Senect VIS-LED User manual

Alarm lamp VIS-LED
MANUAL

Type
2
Type
Product name:
SENECT®alarm lamp VIS-LED
Type:
VIS-LED
Art.-No.:
3200
Producer:
SENECT GmbH & Co. KG
An 44 –Nr. 11
76829 Landau / Germany
Important note:
Please read this manual carefully and store it so that you can use
it later. Read the warning and safety notes attentive.
More information and latest software releases or documents can
be downloaded from:
www.senect.de
Further information, application descriptions and answers to
frequently asked questions can be also found on the SENECT
Forum:
http://forum.senect.de
© SENECT GmbH & Co. KG - FW 00.80

Table of contents
3
Table of contents
Type............................................................................................... 2
Table of contents........................................................................... 3
Used symbols and wording ........................................................... 4
General Security Notes.................................................................. 5
Intended use.................................................................................. 6
Getting started .............................................................................. 6
Scope of delivery ....................................................................... 6
Note........................................................................................... 6
Installation and start-up............................................................ 7
Technical data ............................................................................. 10
Information about the correct disposal ...................................... 11
Guarantee.................................................................................... 11

Used symbols and wording
4
Used symbols and wording
DANGER!
Warning of life threatening
dangers.
WARNING!
Warning of possible life
threatening and / or severe
irreversible injuries.
ATTENTION!
Warning of possible medium
or slight injury.
ATTENTION!
Follow the notes to avoid
damage of equipment
NOTE!
Further information for the
use of the device!
ATTENTION!
Warning of electrical shock.

General Security Notes
5
General Security Notes
The alarm lamp is an electric device designed for visually
alarming the user of the SENECT control units in case of a
user-defined alarm.
Since it is an electric product the common
prerequisites for a safe instrument usage must be
fulfilled. Ensure that all cables are installed safely
so that no obstacles for persons are built and all. Mount all
cables and electric devices protected against direct
environmental impacts like overheating by direct sunlight
and water. Even if the product is protected against spray
water, the product´s lifetime will be elongated, if it is
mounted on a protected place.
The operating temperature of the device must be between -
25°C and +75°C.
The device is designed to be operated by professional users.
It can be also operated by children over the age of 8 years
and persons with limited physical, sensorial or cognitive
ability, if they are supervised, trained in the operation of the
device, able to operate the device safely and if they
understand potential risks resulting from the operation. It is
for children or persons with limited physical, sensorial or

Intended use
6
cognitive ability not allowed to perform any maintenance
works.
Please store this manual. We suggest the storage a copy of
the manual in the vicinity of the device.
Technical and optical changes of this manual are subject to
alterations.
Intended use
The alarm lamp is an electric device designed for visually
alarming the user of the SENECT control units in case of a
user-defined alarm.
The alarm lamp is developed for the use in industrial
aquaculture applications.
Getting started
Scope of delivery
o1 x Alarm lamp VIS-LED
o1 x Manual
Note
Please check directly after delivery, that the
package is not destroyed or damaged or was
opened before. Please check also, that all parts as

Getting started
7
listed above are included. If anything is missing or broken,
please contact us as soon as possible within 14 days.
Unfortunately, we cannot accept later information of
damage, which happened during the transport.
Installation and start-up
Mount the alarm lamp at a place in the vicinity of
your control unit where you can see it best.
To mount the alarm lamp, the upper transparent
part of the housing must be opened by rotating this part
against the bottom part.
In the bottom part, there are two protection caps inserted
which cover the mounting holes (see Fig. 1). Remove these
two caps and mount the bottom at the location with 2
screws.
Connect the green plug of the alarm lamp to one of the
SENECT controllers actuator output ports („OUT“).

Getting started
8
Fig. 1: Mounting the alarm lamp.

Getting started
9
Select the function „Alarm“for this output port in the menu
of the controller. Now, the alarm lamp will be switched on in
case the controller detects an alarm. You can define the
alarm setting at each sensor under „Alarm thresholds“.
Getting started –short version
1. Open housing by rotation.
2. Remove protection caps.
3. Mount the bottom part.
4. Close the housing.
5. Connect cable to controller (actuator plug „OUT“).
6. Select the function „Alarm“ this ouput port.
Now, the alarm lamp is ready to be used.

Technical data
10
Technical data
Dimensions housing:
Ø 61,8 x 62,8 mm
Material:
PC, MPPO
Cable length:
5 m
Voltage:
24 V DC
Power consumption:
1,2 W
Temperature range:
-25°C to +70 °C
Ingress protection:
IP65

Information about the correct disposal
11
Information about the correct disposal
Your device is well packed at delivery. Please
dispose the packaging material accordingly to the
regulations in your country.
Do not throw the product in the casual litter bin. Make sure
you are informed about the local disposal regulations and
dispose your product accordingly. Alternatively, you can also
send the product back to the producer.
The SENECT GmbH & Co. KG is member of the Stiftung
Elektro-Altgeräte Register and the products are registered
(WEEE-Reg.-Nr.: DE37193510).
Guarantee
Please check at delivery of your device, that all
parts are delivered completely and that they
function correctly. In case of any claims, contact us
immediately per email or phone ([email protected] or +49-
6341 - 95 95 210). Please describe your claim as detailed as
possible so that we can provide a solution as fast as possible.
The product has a guarantee of 1 year and a warranty of 2
years. Furthermore, the § 377 HBG (German law) is valid.