Sealey GSC110385.V3 User manual

4-SHELF EXTRA-WIDE GALVANIZED STEEL
FLOOR CABINET
MODEL NO: GSC110385.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.
9Locate cabinet in a suitable work area.
9Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING! Use cabinet on level and solid ground, preferably concrete.
9Keep the cabinet clean and tidy in accordance with good workshop practice.
9Keep children and unauthorised persons away from the work area.
8DO NOT use the cabinet for any purpose other than that for which it is designed.
8DO NOT use the cabinet outdoors.
8DO NOT place the cabinet in a damp or wet location or an area where there is condensation.
8DO NOT clean the cabinet with any solvents which may damage the surfaces or the protective coating.
8DO NOT move the cabinet when there are items placed inside.
8DO NOT step on the shelves.
8DO NOT overload the cabinet.
2. INTRODUCTION
Floor standing galvanized steel cabinet with lockable double doors. Fitted with four adjustable shelves and base storage. Supplied
with four keys. Ideal for factory, workshop or home use. Features two rear wiring grommets allowing power tool batteries and other
 devicestobechargedwhilstinstorage.Floorcabinetissuppliedat-packedandwillneedsomeassembly.
3. SPECIFICATION
Model No ...................................................... GSC110385.V3
Overall Size (W x D x H) ..................... 1100 x 400 x 1830mm
Shelf Size (W x D x H) ............................1095 x 370 x 20mm
Shelves ................................................................................4
4. ASSEMBLY
4.1. Unpacktheunitandconrmthatallthepartslisted(g.1).
4.2. Assemble the unit on a solid level surface.
4.3. The assistance of a second person will be required.
4.4. Toassembletheunityouwillrequirearubbermalletandacross-headscrewdriver.
4.5. Wherepracticalxunittoawallforextrastrengthanddurability.
GSC110385.V3 Issue 1 19/03/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves

NOTE: It is advisable to have at least two people (wearing gloves) working together to assemble this unit.
Step 1 - g.2
 Layrearpanel(g.1.2)onoorando󰀨erupsidepanels(g1.3,g.1.4)totherelevantsides.NOTE the side panels are handed.
Using only the lower two holes in the side panels, screw them in place to the rear panel.
DO NOTxtheupperscrewholesatthisstage.SeeStep3.
Step 2 - g.3
 Standtheassemblyuprightando󰀨erupthedoorfrontsection(g.1.1)totintothecutoutsinthesidepanels.Thiswillrequire
at least two people to support the structure whilst assembling this stage.
Step 3 - g.4
 Placeoorsection(g.1.6)insitueandpressdownrmlytoengageit
with the other panels. Note the location of the cutouts to avoid the door
frame central support.
Original Language Version
© Jack Sealey Limited GSC110385.V3 Issue 1 19/03/21
1 2 3 4
567
g.1
Item
no.
Description Qty. Part no.
1Doors 1
2Rear Panel 1
3Side (LH) 1
4Side (RH) 1
5Base 1
6Top 1
7Shelf 4
g.2
g.4
DO NOT xscrewstoupper
holes at this stage
g.3

Original Language Version
© Jack Sealey Limited
Step 4 - g.4, g.5
 Placeroofpanel(g.1.5)insitueandscrewinplaceusingthreeholesintherearedgeofthepanel.Useaatbladedscrewdriverto
 deformthe‘H’slotsuchthatitengageswiththeslotinthefrontpanel(g.X.).
Step 5
Arrange shelf supports to suit your requirements. See parts list for description.
GSC110385.V3 Issue 1 19/03/21
g.5
g.4
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on [e-mail] or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.