Seakeeper 3 User manual

UNPACKING
INSTRUCTIONS
Product:
Document #:
Rev:
Page:
SEAKEEPER 3
90394
3
1 of 5
Procedure:CRATE UNPACKING INSTRUCTIONS
Description: Instructions for how to disassemble the gyro crate
A SEAKEEPER 35 gyro is shown in the illustrations below.
1) Inspect crate and note any damage.
Remove the marked screws that attach
the lid to the crate as shown. Carefully
remove the lid.
2) Remove marked screws from panel A as shown below. Remove panel A.
Remove screws from circled
location.
Panel A

UNPACKING
INSTRUCTIONS
Procedure:
Document #:
Rev:
Page:
CRATE UNPACKING INSTRUCTIONS
90394
3
2 of 5
3) Repeat step 2 on Panel B. Remove panel B.
4) Panel C is not fastened to the crate base.
Remove Panel C.
5) Panel D is not fastened to the crate base.
Remove Panel D.
Panel B
Panel C
Panel D

UNPACKING
INSTRUCTIONS
Procedure:
Document #:
Rev:
Page:
CRATE UNPACKING INSTRUCTIONS
90394
3
3 of 5
6) Keep the gyro bolted to the base until ready for installation. The base may be moved using a
forklift or pallet jack if needed. To separate gyro from crate base, remove the lag screws at each
corner of the frame shown circled below. A ¾” socket or wrench will be required. Attach slings
or chains to lift eyes (see arrows below) at top of enclosure. Prior to lifting, read step 4. (Note:
gyro might look different than illustrated below).

UNPACKING
INSTRUCTIONS
Procedure:
Document #:
Rev:
Page:
CRATE UNPACKING INSTRUCTIONS
90394
3
4 of 5
7) The next step is to lift the gyro assembly out of the crate. The following photographs containing
green circles show acceptable methods to lift the gyro, such as a spreader bar or long lift slings.
Keep the lifting lines as close to vertical as possible. Do NOT use short lines as shown in the red
circle as the lift eyes may be damaged. (NOTE: GYRO MAY LOOK DIFFERENT THAN
ILLUSTRATED.)
Illustration “A”

UNPACKING
INSTRUCTIONS
Procedure:
Document #:
Rev:
Page:
CRATE UNPACKING INSTRUCTIONS
90394
3
5 of 5
REVISION HISTORY
REVISION
DESCRIPTION OF CHANGES
DATE
APPROVED
1
INITIAL RELEASE
17JUL14
BRD
2
INSERTED NEW IMAGES TO REPRESENT THE LATEST SHIPPING CRATE
09DEC2014
BRD
3
TRANSITION FROM QUICK-CRATE DESIGN
06NOV2023
WCS
SEAKEEPER, INC.
44425 PECAN COURT, SUITE 151, CALIFORNIA, MARYLAND, 20619, U.S.A
PHONE: [phone] FAX: [phone] E-MAIL: [email protected]