SEI BC272600TX User manual

Page | 1
PO#:
BC272600TX
Adler Storage Bench
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.seifurniturestore
.com

Page | 2
1) Quantity
of 1
Top Panel
2) Quantity
of 4
Middle Panel
3) Quantity
of 1
Bottom Panel
4) Quantity
of 1
Shelf Panel
5) Quantity
of 1
Back Panel
6)Quantity
of 4
Leg
7) Quantity
of 1
Cushion
8) Quantity
of 2
Metal Frames
9) Quantity
of 2
Bottom Basket
A) Quantity
of 25
Cam Bolts
B) Quantity
of 25
Cam Locks
C) Quantity
of 20
Wood Dowels Dia. 5/16"x1-1/4"
Adler Storage Bench
Parts List
Please check packaging for all parts and hardware before discarding. Before beginning assembly, separate each
type of hardware. Carefully study the diagrams below and check that you have all parts indicated.
Call Customer Service if missing hardware. Using the incorrect hardware will cause damage.

Page | 3
D)Quantity
o f 8
Bolt Dia. 1/4x3” L
E) Quantity
of 1
Allen Wrench
F) Quantity
of 16
Cotton Mat
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the
finish. Avoid rubbing or scratching the surface
with rough or abrasive objects.
For replacement parts or questions, please call
SEI Customer Service at 1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver
(Not Included)

Page | 4
Figure 1
.
Attach the Leg (6) to Bottom Panel (3)
with Bolts (D).
Tighten bolt with Allen Wrench (E).
Please do not overtighten cam bolts. Stop when they feel
secure.
Figure 2
Insert Cam Locks (B) into corresponding
holes on Middle Panel (2).
Screw Cam Bolts (A) into threaded holes
on Bottom panel (3).
Attach Bottom Panel (3) to Middle Panel
(2) by inserting Cam Bolts (A) and Wood
Dowel (C) into corresponding holes until all
panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Cover Cam Locks (B) with Cotton Mat (F)
provided.
Adler Storage Bench
Assembly Instructions
6
6
6

Page | 5
Figure 3
Insert Cam Locks (B) into corresponding
holes on Shelf Panel (4).
Screw Cam Bolts (A) into threaded holes
on Back Panel (5).
Attach Back Panel (5) to Shelf Panel (4) by
inserting Cam Bolts (A) and Wood Dowel
(C) into corresponding holes until all
panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Figure 4
Insert Cam Locks (B) into corresponding
holes on Middle Panel (2) & Back Panel
(5).
Screw Cam Bolts (A) into threaded holes
on Shelf Panel (4) Bottom panel (3).
Attach Shelf Panel (4) Bottom panel (3) to
Middle Panel (2) by inserting Cam Bolts
(A) and Wood Dowel (C) into
corresponding holes until all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Cover Cam Locks (B) with Cotton Mat (F)
provided.
5
A

Page | 6
Figure 5
Insert Cam Locks (B) into corresponding
holes on Middle Panel (2).
Screw Cam Bolts (A) into threaded holes
on Shelf Panel (4).
Attach Shelf Panel (4) to Middle Panel (2)
by inserting Cam Bolts (A) and Wood
Dowel (C) into corresponding holes until all
panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Cover Cam Locks (B) with Cotton Mat (F)
provided.
Figure 6
Insert Cam Locks (B) into corresponding
holes on Middle Panel (2) & Back Panel
(5).
Screw Cam Bolts (A) into threaded holes
on Top Panel (1).
Attach Top Panel (1) to Middle Panel (2) &
Back Panel (5) by inserting Cam Bolts (A)
and Wood Dowel (C) into corresponding
holes until all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Cover Cam Locks (B) with Cotton Mat (F)
provided.
2
2
A
1
A

Page | 7
Figure 7
Attach the Wicker Bottom (9) to Wicker
Frame (8).
Figure 8
Insert Wicker Baskets.
Put the Cushion (7) onto Top Panel (1).
7
8
9

Page | 8
Figure 9
Now your Adler Storage Bench is ready to
use!

Page | 9
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas),
Mon-Fri 9am – 4pm CST, or email us at [e-mail]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues
with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Parts Replacement Form
Customer Service: 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019