SEASIDE CASUAL FURNITURE ENVIRO WOOD 009 User manual

1
Tools Required:
Phillip's Head Screwdriver
7 /16 Socket or Wrench
(009) Portsmouth Party Bar rev. B
WOOD ENVIRO
SEASIDE CASUAL FURNITURE
Hardware:
(57) 3/4” Pan Head Screws
(6) 1-1/4” Phillips Head Screws
(2) 3/4” Phillips Pan Head Screws
(1) Bar Top
Parts List:
Assembly Instructions
Step One: Set Up
READ ENTIRE INSTRUCTIONS BEFORE BEGINNING! Carefully remove contents
from box. Make sure that all parts and hardware are included. Will Require Two People for
Handing of Bar
Step Two: Base Assembly
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Instruction Revision: D
(1) Top Shelf (2) Lower Shelves
(1) Left Side Assembly (1) Right Side Assembly (1) Front Panel
Stand side up with front leg down. Insert front panel into pock-
ets of front leg of side assembly (Front Leg has bolt). Tap in to
make sure front panel sits tightly against the leg (Left Picture).
Secure using (3) 1-1/4” Phillips Head Screw through pre-drilled
pockets in front panel (Right Picture). Repeat process for other
side.

2
Step Three: Top Shelf Assembly
Place top shelf onto top aluminum shelf
supports on front and side panels while
lightly separating back legs just enough
to fit shelf into pocket in legs (Left Pic-
ture). Secure using (15) 3/4” Pan Head
Screws through aluminum into shelf
slats while holding legs tightly to the
shelf. (Right Picture)
Step Four: Lower Shelf Assemblies
Insert middle shelf into bar at an angle
as shown (Left Picture). Then place onto
aluminum supports. Secure using (15)
3/4” Pan Head Screws through alumi-
num into shelf slats while holding legs
tightly to the shelf. (Right Picture). Re-
peat process for bottom shelf.
Step Five: Bar Top Assembly
Stand up base assembly. Align long alu-
minum support on bar top with insert
nuts on front legs of base assembly (Left
Picture). Secure long aluminum with (2)
3/4” Phillip Pan Head Screws into pre-
drilled holes (Right Picture). Then se-
cure long and short aluminum supports
using (12) 3/4” Pan Head Screws.