Seima C100 User manual

seima.com.au inwall-c100-in | X9000036 | v 1.0 | page 1 of 8
InstallatIon guIde
1 Cistern must be installed by a licensed plumber. Failure to do so may void the warranty.
2 Refer to pan specifications for dimensions from finished floor level (FFL) to pan inlet and outlet.
3 These instructions show flush plate installation for front access. To install flush plate for remote access, refer to the flush
plate instructions.
20-70
78
INSTALLATION GUIDE
InWall CIsteRn C100
Please note
− All measurements are in millimetres.
− Specifications may vary without notice as part of our continuous improvement practices.
− Clean with a damp cloth. Do not use abrasive cleaners, liquids or pastes.

page 2 of 8
seima.com.au
2
1
min.
X
min. 45
min. 90
min. 30
26
1000
H
X
L=X-H
L(max.150mm)
1
3
2

page 3 of 8
seima.com.au

page 4 of 8
seima.com.au
Note: Ensure that the flush pipe is fixed securely to a nogging in the wall in order to avoid it dislodging from the cistern when the
pan is fitted.

page 5 of 8
seima.com.au

page 6 of 8
seima.com.au

page 7 of 8
seima.com.au
Note: Refer to flush plate installation instructions.

page 8 of 8
seima.com.au
1
2
3
4
5
6
L
L+6mm
Note: Refer to pan installation instructions.