
4. MOUNTING THE HOSE REEL
WARNING! Ensure that the hose is disconnected from the air supply. Do not position the reel in direct sunlight, in areas of
extreme heat or cold or where it will be a hazard.
4.1. MOUNTING
4.1.1. Ensure that the wall, floor, ceiling or other structure to which the air hose reel is to be fixed is of sound construction and will hold the
workingstrainofthehosewheninuse.
4.1.2. Screworboltthereeltothemountingsurface(seefig.1formountingholedimensions).Adjusttheguidearm(7)tosuitthe
installation.Removethefourclampingnuts(42),washers(41)andbolts(40),repositionthearmandthenreplacethe bolts,
washersandscrews.Typicalexamplesareshowninfig.2.
4.1.3. Fittheinlethose(provided)totheinletfitting(24)usingthreadsealer or PTFEtape.The free end of the inlet hose should be
connectedtotheairsupply.
4.1.4.
Beforeuse,checkthatallfixingsaresafeandsecure,andthatthehose extends andretractswithease.
5. OPERATION
5.1. Pullthehoseoutward.Anintermittentclickingnoisewillbenoticedasthehoseextends.
5.2. Ifyoustoppullingthehosewhilsttheclickingnoisecanbehearditwillremainlockedatthatlength.
5.3. Toextendthehosefurther,pullandagainstopwhilsttheclickingnoisecanbeheardtolockthehose.
5.4. To unlock the hose and allow it to automatically rewind, extend the hose a little further and release during a quiet stage between
theperiodsofclicking.DO NOTallowthereeltorewindinanuncontrolledmanner,alwaysfeedthehosetothereel.
5.5. Ifitisnecessarytoalterthereeltensionproceedasfollows.
WARNING!Ensurethattheairsupplyisdisconnected.
5.6. Pullapproximately2mtrofhosefromthedrumandallowthedrumtolock.
5.7. Removethehosebumperblocks(55)anddrawthe2mtrofhosebackthroughthehoseguide.
5.8. Wrapthehoseoneturnaroundthedrumtoincreasethetensionorunwraponeturntodecreasethetension.
5.9. Feedtheendofthehosebackthroughthehoseguideandretthebumperblocks.
5.10. Checkthetensionandadjustfurther,asabove,ifnecessary.
6. MAINTENANCE
WARNING!Beforeattemptingmaintenanceorinspection,ventanypressureremaininginthehose.
6.1. Toensurereliableoperation,cleanthehoseandcasingregularly.DO NOTsprayorwettheproduct,butcleanwithadampcloth.
DO NOTusesolventsordetergents,asthesemaycausepermanentdamage.
6.2. Thehosereeldoesnotrequirespecialmaintenanceasitislubricatedforlife.Iftheproductneedsattention,consultyour
nearestauthorisedserviceagent.
WARNING: DO NOT attempt to loosen, or remove, any casing nuts or bolts yourself, other than to reposition the hose
guide (see 4.1.2.).
6.3. Replacementofthesupplyhoseshouldbecarriedoutbyskilledpersonnelonly,consultyournearestauthorisedserviceagent.
6.4. Shouldyouwishtostoretheairhosereel,ensurethatitiscleananddry.Placeinadark,safe,dry,childprooflocation,wherethe
temperaturewillremainreasonablystable.DO NOTstoreinanylon,orplastic,bagasthiswillencouragecondensation.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.
IMPORTANT:Noliabilityisacceptedforincorrectuseofthisproduct.
WARRANTY:Guaranteeis12monthsfrompurchasedate,proofofwhichwillberequiredforanyclaim.
SoleUKDistributor,SealeyGroup.
KempsonWay,SuffolkBusinessPark,
BurySt.Edmunds,Suffolk.
IP327AR
www.sealey.co.uk
sales@sealey.co.uk
01284757500
01284703534
Web
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
SA841HV|Issue121/0715
Original Language Version
© Jack Sealey Limited
Fig.2
Fig.1