Sealey GSS1508 User manual

INSTRUCTIONS FOR
GALVANISED STEEL SHED
GALVANISED STEEL SHED GREEN
MODEL NO’S: GSS1508 & GSS1508G
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
I
MPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
1. SAFETY
WARNING!Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when building this shed.
9Keep the work area clean, uncluttered and ensure there is adequate lighting.
9Keep children and unauthorised persons away from the working area.
8DO NOT use the shed for any purpose other than that for which it is designed.
9Use appropriate safety clothing including eye protection.
NOTE: The assembly of this product will require assistance.
888DO NOT attempt assembly in windy conditions
2. TOOLS REQUIRED
Drill, measuring tape, cross head screwdriver, rivet gun, rubber mallet, sturdy ladder, adjustable spanner, 2 saw horses, 3mm steel drill
bit, 9mm masonry drill bit.
GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited
Refer to
instruction
manual
Wear protective
gloves Wear eye protection Wear safety footwear

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

3. PARTS LIST
GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited

GSS1508/G| Issue 2 (I) 08/08/17
© Jack Sealey Limited
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email [e-mail] or telephone [phone]
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk