Senco DuraSpin DS162-14v User manual

Applications:
Drywall (to wood or steel studs).
Features and Benefits:
• 14.4 volt battery provides the optimum balance of power,
weight and run-time across the full range of screws
• 4,000 RPM high-speed motor drives screws FAST!
• Patented clutch design means long-lasting durability
• One-hour charger and extra battery ensures a backup battery
with a full charge
• Easy depth-of-drive adjustment regulates the precise
amount of countersink
• Easy bit change
• Belt hook — DuraSpin goes where you go
• One full year warranty
Fastener Specifications:
Screw Lengths: 1" (25 mm) to 1 5/8" (41 mm)
Screw Diameters: #6
DuraSpin™Cordless Screw Driver
Made Exclusively for
DRYWALL
NEW!
Application:
Drive/Head:
Thread:
Point:
Finish:
Screw:
Drywall
to Wood Drywall to Light Gauge Steel Drywall to Heavy Gauge Steel
#2 Phillips #2 Phillips #2 Phillips
Bugle Bugle Bugle
Coarse Fine Fine
Sharp Sharp Drill
Grey
Phosphate Grey Phosphate Clear Zinc
#6X11 /4"#6X 11 /4"#6X11 /4"
#6X1"
#6X 15/8"
Designed for high-speed screw fastening in drywall applications,
the DuraSpin DS162-14v drives screws from 1" to 1 5⁄8" long.
Tool Specifications:
Voltage: 14.4 volts
Battery Ampacity: 1700 mAh
RPM: 4000 rev/min
Weight: 4.9 lbs. (2.2 kg)
Height: 10 inches (254 mm)
Length: 13.8 inches (350 mm)
Width: 2.8 inches (70 mm)
Recharge Time: 1 hour
Screw Drives/Charge: see chart on reverse side
Fastener Capacity: 50 screws (one strip)
Torque Delivered: 25 in-lbs
Generated Noise: 74 dBA
Vibration: less than 2.5m/sec2
Model DS162-14v

For additional information on how Senco fastening systems will save you time, reduce costs and increase quality, call your nearest
Authorized Senco Dealer or Distributor listed in the Yellow Pages under “Staples,” or call our toll-free Action Line: 1-800-543-4596.
www.senco.com
DuraSpin™Cordless Screw Driver
Powerful 14.4 volt battery
Provides optimum balance of power,
weight and run-time across the full
range of screws
Each tool comes complete with:
Two 14.4 volt batteries,
one-hour battery charger,
2 spare drive bits, and a
rugged carrying case.
Screw guard
Guides screws while protecting
hands and clothing
Battery charger
Provides full charge in one
hour—increases productivity
and decreases downtime
Comfortable grip and
cushioned trigger
Ergonomically designed for extra
comfort and better productivity
with less exertion
Second-hand grip
Helps combat worker fatigue
Super-tough drive bits
The longest-lasting drive
bits available
Belt hook
Lets DuraSpin go where you go
Quick-bit release
No chuck—bits pop out and pop in
Adjustable nose piece
With easy-to-read length markings,
adjusts to screw lengths of 1 to 1 5⁄8inches
4000 RPM high-speed motor
Drives screws as fast as you do
Adjustable depth-of-screw drive
For flush drive or countersink
Patented clutch design
Extends motor and bit life by disengaging
when drive is completed
©2000 by Senco Products, Inc. Order MK488 Litho in U.S.A.
Typical Applications and
Screws Used Average Number of Screws Driven Per Charge Screw Reorder Code
Drywall to Wood
Drywall to Light Gauge Steel
Drywall to Heavy Gauge Steel
#6 X 1
1
/ 4 " Screws 975
#6 X 1
5
/ 8 " Screws 650
#6 X 1
1
/ 4 " Screws
925 (25 GAUGE)
900 (20 GAUGE)
#6 X 1
1
/ 4 " Screws 550 (18 GAUGE)
06A125P
#6 X 1" Screws 1100 06A100PB
06A162P
06B125P
06C125C
These are representative averages. Your results may vary based on specific work conditions.
Model DS162-14v