Sena cavalry User manual

BLUETOOTH® HALF HELMET
1.0.0

RIDE CONNECTED
Blast your favorite tunes, talk over the intercom
with your buddies, hear directions from your
GPS and more, all through your Sena Cavalry
Bluetooth Half Helmet. With built-in Bluetooth®
capabilities, HD speakers and a microphone
using Advanced Noise Control™, technology
has never felt so minimal or freeing.
Bluetooth®Integrated
Four-Way Intercom
Built-in Speakers and Mic
Music Sharing
Advanced Noise Control™
900-Meter Intercom

GETTING STARTED
1. This product comes with a Quick Start
Guide, which is a basic version of the User’s
Guide. A FULL VERSION OF THE USER’S
GUIDE CAN BE DOWNLOADED AT
SENA.COM/DOCUMENTS.
2. Update this product for free with the latest
firmware to fully enjoy the new advanced
features built into this product. Visit Sena.
com/device-manager-download/ to see
how to update your product.
3. Users can follow Sena on Facebook,
YouTube and Instagram to receive the
most up to date information on products,
helpful tips and all other announcements
regarding Sena products.
GETTING STARTED
SENA Technologies, Inc.
Sena.com
Customer Support: support.sena.com
E-mail: [email protected]

GETTING STARTED
How to Use This Guide
The legend and callouts are here to help you read the
illustrations. New technology can be confusing, but we’ve
created a simple way to perform actions using illustrations.
Tap button the
specified number
of times
Icon Legend
(+) Button
(-) Button
Center Button
Buttons
Press and Hold button
for the specified amount
of time
Audible prompt from
the Bluetooth Module
Function = Button(s) to Tap or Hold
10 s
HOLD
=1s
HOLD
1x
TAP
“Hello”

QUICK START GUIDE
QUICK START GUIDE
Helmet Structure
Retention
D-Rings
DC Power Charging &
Firmware Upgrade Port
Chinstrap
Bluetooth
Communication
Module
Exterior
Shell

Answer/End Phone Call
Reject an Incoming Phone Call
Start/End Intercom Conversation
Play/Pause Music
Enter Intercom Pairing Mode
Enter Voice Configuration Settings
Microphone
Speakers
(+) Button (-) Button
Center Button
Increase Volume
Track Forward
Scan Radio Stations
Speed Dial
Decrease Volume
Track Back
FM Radio On/Off
Fault Reset
Button
Blue & Red
LED Lights
QUICK START GUIDE

Chinstrap
Gently pull the padded V-straps outward and slide the
helmet onto your head. Route the chinstrap under your
chin, then thread it through both D-Rings.
To fasten securely, thread chinstrap back through the
D-Ring closest to your neck, and pull.
Thread chinstrap
through the D-Rings
Chinstrap
Note: Check the chinstrap’s position and tension
regularly to ensure proper fit.
QUICK START GUIDE

Ear Plates
To amplify the sound from the speakers, you can use the
ear plates. Slide in the included ear plates on both sides
of the helmet. Make sure they are aligned with your ears.
Ear plates
Slide ear plates into
slots on both sides
of the helmet
QUICK START GUIDE

Ear Pads
To amplify the sound from the speakers and cut wind
noise in high speeds, you can use the ear pads. Slide in
the left and right ear pads on corresponding sides of the
helmet. Then slide in each side of the chinstrap through
the bands on the ear pads.
Ear Pads
Slide ear pads into
slots on both sides
of the helmet
QUICK START GUIDE

Slide in the chinstrap
through the ear
pad’s band
Note: It is recommended that you install the ear pads
at all times to enhance the sound quality of the helmet.
Basic Operations
Powering On Powering Off
==
POWER
ON
POWER
OFF
1s
HOLD
1s
HOLD
Volume Up Volume Down
= =
VOLUME
UP
VOLUME
DOWN
1x
TAP
1x
TAP
QUICK START GUIDE