Sealey SBSC01 User manual

OUTDOOR STORAGE BOX
460 X 1120 X 540MM POLYPROPYLENE
MODEL NO: SBSC01
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL SAFETY
8888 DO NOT overload the box creating excessive forces on box walls or base.
8888 DO NOT drop loads on to base or items already stored.
8888 DO NOT use the storage box for any purpose other than that for which it is designed.
8888 DO NOT stand in or on the storage box.
8888 DO NOT use to continuously transport stored items from one place to another.
8988 Stand the storage box on an accessible flat horizontal plinth or concrete path.
8988 Padlock for safety and security.
2. INTRODUCTION
Manufactured from heavy-duty polypropylene, maintenance free and fully weatherproof. Features hinged lid which can be padlocked (not
included) for added security. Fitted with two carry-handles, closed ventilation and two integral wheels on base for easy manoeuvrability. Ideal
for use in multiple domestic applications, including garden tool and furniture storage. Supplied at packed and can be easily assembled with
no tools required.
3. SPECIFICATION
Model No: ...........................SBSC01
External Size (W x D x H): .....1120 x 460 x 540mm
Internal Size (W x D x H): .....1100 x 450 x 500mm
Maximum Load: .........................150kg
Nett Weight: ............................ 9.8kg
Refer to
instructions
SBSC01 | Issue 3 (H,F) 08/05/2019
Original Language Version
© Jack Sealey Limited

4. ASSEMBLY
Carefully unpack the product and check the contents against the diagram and parts list below. Should any items be missing or damaged
contact your Sealey dealer.
SBSC01 | Issue 3 (H,F) 08/05/2019
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on [e-mail] or 01284 757505. Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. Please log on to www.sealey.co.uk, email [e-mail] or telephone [phone]
Snap in handles. Snap rollers into housings.
Fix front and rear panels to base
panel.
Fix side panels.
Fix the lid to the back panel using the three
hinge pins and lid retainers.
Locate and snap holes in roller
housings over plugs in bottom panel.
Hinge
pins (x3)
Lid (x2)
retainers
Roller (x2)
Handle (x2)
Roller
frame (x2)
Lid