setup program.
BIOS Settings
CHS Mode LBA Mode
Drive Model Cylinders Heads Sectors Total Sectors*
ST320423A 16,383 16 63 40,011,300
ST315323A 16,383 16 63 30,008,475
ST310212A 16,383 16 63 20,005,650
*One sector equals 512 bytes.
Publication Number:SG35346-001,Rev.A
Pin 1
Interface
connector
Power
connector
Computer
Motherboard
Pin 1
Master
Slave
Note. If you are using a 40-pin 80-conductor
cable, attach the
blue
connector to the
motherboard, the
black
connector to the
master drive, and the
grey
connector
to the slave.
Preparing the Drive with Disk Manager
InstallingaSingleDrive
If you are installing a single drive, we recommend using Disk Manager
to automatically partition and format your drive. This software is stored
on the diskette or CD provided with your drive.To run Disk Manager:
1. Boot your computer from your Windows 98 or 95 startup diskette.
2. Insert your DiscWizard diskette or CD. If you are using the CD,
change to the drive letter of your CD-ROM.
3. At the prompt, type dm. Then press ENTER. Disk Manager will guide
you through the installation process.
4. Proceed to the section on “Loading the Operating System.”
InstallingaSlaveDrive
If you are installing a second drive, or slave, to your system, use the
DiscWizard software provided with your drive.
Note. If you
do not
want to install your drive using Disk Manager,
see “Standard DOS installation” below to partition and format
your drive.
Standard DOS Installation
!
Caution.Partitioning or formatting a drive erases all data on it.
Seagate assumes no liability if you erase your data.
DrivePartitioning
Partitioning divides the drive into sections or partitions that function as
separate logical drives (labeled C,D,E, etc.). To partition your new drive:
1. Insert a bootable DOS diskette and restart your computer.
2. Type fdisk and press ENTER. If you have two drives installed,
select your new drive from option five of the FDISK menu.
3. Select “Create DOS partition or logical DOS drive” by pressing 1.
Then press ENTER.
4. Select “Create Primary DOS partition” by pressing 1 again. Create
your first drive partition.To make the partition bootable, mark the
partition as
active.
5. Verify that all space on your new drive has been partitioned. If neces-
sary, create an extended partition with additional logical drives.
DriveFormatting
!
Caution. Use the correct drive letters to prevent formatting a drive
that already contains data.
At the A: prompt, type format
x
:/s. where
x
is the letter of your first new
partition. Repeat the format process for all new partitions. Proceed to
“Loading the Operating System” below.
Loading the Operating System
1. Boot your computer from your Windows 98 or 95 startup diskette with
the Windows CD loaded.
2. At the prompt, type
x
:\setup, where
x
is the drive letter of your CD-
ROM drive. Continue with the Windows setup instructions.
Troubleshooting
If your drive is not working properly, follow these troubleshooting steps.
1. Does the drive spin up? A spinning drive produces a faint whine
and clicking noise that begins when power is applied. If your drive
does not spin, check that the power connector and interface cable
are securely attached and the jumpers are installed correctly.
2. Does the computer recognize the drive? Verify that the drive is
enabled in the system CMOS or setup program. If not, select the
autodetect option and enable it. If your drive has a problem, it may not
be recognized by the system.
3. Does FDISK detect the drive? Run the FDISK program located on
your Windows startup diskette. Type fdisk/status to verify that
your hard drive is present.
4. Does Scandisk find the drive defect-free? Scandisk is a utility
located on your Windows startup diskette that scans the drive for de-
fects. If defects are detected, this may be an indication of a problem.
5. Why won’t the drive format to full capacity? Verify that your BIOS
has autodetect and LBA mode enabled. Otherwise you may need to
use Disk Manager, located on your diskette or CD, to achieve the full
capacity of your drive.
Note. If the above steps do not solve the problem, contact your
dealer or visit www.seagate.com to download SeaTools disc
diagnostics software and more troubleshooting advice.
Seagate Support Services
Internet
For online information about Seagate products, visit www.seagate.com or
e-mail your disc questions to: [email protected].
TechnicalSupport
If you need further help installing your drive, first consult your dealer.
Dealers are familiar with their unique system configurations and can help
you with system conflicts and other technical issues. If you need
additional help, you can talk to a Seagate technical support specialist.
Before calling, note your system configuration and drive model number.
Africa +31-20-316-7222 Poland 00 800-311 12 38
Australia +61-2-9725-3366 Spain 900-98 31 24
Austria 0 800-20 12 90 Sweden 0 207 90 073
Belgium 0 800-74 876 Switzerland 0 800-83 84 11
Denmark 80 88 12 66 Singapore +65-488-7584
France 0 800-90 90 52 Taiwan +886-2-2514-2237
Germany 0 800-1826831 Turkey 00 800-31 92 91 4
Hong Kong +852 2368 9918 United Kingdom 0 800-7835177
Ireland 1 800-55 21 22 USA/Canada/ 1-800SEAGATE
or
Italy 800-790695 LatinAmerica +1-405-936-1234
MiddleEast +31-20-316-7222 Other European
Netherlands 0 800-7324283 Countries + 31-20-316-7222
Norway 800-11391
Warranty To determine the warranty status of your Seagate disc drive, contact your
place of purchase or visit our Web site at www.seagate.com for more information.
RMA (Return Merchandise Authorization) RunSeaToolsto diagnoseyourdrive
before requesting a return authorization. In addition, please verify that your drive is
defective by following the troubleshooting checklist in this guide. Seagate offers
comprehensive customer support for all Seagate drives worldwide. Seagate customer
service centers are the only facilities authorized to service Seagate drives. Drive
return procedures vary depending on geographical location and are subject to current
InternationalTradeRegulations.
Shipping Your Drive
Caution. Back up the data on your drive before shipping it. Seagate assumes no
responsibility for data lost during shipping or drive repair. Shipping a drive in an
unapproved container voids the warranty.Pack the drive with foam rubber only. Do not
use peanuts, bubble wrap or newspapers.
Keep your original box and packing materials for storing or shipping your drive.To
preserve the warranty status of your drive, any product returned to Seagate must be
properly packaged in the original box or a Seagate-approved container to prevent
physical and electrical damage while in transit.
Electromagnetic Compliance for the European Union Thismodelcomplieswith the
European Union requirements of the Electromagnetic Compatibility Directive 89/336/
EEC of 03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and
Directive 93/68/EEC of 22 July 1993. Compliance of this drive, as a system
component, was confirmed with a test system. We cannot guarantee that your system
will comply.The drive is not meant for external use (without properly designed
enclosure, shielded I/O cable, etc.). Sicherheitsanleitung 1. Das Gerrät ist ein
Einbaugerät, das für eine maximale Umgebungstemperatur von 55°C vorgesehen ist.
2. Zur Befestigung des Laufwerks werden 4 Schrauben 6-32 UNC-2A benötigt. Bei
seitlicher Befestigung darf die maximale Länge der Schrauben im Chassis nicht mehr
als 3,3 mm und bei Befestigung an der Unterseite nicht mehr als 5,08 mm betragen.
3. AlsVersorgungsspannugen werden benötigt:+5V ± 5% 0,6A; +12V ±% 0,8A (1,9A
fur ca.30 Sek.fur ± 10%) 4. DieVersorgungsspannung muss SELV entsprechen.
5. Alle Arbeiten auf dem Festplatte dürfen nur von Ausgebildetem Servicepersonal
durchgeführt werden. Bitte entfernen Sie nicht die Aufschriftenschilder des
Laufwerkes.6. Der Einbau des Laufwerkes muss den Anforderungen gemäss DIN IEC
950 VDE 0805/05.90 entspreche.
© 2000 Seagate Technology, Inc.All rights reserved.
PublicationNumber:SG35346-001,Rev.A, February 2000
Seagate, SeagateTechnology, the Seagate logo, U10, DiscWizard, SeaShell and
SeaShield are either registered trademarks or trademarks of SeagateTechnology, Inc.
All other trademarks are the property of their respective owners.

This manual suits for next models

2

Other Seagate Network Storage Server manuals

Seagate Central SRN01C User manual

Seagate

Seagate Central SRN01C User manual

Seagate ST320005SHA10G-RK - BlackArmor NAS 420... User manual

Seagate

Seagate ST320005SHA10G-RK - BlackArmor NAS 420... User manual

Seagate Mirra User manual

Seagate

Seagate Mirra User manual

Seagate NAS Pro 2-Bay User manual

Seagate

Seagate NAS Pro 2-Bay User manual

Seagate Business Storage 1-Bay NAS User manual

Seagate

Seagate Business Storage 1-Bay NAS User manual

Seagate ST320005LSA10G-RK - BlackArmor 2 TB NAS 220 Network Attached Storage... User manual

Seagate

Seagate ST320005LSA10G-RK - BlackArmor 2 TB NAS 220 Network Attached Storage... User manual

Seagate BlackArmor NAS 440 User manual

Seagate

Seagate BlackArmor NAS 440 User manual

Seagate Business Storage 1-Bay NAS User manual

Seagate

Seagate Business Storage 1-Bay NAS User manual

Seagate Mirra User manual

Seagate

Seagate Mirra User manual

Seagate ST320005LSA10G-RK - BlackArmor 2 TB NAS 220 Network Attached Storage... User manual

Seagate

Seagate ST320005LSA10G-RK - BlackArmor 2 TB NAS 220 Network Attached Storage... User manual

Seagate ST310005MNA10G-RK - BlackArmor 1 TB NAS 110 Centralized Network Attached Storage... User manual

Seagate

Seagate ST310005MNA10G-RK - BlackArmor 1 TB NAS 110 Centralized Network Attached Storage... User manual

Seagate NAS Pro 4-Bay User manual

Seagate

Seagate NAS Pro 4-Bay User manual

Seagate Business Storage 4-Bay NAS Instruction Manual

Seagate

Seagate Business Storage 4-Bay NAS Instruction Manual

Seagate Business Storage 1-Bay NAS User manual

Seagate

Seagate Business Storage 1-Bay NAS User manual

Seagate 8-BAY RACKMOUNT NAS User manual

Seagate

Seagate 8-BAY RACKMOUNT NAS User manual

Seagate Maxtor Central Axis User manual

Seagate

Seagate Maxtor Central Axis User manual

Seagate 8-BAY RACKMOUNT NAS User manual

Seagate

Seagate 8-BAY RACKMOUNT NAS User manual

Seagate WSS NAS SRPS20 User manual

Seagate

Seagate WSS NAS SRPS20 User manual

Seagate NAS 400 User manual

Seagate

Seagate NAS 400 User manual

Seagate STU62001LW Viper User manual

Seagate

Seagate STU62001LW Viper User manual

Seagate Business Storage 1-Bay NAS Service manual

Seagate

Seagate Business Storage 1-Bay NAS Service manual

Seagate NAS 440 User manual

Seagate

Seagate NAS 440 User manual

Seagate NAS 400 User manual

Seagate

Seagate NAS 400 User manual

Seagate 8-BAY RACKMOUNT NAS User manual

Seagate

Seagate 8-BAY RACKMOUNT NAS User manual

Popular Network Storage Server manuals by other brands

IBM SAN512B-6 Installation, service and user guide

IBM

IBM SAN512B-6 Installation, service and user guide

Thecus N2520 series user manual

Thecus

Thecus N2520 series user manual

Allnet ALL60200 user manual

Allnet

Allnet ALL60200 user manual

Advantech ASR-3100 Startup manual

Advantech

Advantech ASR-3100 Startup manual

Dell EMC NX440 Installation and service manual

Dell EMC

Dell EMC NX440 Installation and service manual

HP NetStorage 6000 Hard Drive Replacement

HP

HP NetStorage 6000 Hard Drive Replacement

NETGEAR ReadyNAS Pro Pioneer user guide

NETGEAR

NETGEAR ReadyNAS Pro Pioneer user guide

Dell PowerEdge T710 Technical guide

Dell

Dell PowerEdge T710 Technical guide

SMC Networks NAS04 - annexe 3 user guide

SMC Networks

SMC Networks NAS04 - annexe 3 user guide

Buffalo TeraStation III TS-IXL user manual

Buffalo

Buffalo TeraStation III TS-IXL user manual

easyRAID Q08+F2R2 Hardware user manual

easyRAID

easyRAID Q08+F2R2 Hardware user manual

American Megatrends StorTrends 1312-N Specifications

American Megatrends

American Megatrends StorTrends 1312-N Specifications

NEC NEC Express5800 Series user guide

NEC

NEC NEC Express5800 Series user guide

HP ProLiant ML350 G4p Specifications

HP

HP ProLiant ML350 G4p Specifications

Supero SBB 937R-E2JB user manual

Supero

Supero SBB 937R-E2JB user manual

SMC Networks SMC7208SBR Specifications

SMC Networks

SMC Networks SMC7208SBR Specifications

Tandberg Data StorageLoader Installation and user manual

Tandberg Data

Tandberg Data StorageLoader Installation and user manual

CRU Dataport RTX430-3QR user manual

CRU Dataport

CRU Dataport RTX430-3QR user manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.