SecurView SV-5110.II User manual
INSTALLATIONINSTRUCTION
SV-5110.II License barcolorcamera
SecurViewseriesLicenseplatebarwaterproof back-up camerasaredesigned to
be installed onanyvehicleusing the existinglicenseplatemounting holes.It is
easy toinstallwithno drillingrequired,requiring minimalinstallation time.
Thisuniquelydesignedproduct canbe ofuseforanypassengercar, SUVand
Van, alsocan beof useforlarge trucks, schoolbus, busorRVand boat aswell.
Furthermore, itnot onlycan be installed onthelicenseplate, but alsoother
locationsof the vehicle, suchasonthe sidesof cargo trailers, abovethe hatchor
inside oroutside motorhome’s.
The SV-5110.II type isdesignedforanypassengercar, SUV, Van, pickup truck
ortrailer.
SPECIFICATION:
1/3”COLORCMOSSENSORSPECIFICATIONS
Image Device:OV7949
TVSystem:PAL/NTSC
EffectivePixel:628 x586 pixels/ 510 x496 pixels
Sensing Area: 5.961mm x4.276mm
Scanning System: 2:1Interlance
Sync. System:Internal
Resolution: 420TVlines
SupperlowIllumination: 0.1Lux
Video Output: 1.0vp-p,75Ohm
GammaConsumption:0.45
ACC:Auto
S/NRatio:Betterthan 48dB
WhiteBalance:Auto
ElectronicShutter:1/50Sec-12.5µSec(PAL)/1/60Sec-12µSec(NTSC)
BLC:Auto
Current Consumption:Max. 60mA
PowerSupply:DC12V
Operating Temperature:-20 oC~+70 oC, RG95%
Lens: 3.6mm (P)/2.8mm(N)F=2.0
LensAngle: 130o(P
TECHNICAL SUPPORT:(800) 998-6880
VER 05.17.07
INSTALLATIONTIPS:
IMPORTANT!!
Readthisinstructionsheetcompletelyand yourmonitorsinstructions
beforebeginningtheinstallation.
Note:MostLicense plates do notrequiremodification. However, please
lookovercameramountingandplacementoptionspriortomaking
modificationstovehicle.
Step1. Removelicenseplate,ifnecessarycut orfilea¼slot abovethelicense
platemounting holesasshownbelow.
Step2. Installthe Licenseplatebarcameraoverthe faceon the topedgeof the
licenseplate; makesurethescrewsaresecure. DO NOTOVERTIGHTEN!!
Overtightening maydamage the cameramountingholelocations.
Step3. Wireconnections:
Connect theCamera’s(Yellow)connectortovideoinput onmonitorunit; Black
connectorisforthe powerconnected toDC 12V.
A.Connect theyellow(RCA)connectortovideomonitorinput connection,
and the black connectortothe video monitorpoweroutput connector,if
the Rearviewmonitorunithasautoreversecamerapoweron feature. (See
Wiring Diagram1.)
B.Connect theyellow(RCA)connectortovideomonitorinput connection
and the black connectortoreverselightpowerwirebyusing the power
wire, if the Rearviewmonitordoesnot haveautoreversecamerapower
on feature.Whenthe vehicleisplacedinreverseposition,the camerais
powered on. (See WiringDiagram2.)
C.Connect theyellow(RCA)connectortocamerainput onVideoSwitch
Controlunit(3VSC),if usingRear,Left &Right 3camera’s, connect the
black connectortoVideoSwitchBoxpowerdistributorwirebaseon rear,
left &right operatoroptions. (See WiringDiagram3.)
D. The powerconnection and videoconnectionsmaydepend on themonitorunit
features.Beforeinstalling thecamera, pleasesee the instructionsforthemonitor
unitfirst.
TheBack upcamerasystemisstrictlyadriverassistantdevice. It
shouldnotbeconsideredsafetydevice foranypurposes.Manufacturer
and distributorsoftheproductdonotguaranteeorassumeliabilityfor
collision ordamages thattake placewhenbacking up yourvehicle.
www.crimestopper.com
email@crimestopper.com
Phone (800)998-6880
FAX (805)581-9500
© 2007CrimestopperSecurityProducts
ONLINETECHNICALSUPPORT
www.crimestopper.com
Table of contents
Other SecurView Dashcam manuals
