Sencore MRD 6000 User manual

January 2020
Form 8187C www.sencore.com | 1.605.978.4600 Revision 1.2
MRD 6000
4K UHD Receiver Decoder
User Manual

MRD 6000 –User Manual
Page 2 (112)
Copyright
© 2020 Sencore, Inc. All rights reserved.
3200 Sencore Drive, Sioux Falls, SD USA
www.sencore.com
This publication contains confidential, proprietary, and trade secret information. No part of this document may
be copied, photocopied, reproduced, translated, or reduced to any machine-readable or electronic format
without prior written permission from Sencore. Information in this document is subject to change without notice
and Sencore Inc. assumes no responsibility or liability for any errors or inaccuracies. Sencore, Sencore Inc,
and the Sencore logo are trademarks or registered trademarks in the United States and other countries. All
other products or services mentioned in this document are identified by the trademarks, service marks, or
product names as designated by the companies who market those products. Inquiries should be made directly
to those companies. This document may also have links to third-party web pages that are beyond the control
of Sencore. The presence of such links does not imply that Sencore endorses or recommends the content on
those pages. Sencore acknowledges the use of third-party open source software and licenses in some
Sencore products. This freely available source code can be obtained by contacting Sencore Inc.
About Sencore
Sencore is an engineering leader in the development of high-quality signal transmission solutions for the
broadcast, cable, satellite, IPTV, telecommunications, and professional audio/video markets. The
company’s world-class portfolio includes video delivery products, system monitoring and analysis solutions,
and test and measurement equipment, all designed to support system interoperability and backed by best-
in-class customer support. Sencore meets the rapidly changing needs of modern media by ensuring the
efficient delivery of high-quality video from the source to the home. For more information, visit
www.sencore.com.

MRD 6000 –User Manual
Page 3 (112)
Revision History
Date
Version
Description
Author
11/06/2018
1.0
Initial Release
GAK
10/9/2019
1.1
Update for 4.1.0 and 4.2.0 Release
BCR
1/27/2020
1.2
Appending to S2X Module Specs
BCR

MRD 6000 –User Manual
Page 4 (112)
Safety Instructions
Read these instructions
Keep these instructions
Heed all warnings
Follow all instructions
Do not use this apparatus near water
Clean only with dry cloth
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Do not expose this apparatus to dripping or splashing and ensure that no objects
filled with liquids, such as vases, are placed on the apparatus.
To completely disconnect this apparatus from the AC Mains, disconnect the
power supply cord plug from the AC receptacle.
The mains plug of the power supply cord shall remain readily operable.
Damage Requiring Service: Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the following conditions:
oWhen the power-supply cord or plug is damaged.
oIf liquid has been spilled, or objects have fallen into the product.
oIf the product has been exposed to rain or water.
oIf the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of the controls may
result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
oIf the product has been dropped or damaged in any way.
oThe product exhibits a distinct change in performance.
Replacement Parts: When replacement parts are required, be sure the service
technician uses replacement parts specified by Sencore, or parts having the
same operating characteristics as the original parts. Unauthorized part
substitutions made may result in fire, electric shock or other hazards.

MRD 6000 –User Manual
Page 5 (112)
SAFETY PRECAUTIONS
There is always a danger present when using electronic equipment.
Unexpected high voltages can be present at unusual locations in defective
equipment and signal distribution systems. Become familiar with the equipment
that you are working with and observe the following safety precautions.
Every precaution has been taken in the design of your MRD 6000 to ensure that
it is as safe as possible. However, safe operation depends on you the operator.
Always be sure your equipment is in good working order. Ensure that all points
of connection are secure to the chassis and that protective covers are in place
and secured with fasteners.
Never work alone when working in hazardous conditions. Always have another
person close by in case of an accident.
Always refer to the manual for safe operation. If you have a question about the
application or operation call Sencore for assistance.
WARNING –To reduce the risk of fire or electrical shock never allow your
equipment to be exposed to water, rain or high moisture environments. If exposed
to a liquid, remove power safely (at the breaker) and send your equipment to be
serviced by a qualified technician.
To reduce the risk of shock the MRD 6000 must be connected to a mains socket
outlet with a protective earthing connection.
For the MRD 6000 the mains plug is themain disconnect and should remain readily
accessible and operable at all times.
The MRD 6000 is equipped with an internal system battery. The MRD 6000 must
be sent to Sencore service for replacement of this battery.
When installing the MRD 6000 utilizing the DC power supply, the power supply
MUST be used in conjunction with an over-current protective device rated at 50V,
5A, type: Slow-blo, as part of battery-supply circuit.
To reduce the risk of shock and damage to equipment, it is recommended that the
chassis grounding screw located on the rear of the MRD 6000 –be connected to
the installation’s rack, the vehicle’s chassis, the battery’s negative terminal, and/or
earth ground.
CAUTION –Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.

MRD 6000 –User Manual
Page 6 (112)
FCC Class A Information
The MRD 6000 has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his or her own expense.
Shielded cables must be used with this unit to ensure compliance with the Class A FCC
limits.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
Dolby Digital Information
This product has been manufactured under license from Dolby Laboratories.
“Dolby Digital”, “AC-3”, and “Dolby Digital Plus”are licensed trademarks of Dolby
Laboratories.

MRD 6000 –User Manual
Page 7 (112)
Package Contents
The following is a list of the items that are included along with the MRD 6000:
1. Declaration of Conformity
2. AC Power Cable
3. Quick Start Guide
Note: If any option cables were ordered with the MRD 6000, they will be included in the
box as well.
If any of these items were omitted from the packaging of the MRD 6000 please call 1-800-
SENCORE to obtain a replacement. Manuals for Sencore products can be downloaded at
www.sencore.com
1) Declaration of Conformity
2) AC Power Cable
3) Quick Start Guide

MRD 6000 –User Manual
Page 8 (112)
Table of Contents
Section 1 Overview...........................................................................................10
1.1 Product Introduction...................................................................................................11
1.2 Front Panel Overview ................................................................................................11
1.3 Rear Panel Overview.................................................................................................12
1.4 Baseband Video Outputs...........................................................................................12
1.4.1 SD-SDI Output......................................................................................................13
1.4.2 HD-SDI Output .....................................................................................................13
1.4.3 UHD/4K Output.....................................................................................................13
1.5 Cooling.......................................................................................................................14
1.6 Rack Information........................................................................................................14
Section 2 Installation........................................................................................15
2.1 Rack Installation ........................................................................................................16
2.2 Power Connection .....................................................................................................16
2.3 AC Power Connection ...............................................................................................16
2.4 AC Dual Redundant Power Connection (optional)....................................................17
2.5 Maintenance ..............................................................................................................17
2.6 Network Setup via Front Panel..................................................................................17
2.6.1 Static IP Address/Subnet Mask/Gateway.............................................................17
2.6.2 DHCP....................................................................................................................18
Section 3 Operating the Front Panel...............................................................20
3.1 MRD 6000 Front Panel Overview..............................................................................21
Section 4 Operating the Web Interface ...........................................................23
4.1 MRD 6000 Web Interface Overview..........................................................................24
4.1.1 Logging into the MRD 6000 Web Interface..........................................................24
4.1.2 Hiding Unused Inputs ...........................................................................................24
4.1.3 Buttons and Status Indicators...............................................................................25
4.1.4 Drag and Drop Menus..........................................................................................26
4.2 Main Panel.................................................................................................................27
4.2.1 Configuring Active Inputs......................................................................................28
4.2.2 Configuring ASI Input ...........................................................................................30
4.2.3 Configuring MPEG/IP Input..................................................................................30
4.2.4 Configuring DVB-S/S2/S2X Input.........................................................................33
4.2.5 Configuring DVB-S/S2 Input.................................................................................35
4.2.6 Configuring 8VSB/QAM Input...............................................................................38
4.2.7 Configuring Turbo PSK Input ...............................................................................39
4.2.8 Configuring DVB-T2/C2/ISDB-T Input..................................................................41
4.2.9 Configuring DVB-CI Descrambling.......................................................................43
4.2.10 Configuring BISS Descrambling...........................................................................45
4.2.11 Configuring Service Selection ..............................................................................48
4.2.12 Configuring Primary Video....................................................................................51
4.2.13 Configuring Audio.................................................................................................53
4.2.14 Configuring Ancillary Data....................................................................................54
4.2.15 Configuring Primary SDI Ports 1 & 2....................................................................55
4.2.16 Configuring Secondary SDI Ports 3 & 4...............................................................60
4.2.17 Configuring Analog Audio Output.........................................................................62
4.2.18 Configuring Digital Audio Output..........................................................................63
4.2.19 PID Filter...............................................................................................................63
4.2.20 Configuring ASI Output.........................................................................................65
4.2.21 Configuring the MPEG/IP Outputs .......................................................................65

MRD 6000 –User Manual
Page 9 (112)
4.2.22 Configuring the MPEG/IP MPE Outputs...............................................................68
4.2.23 Viewing PSIP Information.....................................................................................69
4.3 Admin Panel ..............................................................................................................70
4.3.1 Changing Unit Password......................................................................................71
4.3.2 Profiles..................................................................................................................71
4.3.3 General Settings...................................................................................................72
4.3.4 Unit Network Configuration...................................................................................73
4.3.5 MPEG/IP Network Configuration..........................................................................75
4.3.6 Licensing...............................................................................................................77
4.3.7 Date/Time.............................................................................................................78
4.3.8 Configuring SNMP................................................................................................79
4.3.9 Syslog...................................................................................................................81
4.3.10 Updating the MRD 6000.......................................................................................81
4.3.11 Reboot Unit...........................................................................................................83
4.3.12 Reset Defaults......................................................................................................83
4.4 Reporting Panel.........................................................................................................83
4.4.1 Active Alarms........................................................................................................84
4.4.2 Event Logs............................................................................................................85
4.4.3 Configuring the Logs ............................................................................................86
4.5 About Panel ......................................................................................................................87
4.6 System Recovery..............................................................................................................88
Section 5 Appendices.......................................................................................89
Appendix A –Acronyms and Glossary....................................................90
Appendix B –Error and Event List...........................................................93
Appendix C –Specifications.....................................................................95
Appendix D –Pinouts for Analog Audio and Relay Connectors.........105
Appendix E –MRD 6000 Audio Explanation .........................................106
Appendix F –MRD 6000 Discrete Audio Configuration .......................109
Appendix G –Open Source Software.....................................................109
Appendix H –Warranty ...........................................................................111
Appendix I –Support and Contact Information...................................111

MRD 6000 –User Manual
Page 10 (112)
Section 1 Overview
Introduction
This section includes the following topics:
1.1 Product Introduction...................................................................................................11
1.2 Front Panel Overview ................................................................................................11
1.3 Rear Panel Overview.................................................................................................12
1.4 Baseband Video Outputs...........................................................................................12
1.5 Cooling.......................................................................................................................14
1.6 Rack Information........................................................................................................14

MRD 6000 –User Manual
Page 11 (112)
1.1 Product Introduction
The MRD 6000 4K/UHD receiver decoder continues Sencore’s long history of leadership
and innovation in professional receiver/decoders. It is built with the latest-generation
4K/UHD ASIC decoder technology delivering reliable, cost-effective monitoring, turn-
around, signage, hospitality, and enterprise solutions.
The product boasts a full complement of cutting-edge features, including HEVC
decoding up to MP@HT and M10P@HT to L4.1 on streams to 40 Mbps for decoding
professional 4K and consumer UHD formats with 4:2:0 chroma 8 and 10 bit. It outputs
HDMI 2.0 and 4x3G-SDI of 4K/UHD to 4Kp60 and 2160p60 formats. It includes legacy
format decoding of MPEG 2 and H.264 up to [email protected].
The MRD 6000 decodes and outputs 4K/UHD video and includes core features required
in professional video delivery networks. Every MRD 6000 ships with a full complement of
basic inputs and outputs, including ASI input and output, SD-SDI/HD-SDI outputs, and
an HDMI digital video output. The HDMI output makes monitoring as easy as finding the
nearest standard consumer television or PC monitor.
The MRD6000 further features MPEG/IP I/O, DVB-S/S2/S2X satellite inputs, QAM/VSB
RF receiver, DVB-T/T2, C/C2, & ISDB-T inputs, BISS descrambling, and dual DVB-CI
CAM slot options. Its configurable feature set makes the MRD 6000 the ideal choice for
contribution reception or demanding distribution applications which require a future-proof
set of specifications.
The receiver maintains Sencore’s long tradition of ease of use, with a straight-forward
web interface accessible via all major browsers and complete control of the unit via the
front panel keypad, and is backed by Sencore’s best-in-class staff of ProCare support
engineers.
1.2 Front Panel Overview
The MRD 6000 can be controlled from the front panel using the LCD screen and buttons
that are shown below. A detailed description of using the front panel can found in
Section 3. All hardware listed below comes standard except for the DVB-CI slots which
are a factory installed option.
MRD6000 Chassis Front Panel
1
2
4
3
3
3
5
3
6
3

MRD 6000 –User Manual
Page 12 (112)
1. LCD screen: Shows menus for user status and unit control
2. Input Indicator: Light indicates input signal presence (green) or absent (red)
3. Error Indicator: Light indicates red when unit is in alarmed condition
4. Up, Down, Left, Right buttons: Provides navigation/entry within LCD screen
menus
5. Back and Enter Buttons: Provides navigation within LCD screen menus
6. 2 DVB-CI Slots (Factory Option)
1.3 Rear Panel Overview
The MRD 6000 comes standard with all of the hardware back panel features shown and
listed below except where noted as a factory installed option. Option cards are available
for the MRD 6000. Examples include a Quad Input DVB-S/S2/S2X card or dual port
MPEG/IP Input/Output card. ASI is a standard input and output on all MRD 6000 units.
MRD6000 Chassis Back Panel
1. RJ45 Management Port(s)
2. Relay Output Connector
3. Digital Audio Outputs
4. 15-Pin Analog Audio Connectors (See Appendix D)
5. CVBS BNC Output
6. SDI Outputs (Five BNC provide Quad3G/3G/HD-SDI/SD-SDI)
7. Digital Video Output Connector (HDMI)
8. ASI Input and ASI Output Connectors
9. Chassis Ground
10. Optional Dual Power Supply
11. Option Card Slot #1 (factory installed)
12. Option Card Slot #2 (factory installed)
1.4 Baseband Video Outputs
Each of the six BNC ports, as seen in the figure from section 1.3, fall into one of three
categories: Primary SDI ports, Secondary SDI ports or CVBS ports.
SDI/CVBS BNC Outputs from Back Panel
10
1
2
3
4
6
11
12
1
1
5
7
8
9
1B
CVBS
1A
2
3
4

MRD 6000 –User Manual
Page 13 (112)
Ports 1A, 1B and 2 are Primary SDI ports while ports 3 and 4 are Secondary SDI ports.
The CVBS port is for the composite video output. The output behavior of these BNC
ports is directly related to the Primary Video output settings (see section 4.2.12) and the
Simultaneous HD/SD License.
1.4.1 SD-SDI Output
When an SD video resolution is set on the Primary Video output format, both Primary
SDI ports and Secondary SDI ports will output SD-SDI. The CVBS port will output
composite video at the same frame rate and resolution as the Primary Video output
format.
1.4.2 HD-SDI Output
When an HD resolution is set on the Primary Video output format, the baseband video
output port behavior will depend on whether the MRD 60601 Simultaneous HD/SD
license is licensed or unlicensed.
1.4.2.1 Simultaneous HD/SD Unlicensed
When an HD video resolution is set on the Primary Video output format and MRD 60601
Simultaneous HD/SD is unlicensed, both Primary SDI ports and Secondary SDI ports
will output HD-SDI. The CVBS port will have no video output.
1.4.2.2 Simultaneous HD/SD Licensed
When an HD video resolution is set on the Primary Video output format and MRD 60601
Simultaneous HD/SD is licensed, the Primary SDI ports will output HD-SDI. The
Secondary SDI ports will downconvert the resolution set on the Primary Video output,
and output SD-SDI. The CVBS port will output composite video at the same frame rate
and resolution as the Secondary Video output format.
1.4.3 UHD/4K Output
When a UHD/4K video resolution is set on the Primary Video output format, SDI output
ports labeled 1A, 2, 3, and 4 are used to output UHD via quad 3G-SDI.
Simultaneous HD-SDI Output with UHD/4K
When using Two Sample Interleave (see section 4.2.15.3 for configuring Output
Mapping), the MRD 6000 provides a simultaneous HD-SDI output. In Two Sample
Interleave mode, Port 1A contains ¼ of the image pixels. Port 1B will output a mirror
image of the signal on port 1A. Therefore, when using any UHD/4K output formats with
Two Sample Interleave, the Port 1B output will be a HD 1080 formatted signal at the
same frame rate as the UHD/4K format.

MRD 6000 –User Manual
Page 14 (112)
For example, if the MRD 6000 has a Primary Video output format set to 3180x2160p 50
fps, SDI port 1B will output HD-SDI at 1080p 50 fps.
1.5 Cooling
The MRD 6000 is cooled via forced induction through the front of the unit and exhausted
through the vents in the rear of the chassis. The MRD 6000 is equipped with a temperature
controlled status indicator. If the temperature inside the unit exceeds 60°C the red “Error”
text will illuminate on the front panel and a description of the error will appear in the “Error
List.”
1.6 Rack Information
The MRD 6000 is intended to be mounted in a standard 19” rack. It occupies 1RU of rack
space and the connections are all on the rear of the unit.

MRD 6000 –User Manual
Page 15 (112)
Section 2 Installation
Introduction
This section includes the following topics:
2.1 Rack Installation ........................................................................................................16
2.2 Power Connection .....................................................................................................16
2.3 AC Power Connection ...............................................................................................16
2.4 AC Dual Redundant Power Connection (optional)....................................................17
2.5 Maintenance ..............................................................................................................17
2.6 Network Setup via Front Panel..................................................................................17

MRD 6000 –User Manual
Page 16 (112)
2.1 Rack Installation
To install the MRD 6000 into a rack use the following steps:
1. Determine the desired position in the rack for the MRD
6000 making sure that the air intake on the front of the
unit and the exhausts on the sides of the unit will not be
obstructed.
2. Insert the rack mount clips into place over the
mounting holes in the rack.
3. Slide the MRD 6000 into position in the rack.
4. Secure the MRD 6000 to the rack by installing the four
supplied screws through the front mounting holes and
tightening.
5. If needed, secure a grounding wire use the grounding
location on the rear panel of the MRD 6000. See
Section 1.3 for grounding location.
2.2 Power Connection
Using the proper power connections is vital to the safe operation of the MRD 6000. Only
use the supplied 3-prong power connector or one with equal specifications. NEVER
tamper with or remove the 3rd –prong grounding pin. This could cause damage to the
MRD 6000, personnel and/or property.
2.3 AC Power Connection
The MRD 6000 is intended for use on either 120V or 240V systems. The power supply
will automatically detect the system it is connected to. To hook up the power use the
following steps:
1. Locate the AC power cord that was included with the MRD 6000.
2. Plug the female end of the power cord (end with no prongs) into the back of the
unit.
3. Locate a protected outlet (usually inside of the rack) to plug the male end of the
power cable into.

MRD 6000 –User Manual
Page 17 (112)
2.4 AC Dual Redundant Power Connection (optional)
The Dual Redundant option allows the MRD 6000 to be powered by two separate
supplies either operating 120V or 240V systems. The power supply will automatically
detect the system it is connected to. To hook up the power use the following steps:
1. Locate the AC power cord that was included with the MRD 6000.
2. Plug the female end of the power cord (end with no prongs) into the back of the
unit.
3. Locate a protected outlet (usually inside of the rack) to plug the male end of the
power cable into.
2.5 Maintenance
The MRD 6000 is a maintenance-free piece of equipment. There are no user serviceable
parts on the inside of the unit.
2.6 Network Setup via Front Panel
The MRD 6000 can be setup on a network connection to allow remote management and
SNMP configuration. For these features to work, the network settings for the MRD 6000
must first be configured properly for the network it is connected to.
2.6.1 Static IP Address/Subnet Mask/Gateway
To setup the MRD 6000 with a static IP address, use the following steps:
1. Press the button.
2. Use the and buttons to
move the cursor to “Admin”, then
press the button.
3. Use the and buttons to
move the cursor to “Unit
Networking”, then press the
button.
Note: The first menu displayed is
status menu. In order to begin making
changes to networking settings press
the button and the ‘>’ cursor
will appear.
Main Menu ↔↕
Baseband Outputs
Transport Stream Outputs
>Admin
Active Errors
Admin ↔↕
>Unit Networking
System Time
About System
Syslog
Configure Network ↔↕
Host Name:
Primary DNS: 172.16.0.86
Second DNS: 172.16.0.153
IP Mode: DHCP

MRD 6000 –User Manual
Page 18 (112)
4. Use the and buttons to
move the cursor to “IP Mode”, then
press the button.
5. Use the and buttons to
change the selection to “Static” then
press the button.
6. The cursor will now be on “IP”.
7. Use the and buttons to
select the column and the and
buttons to change the IP
Address, then the button to
save the selection.
8. The cursor will now be on “Mask”.
9. Use the and buttons to
select the column and the and
buttons to change the Subnet
Mask, then the button to save
the selection.
10. The cursor will now be on
“Gateway”.
11. Use the and buttons to
select the column and the and
buttons to change the Default
Gateway, then the button to
save the selection.
Note: It may take up to a minute for the MRD 6000 to obtain an IP address.
During this time the unit will display a “busy” message under “Gateway”.
2.6.2 DHCP
The MRD 6000 can be configured to use DHCP to obtain an IP address/Subnet
Mask/Gateway.
Configure Network ↔↕
Host Name:
Primary DNS: 172.16.0.86
Second DNS: 172.16.0.153
>IP Mode: DHCP
Configure Network ↔↕
Host Name:
Primary DNS: 172.16.0.86
Second DNS: 172.16.0.153
>IP Mode: Static
Configure Network ↔↕
Primary DNS: 172.16.0.86
Second DNS: 172.16.0.153
IP Mode: Static
IP: 010.000.007.152
Configure Network ↔↕
Second DNS: 172.16.0.153
IP Mode: Static
IP: 010.000.007.152
Mask: 255.255.000.000
Configure Network ↔↕
IP Mode: Static
IP: 010.000.007.152
Mask: 255.255.000.000
Gateway: 010.000.001.003

MRD 6000 –User Manual
Page 19 (112)
1. Press the button.
2. Use the and buttons to
move the cursor to “Admin”, then press
the button.
3. Use the and buttons to
move the cursor to “Unit Networking”,
then press the button.
Note: The first menu displayed is status
menu. In order to begin making changes
to networking settings press the
button and the ‘>’ cursor will appear.
4. Use the and buttons to
move the cursor to “IP Mode”, then
press the button.
5. Use the and buttons to
change the selection to “DHCP” then
press the button.
Note: It may take up to a minute for the MRD 6000 to obtain an IP address.
During this time the unit will display a “busy” message next to DHCP.
Main Menu ↔↕
Baseband Outputs
Transport Stream Outputs
>Admin
Active Errors
Admin ↔↕
>Unit Networking
System Time
About System
Syslog
Configure Network ↔↕
Host Name:
Primary DNS: 172.16.0.86
Second DNS: 172.16.0.153
IP Mode: Static
Configure Network ↔↕
Host Name:
Primary DNS: 172.16.0.86
Second DNS: 172.16.0.153
>IP Mode: Static
Configure Network ↔↕
Host Name:
Primary DNS: 172.16.0.86
Second DNS: 172.16.0.153
>IP Mode: DHCP

MRD 6000 –User Manual
Page 20 (112)
Section 3 Operating the Front
Panel
Introduction
This section includes the following topics:
3.1 MRD 6000 Front Panel Overview..............................................................................21