Seiko 7T11 User manual

Cal. 7T11
INSTRUCTIONS (P. 3)
BEDIENUNGSANLEITUNG (S. 19)
INSTRUCTIONS (P. 35)
ISTRUZIONI (P. 51)
INSTRUCCIONES (P. 67)
INSTRUÇÕES (P. 83)
(99 )

ENGLISH
3
CONTENTS
Page
DISPLAY & BUTTONS ................................................................................. 4
SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION ..... 5
STOPWATCH................................................................................................ 8
SCREW-LOCK-TYPE CROWN..................................................................... 11
TACHYMETER.............................................................................................. 12
TELEMETER ................................................................................................ 14
BATTERY CHANGE...................................................................................... 16
SPECIFICATIONS......................................................................................... 18
IFor the care of your watch, see “TO PRESERVE THE QUALITY OF YOUR
WATCH” in the attached Worldwide Guarantee and Instruction Booklet.
You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 7T11. To ensure its
optimum performance, please read the instructions in this booklet carefully before using it.
Please keep this manual handy for ready reference.
Sie sind jetz t stolzer Besit zer ein es SEIKO Analog -Quarzuhr Kal. 7T11. Lesen Sie diese
Bedienungsanleitung vor der Verwendung aufmerksam durch, um Ihre Uhr optimal zu nutzen.
Heben Sie diese Bedienungsanleitung gut auf, um jederzeit wieder nachlesen zu können.
Vous voici l'heureux propriétaire d'une montre quartz analogique SEIKO Cal. 7T11. Pour en
obtenir des performances optimales, veuillez lire attentivement cette brochure avant d'utiliser
la montre. Conservez ce manuel pour vous y référer en cas de besoin.
Grazie di aver acquistato questo orologio SEIKO Analogico al Quarzo Cal. 7T11. Per poter
utilizzare l’orologio al massimo delle sue prestazioni leggere attentamente questo manuale di
istruzioni prima di passare all’uso dell’orologio stesso, e conservarlo poi per qualsiasi eventuale
futura consultazione.
Usted es ahora el orgulloso propietario de un reloj SEIKO analógico de cuarzo Cal. 7T11. Para
asegurar el óptimo rendimiento de su reloj, sírvase leer cuidadosamente las instrucciones
contenidas en este manual antes de su uso. Guarde este manual en un lugar muy accesible para
la rápida referencia.
Você poderá sentir-se orgulhoso de possuir um Relógio SEIKO Quartz Análogo Cal. 7T11. Para
garantir o seu excelente rendimento, leia atentamente as instruções contidas neste opúsculo
antes de usá-lo. Conserve este manual à mão para consultas futuras.
7T11

T
A
C
H
Y
M
E
T
E
R
4
0
0
3
0
0
2
5
0
8
0
7
0
6
0
90
100
120
140
160
180
200
English
4
English
5
CAL. 7T11
DISPLAY & BUTTONS
Hour hand
Small second hand
STOPWATCH hour hand
Minute hand
a: Normal position
b: Extended position
time setting, STOPWATCH
hand position adjustment
STOPWATCH minute hand
STOPWATCH second hand
24-hour hand
nTIME
24-hour, hour, minute and small second hands
nSTOPWATCH
12-hour stopwatch in 1-second increments
When the measurement reaches 12 hours, the stopwatch automatically stops.
• Some models may have a screw-lock-type crown. If your watch does, refer to the
“SCREW- LOCK-TYPE CROWN” on page 11.
• Simplified illustrations may be used in the following sections of this manual.
a b
CROWN
A
B
T
A
C
H
Y
M
E
T
E
R
4
0
0
3
0
0
2
5
0
8
0
7
0
6
0
90
100
120
140
160
180
200
lThis watch is designed so that the following adjustments are made with the
crown at the extended position:
1) time setting
2) stopwatch hand position adjustment
Once the crown is pulled out, be sure to make both the above adjustments
before pushing the crown in.
SETTING THE TIME AND
ADJUSTING THE STOPWATCH HAND POSITION
Minute hand
Hour hand
CROWN Pull it out when the small second hand is at the 12 o’clock position.
The small second hand will stop on the spot.
CROWN Tu rn to s e t the 24 - ho ur,
hour and minute hands.
Small second
hand
1. TIME SETTING
24-hour hand

T
A
C
H
Y
M
E
T
E
R
4
0
0
3
0
0
2
5
0
8
0
7
0
6
0
90
100
120
140
160
180
200
T
A
C
H
Y
M
E
T
E
R
4
0
0
3
0
0
2
5
0
8
0
7
0
6
0
90
100
120
140
160
180
200
A
B
English
6
English
7
1. If the crown is pulled out while the stopwatch is measuring, the STOPWATCH hands will be
automatically reset.
2. It is recommended that the hands be set to the time a few minutes ahead of the current time,
taking into consideration the time required to adjust the STOPWATCH hand position.
3. When setting the hour hand, make sure that AM/PM is correctly set, checking the position of the
24-hour hand.
4. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time, and then
turn it back to the exact minute.
STOPWATCH second hand
IIf the STOPWATCH hands are not in the 0 position, follow the procedure below to set them
to the 0 position.
2. STOPWATCH HAND POSITION ADJUSTMENT
t
Press for 2 seconds or longer again.
The STOPWATCH second hand turns a
full circle.
A
Press for 2 seconds or longer.
A
The watch enters the STOPWATCH hand
position setting mode.
t
Press repeatedly to set the STOPWATCH
second hand to the 0position.
The hand moves quickly if Button B is
kept pressed.
B
t
A
B
APress for 2 seconds or longer.
B
Press repeatedly to set the STOPWATCH
hour and minute hands to the 0 position.
The STOPWATCH hour and minute hands
turn a full circle.
• The hands move quickly if Button B is
kept pressed.
• The movement of the STOPWATCH
hour hand and STOPWATCH minute
hand are interlocked.
• Do not keep pressing down Button
A for longer than 2 seconds after
setting the STOPWATCH hour, minute
and second hands. If you do so by
mistake, push the crown back to the
normal position and carry out the same
procedure from the beginning once
again.
t
t
CROWN A f t e r a l l t h e a d j u s t m e n t s a r e
completed, push the crown back in to
the normal position.
STOPWATCH second hand
STOPWATCH hour and minute hands

T
A
C
H
Y
M
E
T
E
R
4
0
0
3
0
0
2
5
0
8
0
7
0
6
0
90
100
120
140
160
180
200
English
8
English
9
STOPWATCH
lThe stopwatch can measure up to 12 hours in 1-second increments.
When the measurement reaches 12 hours, the stopwatch automatically
stops.
lThe measured time is indicated by the STOPWATCH second hand on the
main dial and the STOPWATCH hour and minute hands on the sub dial at
the 6 o’clock position.
lSplit time measurement is possible.
<How to read the stopwatch hands>
The measured time is indicated by the three STOPWATCH hands: the STOPWATCH
second hand, the STOPWATCH minute hand and the STOPWATCH hour hand.
STOPWATCH hour hand
STOPWATCH second hand
STOPWATCH minute hand
[1 hour 48 minutes and 10 seconds]
<How to reset the stopwatch>
While the STOPWATCH hands are moving:
1. Press Button A to stop the stopwatch.
2. Press Button B to reset the stopwatch.
While the STOPWATCH hands are stopped:
Press Button B to reset the stopwatch.
[When the split time measurement is displayed while the stopwatch is
measuring.]
1. Press Button B to fast-forward the STOPWATCH hands. Subsequently, the
STOPWATCH hands return to the ongoing measurement movement.
2. Press Button A to stop the stopwatch.
3. Press Button B to reset the stopwatch.
[When the split time measurement is displayed and the stopwatch is stopped]
1. Press Button B to fast-forward the STOPWATCH hands. Subsequently, the
STOPWATCH hands will stop.
2. Press Button B to reset the stopwatch.
• If the STOPWATCH hands do not return to the 0 position when the stopwatch is reset , follow the
procedure in "SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION."
• Stopwatch hand position adjustment should be done at the same time when the time is set.

English
10
English
11
<STANDARD MEASUREMENT>
<ACCUMULATED ELAPSED TIME MEASUREMENT>
<SPLIT TIME MEASUREMENT>
<MEASUREMENT OF TWO COMPETITORS>
STOP RESET
START
START
START
START
STOP RESTART STOP RESET
SPLIT SPLIT
RELEASE
STOP RESET
FINISH TIME
OF 1ST
COMPETITOR
2ND
COMPETITOR
FINISHES
FINISH TIME
OF 2ND
COMPETITOR
RESET
AB
AAAB
A
A
BBB
B
B
B
A
A
A
A
* Restart and stop can be repeated as many times as required by pressing Button A.
* Measurement and release of the split times can be repeated as many times as required by
pressing Button B.
STOPWATCH OPERATION
SCREW-LOCK-TYPE CROWN
uSome models may have a screw-lock mechanism that can securely lock the
crown by a screw when they are not being operated.
uLocking the crown will help to prevent operational errors and enhance the
water resistant quality of the watch.
uIt is necessary to unlock the screw-lock-type crown before operating it.
Once you have finished operating the crown, make sure to relock it.
lHow to use the screw-lock-type crown
Keep the crown securely locked unless you need to operate it.
* When locking the crown, turn it slowly with care, ensuring that the
screw is properly engaged. Be careful not to forcibly push it in, as
doing so may damage the screw hole in the case.
[How to unlock it]
Turn the crown counterclockwise.
The crown is unlocked and can then be operated.
[How to lock it]
Once you have finished operating the crown, turn it
clockwise while gently pressing it in toward the watch
body until it stops.

English
12
English
13
T
A
C
H
Y
M
E
T
E
R
4
0
0
3
0
0
2
5
0
8
0
7
0
6
0
90
100
120
140
160
180
200
T
A
C
H
Y
M
E
T
E
R
4
0
0
3
0
0
2
5
0
8
0
7
0
6
0
90
100
120
140
160
180
200
TACHYMETER
(for models with tachymeter scale)
lTachymeter scale can be used only when the time required is less than 60 seconds.
To measure the hourly average speed of a vehicle
Use the stopwatch to determine
how many seconds it takes to go
1 km or 1 mile.
1
Tachymeter scale indicated by
the STOPWATCH second hand
gi ve s the avera ge sp eed p e r
hour.
2
Ex. 1
STOPWATCH
second hand:
40 seconds
Tachymeter scale:
“ 90”
“90” (tachymeter scale figure) x 1 (km or mile)
= 90 km/h or mph
Ex. 1: If the measuring distance is extended to 2 km or miles or shortened to 0.5 km or
miles and STOPWATCH second hand indicates “90” on tachymeter scale:
“90” (tachymeter scale figure) x 2 (km or mile) = 180 km/h or mph
“90” (tachymeter scale figure) x 0.5 (km or mile) = 45 km/h or mph
To measure the hourly rate of operation
Use the stopwatch to measure
the time required to complete
one job.
1
Tachymeter scale indicated by
the STOPWATCH second hand
gives the average number of
jobs accomplished per hour.
2
Ex. 2
STOPWATCH
second hand:
20 seconds
Tachymeter
scale:“180”
“180” (tachymeter scale figure) x 1 job
= 180 jobs/hour
Ex. 2: If 15 jobs are completed in 20 seconds:
“180” (tachymeter scale figure) x 15 jobs = 2700 jobs/hour

English
14
English
15
TELEMETER
(for models with telemeter scale)
l The telemeter can provide a rough indication of the distance to the source of
light and sound.
l The telemeter indicates the distance from your location to an object that emits
both light and sound. For example, it can indicate the distance to the place
where lightning struck by measuring the time elapsed after you see a flash of
lightning until you hear the sound.
l A flash of lightning reaches you almost immediately while the sound travels to
you at a speed of 0.33 km/second. The distance to the source of the light and
sound can be calculated on the basis of this difference.
l The telemeter scale is so graduated that the sound travels at a speed of 1 km
in 3 seconds.*
*Under the condition of temperature of 20°C (68°F).
CAUTION
The telemeter provides only a rough indication of the distance to the
place where lightning struck; therefore, the indication cannot be used
as a guideline to avoid the danger of lightning. It should also be noted
that the speed of sound differs depending on the temperature of the
atmosphere where it travels.
HOW TO USE THE TELEMETER
Before beginning, check that the stopwatch has been reset.
START
(Flash of light)
STOP
(Crash of thunder)
Press Button A to start the
stopwatch as soon as you
see the light.
When you hear the sound,
press Button A to stop the
stopwatch.
Read the telemeter scale
t h a t t h e S T O P W AT C H
second hand points to.
Approx. 3 km
* Please note that the STOPWATCH second hand moves in 1-second increments and does not always
point exactly at the graduations of the telemeter scale. The telemeter scale can be used only when
the measured time is less than 60 seconds.
3
2
1
A
A

English
16
English
17
lBattery life indicator
When the battery nears its end, the small second hand moves at 2-second
intervals instead of the normal 1-second intervals. In that case, have the
battery replaced with a new one as soon as possible.
* The watch remains accurate while the small second hand is moving at 2-
second intervals.
The miniature battery which powers your watch should last
approximately 5 years. However, because the battery is inserted at the
factory to check the function and performance of the watch, its actual
life once in your possession may be less than the specified period.
When the battery expires, be sure to replace it as soon as possible to
prevent any malfunction. For battery replacement, we recommend that
you contact an AUTHORIZED SEIKO DEALER and request a SEIKO
SR927SW battery.
* If the stopwatch is used more than 2 hours per day, the battery life may be less
than the specified period.
5
Years
BATTERY CHANGE
WARNING
lDo not remove the battery from the watch.
lIf it is necessary to take out the battery, keep it out of the reach of children. If a
child swallows it, consult a doctor immediately.
CAUTION
l
Never short-circuit, tamper with or heat the battery, and never expose it to fire. The
battery may burst, become very hot or catch fire.
lThe battery is not rechargeable. Never attempt to recharge it, as this may cause
battery leakage or damage to the battery.

English
18
SPECIFICATIONS
1 Frequency of crystal oscillator ............... 32,768 Hz (Hz = Hertz...Cycles per second)
2 Loss/gain (Monthly rate) ....................... Less than 15 seconds when used on the wrist
within normal temperature range (5 ºC - 35 ºC)
3 Operational temperature range.... .......... Between –10 ºC and +60 ºC
4 Driving system ....................................... Step motor 3 pieces
5 Display system
Time.................................................... 24-hour, hour, minute and small second hands in
1-second increments
Stopwatch........................................... Stopwatch second hand in 1-second increments(60
seconds/ 360 degrees)
Stopwatch minute hand in 1-minute increments(60
minutes/ 360 degrees)
Stopwatch hour hand (interlocked with the STOP-
WATCH minute hand.12 hours/ 360 degrees)
6 Battery .................................................... SEIKO SR927SW, 1 piece
7 Battery life .............................................. Approximately 5 years
If the stopwatch is used less than 2 hours per day
8 IC (Integrated Circuit) ............................. C-MOS-IC: 1 piece
* The specifications are subject to change without prior notice for product improvements.