Sealey APMS63 User manual

680MM MODULAR REEL CABINET
MODEL NO: APMS63
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general
workshop practice regulations are adhered to when using this cabinet.
9Locate cabinet in a suitable work area.
9Keep the work area clean, uncluttered and ensure there is adequate
lighting.
WARNING! Use cabinet on level and solid ground, preferably concrete.
9Keep the cabinet clean and tidy in accordance with good workshop
practice.
9Keep children and unauthorised persons away from the work area.
8DO NOT use the cabinet for any purpose other than that for which it is
designed.
8DO NOT use the cabinet outdoors.
8DO NOT place the cabinet in a damp or wet location or an area where
there is condensation.
8DO NOT clean the cabinet with any solvents which may damage the
surfaces or the protective coating.
8DO NOT move the cabinet when there are items placed inside.
8DO NOT step on the shelves.
8DO NOT overload the cabinet.
2. INTRODUCTION
N.B. ILLUSTRATED WITH OPTIONAL WORKTOP - Don’t forget to order your choice of pressed wood or stainless steel separately. Use as
part of a complete garage storage system or as an individual storage unit. Solid reel cabinet for convenient and tidy use of cable reels and air
hose reels. Aluminium handles. Option of stainless steel or pressed wood worktop. Suitable for use with Sealey Air Reel SA895 and cable reels
CRM101 and CMR151.
3. SPECIFICATION
Model no: ................................................................. APMS63
Size (W x D x H):.....................................680 x 460 x 910mm
Small drawer (x2):.....................................565 x 400 x 60mm
Large drawer (x1):...................................565 x 400 x 135mm
4. ASSEMBLY
APMS63 Issue 1 30/10/19
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
Wear
protective
gloves
STEP 1:
Remove drawers (see right)
STEP 2:
Remove
front
panel
One each side
Drawer weight capacity: ................................................. 20kg

Original Language Version
© Jack Sealey Limited
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
APMS63 Issue 1 30/10/19
STEP 3:
Fit worktop (not supplied)
STEP 4:
Fit bracket to reel
STEP 5:
Fit reel into cabinet
STEP 6:
Ret front panel
STEP 7:
Ret drawers