Sennheiser e 609 silver User manual

e 609 silver
Instruction manual

e 609 | 2/7
Delivery includes
Delivery includes
• e 609 silver
• pouch
• quick guide
• safety guide
Product overview
FRONT
2
13
1. Sound inlet basket
2. XLR-3 connector
3. Front

e 609 | 3/7
Installation
Installation
Attaching the microphone
Screw the microphone clamp to a stand.
Place the microphone with its back end into the microphone clamp.
Orient the microphone together with the microphone clamp.
Connecting the microphone
Connect the XLR-3 socket of the microphone cable (optional accessories) to the XLR-3 socket of
the microphone.

e 609 | 4/7
Operation
Operation
Positioning the microphone
Position the microphone between the dust cap and surround.
The front must face the loudspeaker.
It is vital to observe the following notes:
Position Resulting sound Commentary
A many trebles
aggressive sound microphone directed towards the dome of the loudspeaker
B less trebles, more lower
mids, smoother sound
balanced, natural sound
good starting position:
microphone directed towards the middle between
dome and edge of the loudspeaker
If necessary, turn the microphone by approx. 30°
towards the edge.
C less trebles, more lower
mids, smoother sound microphone directed towards the edge of the loudspeaker
A B C

e 609 | 5/7
Cleaning and maintaining the e 609 silver
Positioning the monitor loudspeakers
To prevent feedback and crosstalk, postion your monitor loudspeakers in the angle area of the
highest cancellation of the microphone (approx. 135°).
135°
Cleaning and maintaining the e 609 silver
CAUTION
LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT!
Liquids entering the housing of the product can cause a short-circuit and damage the electronics.
Keep all liquids away from the product.
Do not use any solvents or cleansing agents.
Disconnect the products from the power supply system and remove rechargeable batteries and
batteries before you begin cleaning.
Clean all products only with a soft, dry cloth.

e 609 | 6/7
Specifications
Specifications
Transducer principle dynamic
Frequency response 40 - 15,000 Hz
Pick-up pattern super-cardioid
Sensitivity (free field, no load) 1.5 mV/Pa
Nominal impedance (at 1 kHz) 350 Ω
Min. terminating impedance 1 kΩ
Connector XLR-3
Dimensions 55 x 34 x 134 mm
Weight 140 g
Polar pattern
30°
0°
180°
150°
120°
60°
90°
0
5
10
15
20
25
dB
30°
0°
180°
150°
120°
60°
90°
125 Hz
250 Hz
500 Hz
1,000 Hz
2,000 Hz
4,000 Hz
8,000 Hz
16,000 Hz
Frequency response
dBV
50
100
200
500
1,000
2,000
5,000
10,000
20,000
Hz
- 50
- 60
- 70
- 80
- 90
- 40
0°, 1 m
0°, 5 cm

e 609 | 7/7
Overview of applications
Connector assignment
12
3
+
+
12
3
12
3
+ +
12
3
+
+
12
3
+
+
XLR 6.3 mm
XLR
6.3 mm
XLR
XLR
XLR
UNBALANCED
BALANCED
Overview of applications
Primary application
Secondary application
•••••
••
••••
••
•••
••
••••• •
•• ••• •••
•• •
•• •
•• •
•••
•• •
••
••••
••
••••• •
••
••• •
••••• •••
••
••
••• ••
e 602 II
e 604
e 608
e 609 silver
e 614
e 835
e 845
e 865
e 901
e 902
e 904
e 906
e 908
e 914
e 935
e 945
e 965