Sena X1 PRO User manual
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 3
LEGEND:
Function = Highlighted Button(s) to Tap or Hold
Tap button the specified
number of times
Press and Hold button for
the specified amount of time
Audible prompt from the Bluetooth Module
10 s
HOLD
1x
TAP
“Hello”
=1s
HOLD
3. CAMERA OPERATION 30
1. ABOuT THE X1 PRO
SMART CYCLING HELMET 8
2. GETTING STARTED 18
TABLE OF CONTENTS
1.1 General Information 8
1.2 Product Details 11
1.3 Wearing the Helmet 12
1.3.1 How to Wear The Helmet 12
1.3.2 Helmet Fitment Check 16
2.1 Button Functions 18
2.1.1 Left Side 18
2.1.2 Right Side 18
2.1.3 Front Side 19
2.2 Powering On and Off 19
2.3 Charging 20
2.4 Checking the Bluetooth Module’s
Battery Level 21
2.5 Volume Adjustment 22
2.6 Downloadable Sena Software 23
2.6.1 Sena Device Manager 23
2.6.2 Sena Smartphone App 23
2.6.3 Sena Camera App 24
2.7 Configuration Menu 24
2.7.1 Headset Configuration Setting 24
2.7.2 Camera Configuration Setting 27
3.1 Camera On or Off 30
3.2 Video Recording 30
3.2.1 Normal Recording Mode 30
3.2.2 Loop Recording Mode 31
5. MOBILE PHONE uSAGE 41
4. PAIRING THE HELMET WITH OTHER
BLuETOOTH DEVICES 34
6. STEREO MuSIC 47
7. INTERCOM SETuP 49
5.1 Making and Answering Calls 41
5.2 Speed Dialing 42
5.2.1 Assigning Speed Dial Presets 42
5.2.2 Using Speed Dial Presets 45
4.1 Mobile Phone 35
4.2 Additional Mobile Phones or
MP3 Player 36
4.3 Advanced Selective Pairing:
Hands-Free or A2DP Stereo 38
4.3.1 Phone Selective Pairing —
Hands-Free Profile 38
4.3.2 Media Selective Pairing —
A2DP Profile 39
6.1 Playing Music with Bluetooth Devices 47
6.2 Music Sharing 48
7.1 Intercom Pairing 49
7.2 Two-Way Intercom 52
7.3 Multi-Way Intercom 53
7.3.1 Starting a Three-Way Intercom
Conference 53
7.3.2 Starting a Four-Way Intercom
Conference 55
7.3.3 Ending Multi-Way Intercom 55
7.4 Three-Way Conference Phone Call
with Intercom Users 55
7.5 Group Intercom 57
TABLE OF CONTENTS CONTINUED
9.
HEADSET CONFIGuRATION SETTINGS
71
10. CAMERA CONFIGuRATION
SETTINGS 74
9.1 Function Priority 71
9.2 Firmware Updates 71
9.3 Voice Prompts 71
9.4 Deleting All Bluetooth Pairing
Information 73
10.1 Video Mode 74
10.2 Video Resolution 75
10.3 Date Caption 76
10.4 Smart Audio MixTM On/Off 77
10.5 Auto Camera Sleep 78
10.6 Format SD Card 79
TABLE OF CONTENTS CONTINUED
8. uSING THE FM RADIO 62
8.1 FM Radio On/Off 62
8.2 Seek and Save Radio Stations 63
8.3 Scan and Save Radio Stations 65
8.4 Temporary Station Preset 66
8.5 Navigating Preset Stations 67
8.6 Region Selection
(Default: Worldwide) 68
8.7 Radio Data System(RDS)
Alternative(AF) Setting
(Default: Enable) 68
8.8 FM Station Guide (Default: Enable) 70
7.6 Universal Intercom 58
7.7 Advanced Noise Control™
(Default: Enable) 60
MENU
1. ABOUT THE X1 PRO
SMART CYCLING
HELMET
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 8
General
Information
Product
Details
Wearing
the Helmet
1.1 General Information
This product is a bicycle helmet. Do not use it for
any other purpose than riding a bicycle. If you use
the helmet for anything else, it may not provide
sufficient protection in an accident.
Sena recommends that you choose a helmet which
provides the most coverage, as a helmet that
covers more of your head may provide additional
protection. Always wear your bicycle helmet low
in the front to protect the forehead, as this area
is most likely to be impacted in a bicycle crash.
Make sure the helmet fits comfortably and is tightly
fastened at all times.
WARNING:
• Your helmet will not protect against injury in
all types of accidents. Even while wearing a
helmet, low speed accidents may result in
serious head injury or death. A bicycle helmet
will not protect against injuries to the spine,
neck or face. In the event of any impact, do not
use this helmet. There may be damage invisible
to you, which may reduce the ability of the
helmet to reduce the harmful effects of a blow
to the head. Such helmet should be returned to
Sena for inspection, or destroyed and replaced.
• Do not modify or remove any original part of
the helmet. Do not use heat damaged helmets.
Heat damaged helmets will appear to have
uneven or have bubbly surfaces.
MENU
1. ABOUT THE X1 PRO
SMART CYCLING
HELMET
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 9
General
Information
Product
Details
Wearing
the Helmet
WARNING:
• This User’s Guide and the stickers inside your
helmet contain many instructions and warnings
about your helmet. It is important for you to
understand everything communicated in them
before your first ride. If you do not, please
contact your authorized Sena Retailer with any
questions you may have. Failure to follow any
of the provided instructions or warnings could
void your warranty, and most importantly, could
result in severe personal injury or death. If you
are a parent or guardian and this helmet is for
your child, please take the time to read this
manual as you should make sure your child
understands everything in this User’s Guide.
• For maximum protection, the Sena X1 Pro
Smart Cycling Helmet must fit properly on the
head and its chinstrap securely fastened under
the chin. With the retention system comfortably
but rmly adjusted, the helmet should allow
sufficient peripheral vision when secured. If the
helmet is too large, it may move on your head
while riding. If the helmet can be moved when
pulled from the back in an upward and forward
direction, then the helmet is not fitted properly.
This could cause the helmet to obstruct your
vision while riding or come off in an accident,
resulting in personal injury or death. Please
refer to Section 1.3: “Wearing the Helmet”
for more details about properly securing and
wearing your helmet.
MENU
1. ABOUT THE X1 PRO
SMART CYCLING
HELMET
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 10
General
Information
Product
Details
Wearing
the Helmet
WARNING:
• The contents of this Sena X1 Pro Smart Cycling
Helmet User’s Guide are subject to change
without notice. Its illustrations may differ from
the actual product. The copyrights for the
User’s Guide belong to Sena Technologies, Inc.
Reproduction or copying of the User’s Guide
without permission is strictly prohibited.
For United States Consumers, this helmet has been
tested and certied to meet and exceed the Bicycle
Safety Standard for Bicycle Helmets, 16 CFR Part
1203. A copy of this regulation can be obtained by
visiting CPSC.gov. For European Consumers, this
helmet has been tested and certified to meet and
exceed European Committee for Standardization,
CE EN1078. A copy of this regulation can be
obtained by visiting CEN.eu.
MENU
1. ABOUT THE X1 PRO
SMART CYCLING
HELMET
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 11
General
Information
Product
Details
Wearing
the Helmet
1.2 Product Details
Speakers
Bluetooth Buttons
DC Power
Charging &
Firmware Upgrade
MicroSD
Card Slot*
QHD Action
Camera
Camera Control
Buttons
* MicroSD card not included.
Microphone
MENU
1. ABOUT THE X1 PRO
SMART CYCLING
HELMET
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 12
General
Information
Product
Details
Wearing
the Helmet
1.3 Wearing the Helmet
1.3.1 How to Wear The Helmet
For proper use, the helmet must sit level
on the head and low on the forehead. The
Sena helmet uses a simple, quick-release
buckle system that, once adjusted, can be
buckled and unbuckled without changing the
adjustment. For proper use, the straps must
be tight and evenly tensioned.
To properly wear your helmet:
1. Position the helmet on your head with
the front covering your forehead. If the
helmet is tipped back and is not covering
your forehead then the helmet is not in the
proper position.
WARNING:
Always wear the helmet in the proper
position on your head with the front of
the helmet covering your forehead for
maximum protection. Never wear the
helmet tipped back as the helmet will
be in the improper position causing your
forehead to be exposed. All tment
adjustments need to be made with the
helmet in the proper position.
MENU
1. ABOUT THE X1 PRO
SMART CYCLING
HELMET
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 13
General
Information
Product
Details
Wearing
the Helmet
2. Position the strap adjuster centered, just
below your ears.
3. Position the helmet low on your forehead
with the buckle under the chin and back
against the throat. The straps should fit
comfortably around both ears.
Strap Adjuster
Buckle
MENU
1. ABOUT THE X1 PRO
SMART CYCLING
HELMET
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 14
General
Information
Product
Details
Wearing
the Helmet
4. With the strap adjuster in the proper
position, adjust the chinstrap tension at the
buckle. Adjust the tension so the chinstrap
is tight and comfortable by pulling the
chinstrap end through the buckle to either
tighten or loosen as needed. Use the
“O-Ring” to secure the excess strap. Always
wear the helmet with the chinstrap buckle
fastened and the chinstrap pulled tight and
positioned back against the throat. With the
strap buckled and the helmet positioned,
you should feel the chinstrap pull firmly
against your chin as you open your mouth.
When properly adjusted the helmet will
wrap around your head and cradle it with
firm, but comfortable pressure.
O-Ring
Chinstrap
MENU
1. ABOUT THE X1 PRO
SMART CYCLING
HELMET
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 15
General
Information
Product
Details
Wearing
the Helmet
5. Your Sena X1 Pro Smart Cycling Helmet
is equipped with an adjustable retention
system which helps stabilize the helmet in
the correct position when you ride. When
wearing the helmet, turn the retention
system knob clockwise to tighten the
helmet or counterclockwise to loosen the
helmet.
Retention
System Knob
Retention System
6. To change the height of the retention
system, firmly pull or push the retention
system upward or downward to a different
position.
Retention
System Knob
Retention System
MENU
1. ABOUT THE X1 PRO
SMART CYCLING
HELMET
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 16
General
Information
Product
Details
Wearing
the Helmet
WARNING:
For maximum protection, this helmet
must be fitted and attached properly to
the wearer’s head in accordance with the
following instructions. If after adjustment
the helmet does not fit properly, do not use
the helmet. Return it to the retailer or Sena.
1.3.2 Helmet Fitment Check
With the retention system knob turned
clockwise until comfortably tight and the
chinstrap buckled under the chin and back
against the throat, grab the helmet with both
hands and try to remove it by rolling the
helmet forward and backward as far as you
can. This is an important test to ensure that
the helmet fits correctly. When you do this,
you should feel the chinstrap pull against the
underside of your chin and the helmet will
resist any movement. If this isn’t the case,
tighten the chinstrap and try it again until this
happens. If you cannot achieve the proper fit,
DO NOT USE THIS HELMET. Replace it with a
different size until the correct fit is achieved.
Also, for a proper Helmet Fitment Check
if you can roll the helmet forward such that
it blocks your vision or if you can roll the
helmet backwards such that your forehead
is not covered, tighten the chinstrap and
the retention system and try again until you
cannot roll the helmet forward or backwards.
MENU
1. ABOUT THE X1 PRO
SMART CYCLING
HELMET
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 17
General
Information
Product
Details
Wearing
the Helmet
WARNING:
• Do not wear anything underneath your
helmet, such as a cap, hood, bundled hair,
headphones, or barrettes, as the helmet
may loosen or come off. Do not wear
anyone else’s helmet and don’t loan your
helmet to anyone else.
• Always make sure the buckle is properly
fastened before you ride. Failure to follow
this instruction could result in serious
personal injury, as the helmet may not stay
in position while riding or during a fall. For
proper use, make sure the loose end of
the chinstrap is tucked through the rubber
“O” ring.
• Check for proper t and adjustment often,
including each time you wear it, and
periodically during use.
• This helmet has been designed for
recreational bicycling. This helmet has
not been approved and is not intended
for extreme uses such as downhill racing
at high speeds, jumping or leaping with
a fully suspended bicycle, snow sports,
water sports, motor sports, street hockey,
playground activities, or other activities
where face, ear, or greater protection or
coverage is desired.
• Always wear a helmet when bicycling.
When you get off your bicycle, remove
your helmet. Do not wear a helmet
while climbing trees, in play areas, on
playground equipment, or, at any time
while not riding a bicycle. Parents: Instruct
children to follow this warning. Failure
to follow this warning could result in
serious personal injury, death or death by
strangulation.
Button
Functions
Powering
On and Off
Charging
Checking the
Bluetooth
Module’s
Battery Level
Volume
Adjustment
Downloadable
Sena Software
Configuration
Menu
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 18
2. GettinG started
MENU
2.1 Button Functions
2.1.1 Lef t Side
Answer/End Phone Call
Reject an Incoming Phone Call
Start/End Intercom Conversation
Play/Pause Music
Enter Intercom Pairing Mode
Enter Voice Configuration Settings
Camera Power On/Off
Start/Stop Recording
(+) Button (-) Button
Multi-Function
Button
Camera LED Lights
Fault Reset
Button
Increase Volume
Track Forward
Scan Radio Stations
Speed Dial
Decrease Volume
Track Back
FM Tuner On/Off
WiFi Power On/Off
Enter Camera Configuration
Settings
Blue, Red and
Green LED Lights
Center Button
Camera Button
2.1.2 Right Side
Answer/End Phone Call
Reject an Incoming Phone Call
Start/End Intercom Conversation
Play/Pause Music
Enter Intercom Pairing Mode
Enter Voice Configuration Settings
Camera Power On/Off
Start/Stop Recording
(+) Button (-) Button
Multi-Function
Button
Camera LED Lights
Fault Reset
Button
Increase Volume
Track Forward
Scan Radio Stations
Speed Dial
Decrease Volume
Track Back
FM Tuner On/Off
WiFi Power On/Off
Enter Camera Configuration
Settings
Blue, Red and
Green LED Lights
Center Button
Camera Button
Button
Functions
Powering
On and Off
Charging
Checking the
Bluetooth
Module’s
Battery Level
Volume
Adjustment
Downloadable
Sena Software
Configuration
Menu
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 19
2. GettinG started
MENU
2.1.3 Front Side
Answer/End Phone Call
Reject an Incoming Phone Call
Start/End Intercom Conversation
Play/Pause Music
Enter Intercom Pairing Mode
Enter Voice Configuration Settings
Camera Power On/Off
Start/Stop Recording
(+) Button (-) Button
Multi-Function
Button
Camera LED Lights
Fault Reset
Button
Increase Volume
Track Forward
Scan Radio Stations
Speed Dial
Decrease Volume
Track Back
FM Tuner On/Off
WiFi Power On/Off
Enter Camera Configuration
Settings
Blue, Red and
Green LED Lights
Center Button
Camera Button
2.2 Powering On and Off
Press and hold the Center Button and the
(+) Button at the same time for 1 second to turn
the headset on or off.
Powering On
=
=
Powering Off
POWER ON
DEVICE
POWER OFF
DEVICE
1s
HOLD
1x
TAP
Button
Functions
Powering
On and Off
Charging
Checking the
Bluetooth
Module’s
Battery Level
Volume
Adjustment
Downloadable
Sena Software
Configuration
Menu
Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 20
2. GettinG started
MENU
2.3 Charging
The Bluetooth Communication Module can be
charged using many common methods via the
supplied USB power & data cable:
1. Plugged into a computer’s USB port.
2. With a USB-equipped AC adapter via a wall-
outlet charger.
Note: Please make sure to take off your helmet
while charging. The headset automatically turns
off during charging.
Charging the Bluetooth Communication Module
DC Power Charging &
Firmware Upgrade Port
Depending upon the charging method, the
Bluetooth Module will be fully charged in about 2.5
hours.
Other manuals for X1 PRO
1
Table of contents
Other Sena Motorcycle Accessories manuals
