SEI Locksley Fireplace Classic Mahogany User manual

Page 1
FA9016A0TX
Locksley Fireplace -
Classic Mahogany
Assembly Instructions
PO#
：

(1) Quantity
Of 1
Base
(2) Quantity
Of 1
Left
Vertical Panel
(3) Quantity
Of 1
Right Vertical Panel
(4) Quantity
Of 1
Cross Panel
(5) Quantity
Of 1
Left Front Panel
(6) Quantity
Of 1
Right Front Panel
(7) Quantity
Of 1
Middle Front Panel
(8) Quantity
Of 1
Top Panel
(9) Quantity
Of 1
Left Side Panel
(10) Quantity
Of 1
Right Side Panel
(11) Quantity
Of 3
Rail
(12) Quantity
Of 2
Wood Block
L
ocksley
Fireplace
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage.
P
age
2

(13) Quantity
Of 1
Firebox (in separate carton)
A Quantity
Of 31
Wood Dowel Dia 8 x 30mm
B Quantity
Of 29
Cam Bolt
C Quantity
Of 29
Cam Lock
D Quantity
Of 10
Screw Dia1/ 8’’ x 1’’L
E Quantity
Of 2
Plastic Strap
F Quantity
Of 4
Bracket
G Quantity
Of 4
Anchor
H Quantity
Of 4
Screw Dia1/8”x1-1/2”L
I Quantity
Of 4
Screw Dia1/8”x5/8”L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Page 3
Assembly Tool Required
No.2 Phillips Screwdriver
(Not Include)

Page 4
Figure 1
Insert cam locks (C) into holes on cross
panel (4).
Screw cam bolts (B) into holes on left
vertical panel (2) and right vertical panel
(3).
Attach cross panel (4) to left vertical
panel (2) and right vertical panel (3) by
inserting wood dowels (A) and cam bolts
(B) into corresponding holes until left
vertical panel (2) and right vertical panel
(3) and cross panel (4) meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
Figure 2
Attach assembled unit to middle front
panel (7) by inserting wood dowels (A)
into corresponding holes until middle
front panel (7) and assembled unit meet.
Locksley Bookcase Fireplace
Assembly Instructions
Locksley Fireplace
Assembly Instructions
(3)
(4)
B
A
C
(7) A

Page 5
Figure 3
Insert cam locks (C) into holes on
assembled unit.
Screw cam bolts (B) into holes on left
front panel (5) and right front panel (6).
Attach assembled unit to left front panel
(5) and right front panel (6) by inserting
wood dowels (A) and cam bolts (B) into
corresponding holes until left front panel
(5) and right front panel (6) and
assembled unit meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
Figure 4
Insert cam locks (C) into holes on left
side panel (9) and right side panel (10).
Screw cam bolts (B) into holes on
assembled unit.
Attach left side panel (9) and right side
panel (10) to assembled unit by inserting
wood dowels (A) and cam bolts (B) into
corresponding holes until left side panel
(9) and right side panel (10) and
assembled unit meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
(5)
(6)
AB
C
(10)
(9)
A
B
C

Page 6
Figure 5
Insert cam locks (C) into holes on
assembled unit.
Screw cam bolts (B) into holes on base
(1).
Attach assembled unit to base (1) by
inserting wood dowels (A) and cam bolts
(B) into corresponding holes until base
(1) and assembled unit meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
Figure 6
Insert cam locks (C) into holes on
assembled unit.
Screw cam bolts (B) into holes on top
panel (8).
Attach top panel (8) to assembled unit by
inserting wood dowels (A) and cam bolts
(B) into corresponding holes until top
panel (8) and assembled unit meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
(1)
A
B
c
AB
C
(8)

Page 7
Figure 7
Use screws (D) to connect rail (11) to
base (1).
Tighten screws (D) with Phillips
screwdriver.
Figure 8
Place firebox (13) into the back of the
unit.
Use screws (D) to connect wood block
(12) to left vertical panel (2) and right
vertical panel (3).
Tighten screws (D) with Phillips
screwdriver.
D

Page 8
Figure 9
Attach Bracket (F) to the back of the
top panel (8) with screws (I).
Tighten screws (I) using Phillips
screwdriver.
Mark two desired locations on the wall
and drill two 3/16" holes.
Insert anchors (G) into the two holes on
wall as shown. Use a hammer to insert
the plastic anchors until they are flush
with the wall.
Then attach the brackets (F) onto the
wall using screws (H).
Tighten screws (H) using Phillips
screwdriver.
Figure 10
Move this item close to the wall bracket
(F) and tie in all brackets (F) together
with plastic strap (E) as shown in
diagram.
Anti-tipping hardware must be used for
this product to avoid tipping and injury.
Top supports up to 85 lb.
FI
FI

Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/si e/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at servi[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Parts Replacement Form

Page 1
FA9016B0TX
Locksley Pair Of Bookcase -
Classic Mahogany
Assembly Instructions
PO#：

(1) Quantity
Of 1
Left
Bookcase Top
(2) Quantity
Of 1
Right
Bookcase Top
(3) Quantity
Of 1
Left
Bookcase Base
(4) Quantity
Of 1
Right Bookcase Base
(5) Quantity
Of 1
Left Side Of Left
Bookcase
(6) Quantity
Of 1
Right Side Of
Left Bookcase
(7) Quantity
Of 1
Left Side Of Right Bookcase
(8) Quantity
Of 1
Right Side Of Right Bookcase
(9) Quantity
Of 4
Fixed Shelf
(10) Quantity
Of 2
Back Panel
Quantity
Of 1
FA9016A0TX
Page 2
Locksley Pair Of Bookcase
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage.

A Quantity
Of 32
Wood Dowel Dia 8 x 30mm
B Quantity
Of 24
Cam Bolt
C Quantity
Of 24
Cam Lock
D Quantity
Of 16
Plastic Cover
E Quantity
Of 28
Screw Dia 1/8’’ x 1/2”L
F Quantity
Of 2
Plastic Strap
G Quantity
Of 4
Bracket
H Quantity
Of 4
Anchor
I Quantity
Of 4
Screw Dia1/8”x1-1/2”L
J Quantity
Of 4
Screw Dia1/8”x5/8”L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Page 3
Assembly Tool Required
No.2 Phillips Screwdriver
(Not Include)

Page 4
Figure 1
Insert cam locks (C) into holes on fixed
shelves (9).
Screw cam bolts (B) into holes on side
panels (5), (6), (7) and (8).
Attach fixed shelves (9) to side panels
(5), (6), (7) and (8) by inserting wood
dowels (A) and cam bolts (B) into
corresponding holes until side panels
(5), (6), (7), (8) and fixed shelves (9)
meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
Figure 2
Insert cam locks (C) into holes on
assembled unit.
Screw cam bolts (B) into holes on left
bookcase base (3) and right bookcase
base (4).
Attach assembled unit to left bookcase
base (3) and right bookcase base (4) by
inserting wood dowels (A) and cam bolts
(B) into corresponding holes until left
bookcase base (3) and right bookcase
base (4) and assembled unit meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
Plug plastic cover (D) into cam locks (C).
(9)
(6)
(5)
(7)
(8)
Locksley Pair Of Bookcase
Assembly Instructions
BA
C
D
(6)
(5)
(3)
(7)
(8)
(4)

Page 5
Figure 3
Insert cam locks (C) into holes on
assembled unit.
Screw cam bolts (B) into holes on left
bookcase top (1) and right bookcase top
(2).
Attach bookcase top (1) and (2) to
assembled unit by inserting wood dowels
(A) and cam bolts (B) into corresponding
holes until bookcase top (1), (2) and
assembled unit meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
Plug plastic cover (D) into cam locks (C).
Figure 4
Attach back panel (10) to the back of the
units with screws (E).
(5)
(6)
B
D
(1)
(8)
(7)
(2)
(10)

Page 6
Figure 5
Attach Bracket (G) to the Left Bookcase
Top (1) &Right Bookcase Top (2) with
Screw (J).
Tighten Screw (J) using Philips
screwdriver.
Mark two desired locations on the wall
and drill two 3/16" holes.
Insert anchors (H) into the two holes on
wall as shown. Use a hammer to insert
the plastic anchors until they are flush
with the wall.
Then attach the brackets (G) onto the
wall using Screw (I).
Tighten Screw (I) using Philips
screwdriver.
Figure 6
Place the bookcase beside the
FA9016A0TX and move this item close to
the wall Bracket (G) and tie in all brackets
(G) together with plastic strap (F) as
shown in diagram.
Anti-tipping hardware must be used for
this product to avoid tipping and injury.

Figure 7
Now your new Locksley Bookcase
Fireplace is ready to use.
Bookcase shelves support up to 15
lb.
Bookcase tops support up to 15 lb.
Page 7

Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/si e/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Parts Replacement Form