Senco DuraSpin DS300-AC User manual

Fastening Solutions™
The powerful SENCO DS300-AC is designed for
high-volume, high-speed screw applications.
Professional remodelers, contractors and DlYers will
appreciate the convenience of the 3300 rpm collated
screw system, which increases productivity by
eliminating the need for handling loose screws.
The DS300-AC has corded power to drive
11/4" – 3" screws into even the toughest work surfaces.
With the built-in extension you can adjust tool to the
proper height to speed productivity and save your back
and knees.
Applications:
Ideal for decking, floor sheathing, underlayment and
cement board.
Features and Benefits:
• 3300 RPM high-torque AC motor drives screws
without bogging down
• Drives 11/4" – 3" screws, even into hard woods and
composites
• Easy depth-of-drive adjustment regulates the precise
amount of countersink
• Fast and simple adjustable height extension
• Ergonomically designed to position hands directly over
screw for precise straight drives
• Comfortable grip for less exertion
• Reverse switch to back out driven screws
• Trigger lock for continuous work
• Patented clutch design means long-lasting durability
• Fast and easy loading of screws
• Easy bit change – from Phillips® to square
• Super-tough drive bits – the longest lasting bits
available
• Corded power for the demanding needs of
professional remodelers and contractors
• High-quality ten-foot cord
• One-year warranty
• Each kit comes complete with tool, spare drive bits,
wrenches, spare non-slip nose pads and rugged
carrying case
Tool Specifications:
Item Code: 1P0001N
Voltage: 120
Current: 5.2 amps
Frequency: 60Hz
RPM: 3300
Weight: 8.7 lbs. (3.9 kg)
Height: 67/8" (175 mm)
Length: collapsed 31.5" (800 mm),
fully extended 41.5" (1054 mm)
Width: 4" (102 mm)
Fastener Capacity: 50 screws (one strip)
Torque Delivered: 85 in-lbs
Generated Noise: 74 dBA
Vibration: less than 2.5 m/sec2
Fastener Specifications:
Screw Lengths: 11/4" – 3" (32 mm – 75 mm)
Screw Diameters: #6 – #10
(see reverse side for chart)
DuraSpin ® DS300-AC
Corded Collated Screwdriver
www.senco.com ©2005 by Senco Products, Inc.

Fastening Solutions™
For additional information on how SENCO power fastening systems will save you
time, reduce costs and increase quality, call your nearest Authorized SENCO
Dealer or Distributor listed in the Yellow Pages under "Staples," or call our toll-free
Action Line: 1-800-543-4596.
www.senco.com ©2005 by Senco Products, Inc.
Reverse switch, to back
out driven screws
Telescoping adjustable-height extension
Trigger lock
Adjustable
depth-of-screw drive
Adjustable
nose piece
High-quality 10-foot cord (3 m)
Drives 11/4" – 3" screws
(32 mm – 75 mm)
Easy-loading strip guide
Ergonomic design – drives
screws effortlessly
Drywall to Wood
DuraSpin DS300-AC
Corded Collated Screwdriver