Securikey 66E SERIES User manual

Page 1 of 2
14107/11/02
66E SERIES COMBINATION LOCK
MANAGER OPERATING INSTRUCTIONS
Enter each digit SLOWLY and DISTINCTLY. The lock signals at each entry.
TO ADD NEW USER
•Enter MANAGER combination. HOLD DOWN LAST DIGIT OF
COMBINATION UNTIL LOCK SIGNALS WITH DOUBLE BEEP AGAIN
AND LED STAYS ON.
•Press 1. Lock signals twice.
•PRESS NEW USER ID No. (i.e. 6) Lock signals twice.
•New user enters their own 6 digit combination twice. Lock signals twice
after each valid entry.
•New user is now active.
TO DISABLE USER
•Enter MANAGER combination. HOLD DOWN LAST DIGIT OF
COMBINATION UNTIL LOCK SIGNALS WITH DOUBLE BEEP AGAIN
AND LED STAYS ON.
•Press 2. Lock signals twice.
•PRESS USER ID No. (i.e. 6) Lock signals once. User is now temporarily
disabled.
TO RE-INSTATE DISABLED USER
•Enter MANAGER combination. HOLD DOWN LAST DIGIT OF
COMBINATION UNTIL LOCK SIGNALS WITH DOUBLE BLEEP AGAIN
AND LED STAYS ON.
•Press 1. Lock signals twice.
•PRESS USER ID No. (i.e. 6) Lock signals once. User is now reinstated.
TO REMOVE USER
•Enter MANAGER combination. HOLD DOWN LAST DIGIT OF
COMBINATION UNTIL LOCK SIGNALS WITH DOUBLE BEEP AGAIN
AND LED STAYS ON.
•Press 3. Lock signals twice.

Page 2 of 2
14107/11/02
•PRESS USER ID No. (i.e. 6) Lock signals once. User is now permanently
removed.
66E SERIES COMBINATION LOCK
MANAGER OPERATING INSTRUCTIONS
CHANGING BATTERY (Use only alkaline batteries)
Repeated beeping during an opening indicates that the battery is low.
•Pull off battery cover.
•Replace battery(ies)
•Replace cover.
TO EXTRACT AUDIT FILE
First, prepare your computer and click the safe icon. Plug the tag reader into the
input pad.
•Enter MANAGER code. HOLD DOWN LAST DIGIT OF COMBINATION
UNTIL THE LOCK SIGNALS WITH DOUBLE BEEP AGAIN. THE LED
WILL NOW COME ON.
•Press 7 to send audit file to computer.
TO CHANGE MANAGER CODE
•Enter 6 zeros – lock beeps TWICE
•Enter current Manager Code – lock beeps TWICE
•Enter new 6 digit code – lock beeps TWICE
•Enter new 6 digit code again – lock beeps TWICE
MANAGER CODE IS NOW RESET